Operation Manual

62
How to Use
Mode Description
TILING
H MONITORS: Select the number of images obtained by horizontal division.
V MONITORS: Select the number of images obtained by vertical division.
POSITION: Select the area you want to enlarge.
FRAME COMP.:
When displaying an image across multiple monitors, you can select the
mode to compensate for the bezel widths for smooth and natural display.
ENABLE: When you select ON, the image in the selected area is enlarged on the screen.
HEAT STATUS
The statuses of the cooling fan, brightness, and internal temperature are displayed.
The cooling fan starts running according to the operating temperature or when
COOLING FAN is ON in the SCREEN SAVER menu. When the operating temperature
substantially exceeds the operation guaranteed range, the message “TEMPERATURE
WARNING” is displayed on the screen.
POWER ON DELAY
You can adjust the delayed time until the power-on mode is activated at the time of recovery
from the sleep mode or power-on.
The time is selectable from OFF and 2, 4, 6, 8, 10, 20, 30, 40, and 50 seconds.
TERMINAL SETTING
You can select the mode to display the HDMI1, HDMI2, or DVI-D signal according to their
signal format depending on their source device.
HDMI SIGNAL:
Select this setting when displaying HDMI1, HDMI2, or OPTION (when
an OPS-compliant computer is mounted).
Select FULL when displaying the signal that uses all 256 levels (from level
0 to 255). This mode is used primarily when input comes from a computer.
Select LIMITED when displaying the signal that uses 16 to 235 levels of
256 levels for each of R, G, and B. This mode is used primarily when input
comes from a video device.
HDMI MODE:
Select this setting when displaying the HDMI1 or HDMI2 signal.
Select HDMI-HD when the source device is a video device.
Select HDMI-PC when the source device is a PC.
DVI MODE:
Select this setting when displaying the DVI-D signal.
Select DVI-PC when the source device is a PC.
Select DVI-HD when the source device is a video device.
CLOSED CAPTION
You can select to display or hide captions.
OFF: Captions are hidden.
CC1: Captions are displayed in sync with the primary audio.
CC2: Information (related to the primary audio) is displayed without sync.
CC3: Captions are displayed in sync with the secondary audio.
CC4: Information (related to the secondary audio) is displayed without sync.
TT1/TT2/TT3/TT4:
Four types of information not related to the displayed images are
displayed. (For example, news and weather forecast.)
Check with each supplier of your video software and external video devices in advance
whether they are compliant with EIA-608-A.
If their video signals are not compliant with it, images may not be displayed correctly.
USB UPSTREAM
You can select either of the 2 upstream ports and distribute the signal to 2 downstream ports.
EXTERNAL: External computer is selected.
OPS: OPS-compliant computer is selected.
ADVANCED OPTION
RESET
The settings made in the ADVANCED OPTION menus are reset to the factory defaults.
However, HDMI MODE, DVI MODE, and DDC/CI aren’t reset.
Advanced Option