Use and Care Manual

TROUBLESHOOTING TIPS
Troubleshooting
Tips
Before calling for service, review this list. It may save you time and money. This list includes common
occurrences that are not the result of defective workmanship or materials in this appliance.
Problem Solution
Unit does not start
Make sure the dehumidi ers plug is connected  rmly into the wall outlet.
Check the house fuse/circuit breaker box.
Dehumidi er has reached its preset level or bucket is full.
Water bucket is not in the proper position.
Dehumidi er does
not dry the air as it
should
Not enough time to remove the moisture.
Make sure there are no curtains, blinds or furniture blocking the front or back of the
dehumidi er.
The humidity control may not be set low enough.
Check that all doors, windows and other openings are securely closed.
Room temperature is too low, below 41°F (5°C).
There is a water vapor source in the room.
The unit makes a
loud noise when
operating
Air  lter may be dirty. Clean  lter. Refer to Care and Cleaning section.
The unit is tilted instead of upright as it should be.
The  oor surface is not level.
Frost appears on
the coils
This is normal. The dehumidi er has Auto defrost feature.
Water on  oor
Hose to connector or hose connection may be loose.
Intend to use the bucket to collect water, but the back drain plug is removed.
ES, AS, P2, Eb
and E3 appear in
the display
These are error codes and protection code. Check Operating Instructions.
Page 14 User Manual