Operation Manual

34
MENU LANGUAGE
DVD menu language can be selected in this menu.
(1) Select MENU LANG in LANGUAGE SETUP page and press
or key.
(2) Press
key to select DVD menu language and press key.
■ Notes
Some DVD video discs may not include your pre-selected language. In this case, the DVD
video player automatically displays disc menus consistent with the disc’s initial language
setting.
Playing a disc.
1. Basic playback
(1) Turn on the power and select DVD input.
(2) The DVD startup screen will appear on the screen.
(3) Load the disc in the disc slot with the label side facing up. (If the disc has a label.)
Hold the disc without touching either of its surfaces, align it with the guides, and place
it in position.
■
Notes
Insert a disc horizontally into the DVD disc slot, do not jam or force it strongly, otherwise
the DVD may malfunction or the disc might be damaged.
(4) “LOADING” appears on the screen, then playback starts.
• A menu screen will appear on the screen, if the disc has a title menu.
• Press
on the remote control to select title, then press ENTER. Title is selected
and play commences.
(5) Press VOL [+] [-] to adjust the volume.
■ Notes
When using an amplifi er, adjust the volume with the amplifi er.
(6) Press
/
or to end playback.
Resume feature
• Depending on the disc you are playing, when you press STOP one time, the DVD memo-
rizes the location where playback is stopped. Press
/ or to resume the playback
from the stopped location.
• If you press
again or eject the disc, the DVD will clear the stopped location.
TDP-ET20 DVD Playback (Continued)