Operation Manual

27
Optimizing computer images
After your computer is connected properly and the computer’s image is on
the screen, you can optimize the image using the onscreen menus. For gen-
eral information on using the menus, see page 28.
• Adjust the Keystone, Contrast, or Brightness in the Picture menu
(page 29).
• Change the Aspect Ratio. Choose the option that best fits your input
source (page 29).
• Adjust the Color Temperature in the Advanced menu (page 31).
• Adjust the phase, Tracking, or Horizontal or Vertical position in the
Advanced menu (page 31).
• Once you have optimized the image for a particular source, you can
save the settings using Presets. This allows you to quickly recall these
settings later (page 30).
Presentation features
Several features are provided to make giving presentation easier. Here is an
overview, details are found in the menu section.
• The Blank button on the remote allows you to display a blank screen
instead of the active source. You can determine the color of this screen
(page 33).
• The Startup Logo option lets you change the default start up screen to a
blank or default screen (page 33).
• Two options, Power Save and Screen Save, are provided to automati-
cally shut down the projector after several minutes of inactivity or dis-
play a black screen. This helps preserve lamp life (page 32).