Operation Manual

3
Table of Contents
Introduction 4
Positioning the projector 5
Connecting a video device 6
Video connections 7
Video device connections 8
Composite video connection 8
S-video connection 8
Component video connection 9
VGA connection 9
Displaying video 10
Adjusting the image 10
Connecting a computer source 12
Required computer connections 12
Optional computer connections 12
Displaying a computer source image 13
Adjusting the image 14
Using the projector with Windows 98 for the first time 15
Shutting down the projector 16
Troubleshooting your setup 16
Using the remote control 24
Using the audio 25
Using the keypad buttons 25
Optimizing video images 26
Customizing the projector 26
Optimizing computer images 27
Presentation features 27
Using the menus 28
Picture menu 29
Settings menu 32
Maintenance 35
Cleaning the Lens 35
Replacing the Projection Lamp 35
Cleaning the Lamp Housing Screens 37
Appendix 38
Specifications 38
Accessories 38
For assistance with this projector 39
Projected image size 39
Red LED Behavior and Projector Errors 40
If you are experienced in setting up projection systems, use the Quick Setup
card that was included. For complete details on connecting and operating
the projector, refer to this User’s Guide.
Important Operating Considerations
Do not place the projector on a tablecloth or other soft coverings that may
block the front or back vents. Do not use a non-approved ceiling mount. In
the unlikely event of the bulb rupturing, thoroughly clean the area in front
of the projector and discard any edible items that may have been placed in
that area.
Do not place objects in
this area in front
2
f
t
(
.
6
m
)
of the projector