Operation Manual

23
Preparations
Connection
Before connection
• Readtheowner’smanualofthedeviceyouareconnectingtotheprojector.
• Somecomputerscannotbeusedwithorconnectedtothisprojector.
Check for an RGB output terminal, supported signal
p.43
, etc.
• Turnoffthepowerofbothdevicesbeforeconnecting.
• Thegurebelowshowssampleconnections.Thisdoesnotmeanthatallofthesedevices
can or must be connected simultaneously.
Notes
• MovingpicturesplayedbackoncomputersusingDVDsoftwaremayappearunnatural
when projected with this projector. However, it is not a malfunction of the projector.
• WhenanAUDIOOUTterminalisconnected,soundisnotoutputfromtheprojector
speaker.
• OutputvolumeofAUDIOOUTterminalcanbeadjustedbytheVOL+/- button.
• TheMONITOROUTterminaloutputsanalogRGBsignalsorcomponentvideosignals
(Y/PB/PR) from the COMPUTER IN terminals.
• AcomputermonitorusuallycannotacceptY/PB/PR signals correctly.
Computer (for control)Monitor
To RS-232C
terminal
To audio output
Audio cable
(not supplied)
Control cable
RGB cable
(supplied)
To RGB output
Computer
To audio input
Audio cable
(not supplied)
Video cable
(not supplied)
To S-video output
To video output
S-Video cable
(not supplied)
p.45