Operation Manual
31
Operations
30
Adjusting vertical distortion [auto]
2
Press the button.
The keystone distortion is automatically corrected. The icon appears during this
correction.
When adjustment is finished, the Distortion adjust menu appears again. For fine
adjustment, select [V-keystone adjust] by the
button and adjust image manually
by the
buttons.
Adjusting vertical distortion [manual]
1
Press the KEYSTONE button.
2
Select [V-keystone adjust] by the button.
3
Use the buttons for keystone adjustment.
Adjusting horizontal distortion [manual]
1
Press the KEYSTONE button.
2
Select [H-keystone adjust] by the button.
3
Use the buttons for keystone
adjustment.
When the adjustment is finished, the menu
automatically disappears. The menu also disap-
pears when the KEYSTONE or RETURN button is
pressed.
Notes
•To adjust both vertical and horizontal keystones, adjust vertical keystone at first.
• Depending on the amount of keystone adjustment and the content of images, some
information may be lost, or the picture quality may suffer.
■ Resizing image
The projected image can be resized (zoomed in/out).
1
Press the remote control’s RESIZE button.
Each time you press the RESIZE button, zoom ratio is up. You can keep
pressing.
Before correction
After correction
■ Using auto setting (Only for analog input from computer)
This function sets up the projector to the optimum state such as
sampling phase, frequency, screen position, and clamp for each
type of the input signal by using simple operations.
● Press the remote control’s AUTO SET
button.
For computer input, the icon will appear during processing.
You can set as well by selecting [Auto setting] in the Image
adjustment menu
p.38
.
Note
• The image may not be projected or auto adjustment/setting may not be performed
correctly for input signals other than those supported by the projector
p.53
,
p.54
.
• If auto setting fails adjustment, adjust manually with the Image adjustment menu
p.38
.
■ Correcting the keystone distortion
When the projector placement angle against the
screen is changed while projecting the image,
the picture will undergo keystone (trapezoidal)
distortion.
This projector is capable of correcting this keystone
distortion
.
1
Press the KEYSTONE button.
The Distortion adjust menu appears. By default, [Auto V-keystone adjust] is
selected.
Item Description
Automatically corrects the vertical distortion. Press .
Screen shrinking at bottom Screen shrinking at
top.
Screen shrinking on the left Screen shrinking on
the right.
Auto V-keystone
adjust
V-keystone
adjust
H-keystone
adjust
Using handy features
Control panel
Remote
Control
Before correction
After correction
Remote
Control