Operation Manual

28 29
Preparations
Connection
Before connection
Read the owner’s manual of the device you are connecting to the projector.
Some computers cannot be used or connected to this projector.
Check for an RGB output terminal and supported signal
p.78
.
Turn off the power of both devices before connecting.
•
•
•
Notes
The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 and 3 IN
terminals.
The MONITOR OUT connector will output no video signal (Digital signal) from the
COMPUTER 3 IN connector. If no input is selected, the MONITOR OUT terminal
outputs the input signals last selected for each input terminal.
Signals are output from MONITOR OUT terminal even in standby mode.
However, from AUDIO OUT terminal, no audio signal is output.
A computer monitor cannot accept Y/P
B/PR signals correctly.
The AUDIO IN 1, 2, and 3 terminals double for devices connected to COMPUTER
terminals 1, 2, and 3.
When an AUDIO OUT terminal is connected, sound is not output from the projector
speaker.
Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
•
•
•
•
•
•
•