Electronic Computing Scale Owner's Manual
10. PROGRAMMING PROCEDURES
10.21 FREE FORMAT SETTING
10-33
NOTES:
1. The following print items cannot be magnified.
① LOGO (1)
② Safe handling precautions
③ LOGO (2)
④ Barcode
⑤ LOGO for Frequent Shopper
⑥ Nutrition
⑦ FSP block
⑧ Ingredient
2. Base label format
According to Initial set #10-1, the base label format having the same width is selected. Therefore
it is imposible to select format having a width of 57 mm when the width of 80 mm is selected in the
initial set, and vice versa.
3. Data range
The valid range of each data is follows.
① Free Format No.: 1 to 3 for 57-mm and 80-mm wide labels.
The free format No. corresponds with label format #41 to 43 and #91 to 93 for Batch print.
Programmed free format data remains even though the label width is changed by the initial set.
This means that the H-9100N has up to 6 formats.
② Base label format No.: 57-mm wide: #10, 11, 13, 15, 16, 21, 23, 25, 26, 31, 33, 35, 36, 44
80-mm wide: #10, 11, 23, 44, 45, 46, 47
③ Label length (mm): 57-mm wide: 30 to 195
80-mm wide: 30 to 135
④ Label width (mm): 57 or 80 according to Initial set No. 10-1
⑤ Barcode height (mm): 0 to 30
⑥ X point (dot): 57-mm wide: 0 to 447
80-mm wide: 0 to 631
⑦ Y point (dot): 57-mm wide: 0 to 1560
80-mm wide: 0 to 1080
⑧ No. of ingredient lines: 0 to 38
⑨ No. of Ing. characters per line: 32 to 54 (default: 54)