Instruction Manual

- 33 -

EO1-11126

MA-1350-1 SERIES

NOTES: 1. If the PLU Code entry is skipped and a [KEY] is simply depressed in the above sequence,

the preprogrammed PLU Code of the KEY will be displayed.

2. If “0” is entered as PLU Code in the above sequence, the KEY will be closed. Pressing the

closed KEY in sale entry will cause an error.

PLU Preset-code Key Program Receipt Format:

Key Operation: Control Lock: SET

PLU Preset-code Key Setting

When there are any keys programmed as PLU Preset-code Keys on the ECR Keyboard, and/or when the

PLU Keyboard PK-2 (hardware option) is connected to the ECR, a PLU code may be preset to each of those

keys in this operation.

Condition: Any time outside a sale

Programming Procedure:

AT/TL

Repeatable for other keys.

PLU Code

Enter through Numeric

Keys on the ECR Keyboard

(Enter 0 to close the key)

@/FOR

Declaration of Program

No. 27 for PLU Preset-

code Key Setting

KEY

Location Code (left side);

refer to REMARKS 1 and

2 on the next page.

PLU Code assigned to

the key (right side)

Required

Key

TEC STORE

1343 PEACH DRIVE

PHONE: 87-6437

Open 8:00am to 7:00pm

Closed: every Wednesday

11-28-1997 #0

P27

#116 0500

0089 12:11TM

@/FOR

0 0 AT/TL

PLU Code