Gebruikershandleiding TECRA A8 / Satellite Pro A120
Copyright ©2006 by TOSHIBA Corporation. Alle rechten voorbehouden. Krachtens de auteurswetten mag deze handleiding op geen enkele wijze worden verveelvoudigd zonder voorafgaande schriftelijke toestemming van TOSHIBA. Met betrekking tot het gebruik van de informatie in deze handleiding wordt geen octrooirechtelijke aansprakelijkheid aanvaard.
InterVideo en WinDVD zijn gedeponeerde handelsmerken van InterVideo Inc. WinDVD Creator is een handelsmerk van InterVideo Inc. In deze handleiding wordt mogelijk verwezen naar andere handelsmerken en gedeponeerde handelsmerken die hierboven niet zijn genoemd.
Modemwaarschuwing Verklaring van overeenstemming De apparatuur is goedgekeurd (conform Commissiebesluit “CTR21”) voor aansluiting van één toestel op het PSTN (Public Switched Telephone Network: openbaar geschakeld telefoonnetwerk) in alle Europese landen. Als gevolg van variaties tussen de individuele PSTN’s in verschillende landen vormt deze goedkeuring niet per se een garantie voor storingsvrije werking op elke telefoonaansluiting. Wend u in het geval van problemen in eerste instantie tot uw leverancier.
Veiligheidsinstructies voor optische schijfstations Het optische schijfstation gebruikt een lasersysteem. Lees met het oog op een veilig en correct gebruik van dit product eerst deze gebruikershandleiding zorgvuldig door. Bewaar deze handleiding altijd in de nabijheid van het product, zodat u deze handleiding eenvoudig kunt naslaan. Als het apparaat ooit moet worden gerepareerd, neemt u contact op met een Authorized Toshiba Service Center.
vi Gebruikershandleiding
Inhoudsopgave Voorwoord Algemene voorzorgsmaatregelen Hoofdstuk 1 Inleiding Controlelijst van apparatuur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Voorzieningen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Speciale voorzieningen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12 Hulpprogramma’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15 Opties . . . . . . . . . . . . .
Hoofdstuk 4 Grondbeginselen Het touchpad gebruiken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1 Het USB-diskettestation gebruiken . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 Optische schijfstations gebruiken . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3 CD’s beschrijven met het DVD-ROM- & CD-R/RW-station . . . . . . . . .4-7 CD’s/DVD’s beschrijven met het DVD Super Multi-station . . . . . . . .4-10 Behandeling van schijven . . . . . . . . . . . . . .
Hoofdstuk 8 Optionele apparaten PC-kaart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 SD-kaart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Geheugenuitbreiding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Accu-eenheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Netadapter . . . . . . . . . . . . . . . . . . . . .
x Gebruikershandleiding
Voorwoord Gefeliciteerd met uw nieuwe TECRA A8 / Satellite Pro A120-computer. Deze krachtige, hoogpresterende notebook staat garant voor jarenlang betrouwbaar computergebruik en biedt uitstekende uitbreidingsmogelijkheden, bijvoorbeeld voor multimedia-apparaten. In deze handleiding wordt uitgelegd hoe u uw TECRA A8 / Satellite Pro A120-computer gebruiksklaar maakt en ermee aan de slag gaat.
Voorwoord Hoofdstuk 5, Het toetsenbord, beschrijft speciale toetsenbordfuncties zoals de geïntegreerde numerieke toetsen en de sneltoetsen. Hoofdstuk 6, Stroomvoorziening en spaarstanden, verschaft details over de voedingsbronnen en energiebesparingsmodi van de computer en laat zien hoe u een wachtwoord instelt. In hoofdstuk 7, HW Setup, wordt uitgelegd hoe u de computer configureert met het programma HW Setup en TPM. Hoofdstuk 8, Optionele apparaten, beschrijft welke optionele hardware beschikbaar is.
Voorwoord Gebruik van toetsen Voor sommige bewerkingen moet u tegelijkertijd twee of meer toetsen indrukken. Dergelijke bewerkingen worden aangeduid door een plusteken (+) tussen de toetsopschriften (+). Zo betekent Ctrl + C dat u op C moet drukken terwijl u Ctrl ingedrukt houdt. Als er drie toetsen worden gebruikt, houdt u de eerste twee ingedrukt en drukt u tegelijkertijd op de derde.
Voorwoord xiv Gebruikershandleiding
Algemene voorzorgsmaatregelen TOSHIBA-computers bieden optimale veiligheid en optimaal gebruikerscomfort; bovendien zijn ze robuust, een belangrijke eigenschap voor draagbare computers. U moet echter bepaalde voorzorgsmaatregelen nemen om het risico van lichamelijk letsel of beschadiging van de computer verder te beperken. Lees de onderstaande algemene aanwijzigen en let op de waarschuwingen die in de handleiding worden gegeven.
Algemene voorzorgsmaatregelen Verhitting van computeroppervlakken ■ Vermijd langdurig lichamelijk contact met de computer. Indien de computer gedurende een langere periode is gebruikt, kan het oppervlak zeer heet worden. Zelfs als de computer niet heet aanvoelt, kan langdurig lichamelijk contact (bijvoorbeeld wanneer u de computer op uw schoot of uw handen op de polssteun laat rusten) resulteren in rode plekken op de huid. ■ De metalen plaat die de I/O-poorten ondersteunt, kan heet worden.
Hoofdstuk 1 Inleiding Dit hoofdstuk bevat een controlelijst met de geleverde apparatuur en beschrijft de voorzieningen, opties en accessoires van de computer. Sommige voorzieningen die in deze handleiding worden toegelicht, functioneren wellicht niet correct als u een besturingssysteem gebruikt dat niet vooraf door TOSHIBA is geïnstalleerd. Controlelijst van apparatuur Verwijder de computer voorzichtig uit de verpakking. Berg de doos en het verpakkingsmateriaal op voor toekomstig gebruik.
Inleiding Software Microsoft® Windows XP ■ De volgende software is vooraf geïnstalleerd: Een asterisk * geeft aan dat bepaalde software op sommige modellen niet vooraf is geïnstalleerd.
Inleiding ■ ■ ■ ■ ■ TPM Software * RecordNow!Basic for TOSHIBA * DLA voor TOSHIBA * TOSHIBA DVD-RAM-stuurprogramma * WinDVD Creator 2 Platinium * Documentatie ■ Handleiding voor TECRA A8 / Satellite Pro A120 draagbare computer ■ TECRA A8 / Satellite Pro A120 Aan de slag ■ Instructiegids voor veiligheid en comfort ■ Garantie-informatie Productherstelmedia en extra software ■ Productherstelmedia ■ Extra software * Als een of meer items ontbreken of beschadigd zijn, neemt u onmiddellijk contact op met uw d
Inleiding Sommige modellen in deze serie zijn voorzien van de Intel® Centrino® Duo Mobile-technologie, die is gebaseerd op drie afzonderlijke technologieën: de Intel® Core™ Duo-processor, Intel® PRO/Wireless Network Connection en de Mobile Intel® 945 Express-chipsetfamilie.
Inleiding Voeding Accu-eenheid De computer wordt van stroom voorzien door één oplaadbare lithium-ion accu-eenheid. Wettelijke voetnoot (gebruiksduur van de accu)*3 Raadpleeg de paragraaf Wettelijke voetnoten in hoofdstuk 10 voor meer informatie over de wettelijke voetnoot met betrekking tot de gebruiksduur van de accu. Klik op de *3. RTC-batterij De computer heeft een interne batterij voor de interne RTC (Real Time Clock) en kalender.
Inleiding USB-diskettestation Dit station ondersteunt 3,5-inch diskettes met een capaciteit van 1,44 MB of 720 KB. Het station wordt aangesloten op een USB-poort. Optioneel of bij sommige modellen geleverd. Optisch station Computers in deze serie kunnen worden geconfigureerd met een optisch station. In de volgende tabel worden de beschikbare optische stations beschreven.
Inleiding DVD-ROM- & CD-R/RW-station Sommige modellen zijn uitgerust met een DVD-ROM- en CD-R/RW-stationsmodule van volledige grootte waarmee u CD’s/DVD’s zonder adapter kunt uitvoeren. De maximale leessnelheid is 8-speed voor DVD-ROM en 24-speed voor CD-ROM. De maximale schrijfsnelheid is 24-speed voor CD-R’s en 24-speed voor CD-RW’s. Dit station ondersteunt dezelfde indelingen als het DVD-ROM-station en daarnaast de volgende indelingen.
Inleiding Beeldscherm Het LCD-scherm van de computer ondersteunt videobeelden met hoge resolutie. Het LCD-scherm kan in diverse standen worden gezet voor maximaal comfort en optimale leesbaarheid. Ingebouwd 15,4-inch TFT-LCD-scherm, 16 miljoen kleuren, met een van de volgende resoluties: ■ WXGA, 1280 horizontale x 800 verticale pixels Wettelijke voetnoot (LCD)*5 Raadpleeg de paragraaf Wettelijke voetnoten in hoofdstuk 10 voor meer informatie over de wettelijke voetnoot met betrekking tot de LCD.
Inleiding Poorten Serieel RS-232C-compatibele poort (16550UART-compatibel). Niet alle modellen hebben een seriële poort. Externe monitor De analoge VGA-poort ondersteunt VESA DDC2B-compatibele functies. Universal Serial Bus (USB 2.0) De computer bevat drie Universal Serial Buspoorten die voldoen aan de USB 2.0-norm. Docking Deze poort ondersteunt verbinding met een optionele Advanced Port Replicator III Plus, zoals wordt beschreven in het gedeelte Opties. Niet alle modellen hebben een dockingpoort.
Inleiding Communicatie 1-10 Modem De ingebouwde modem voorziet in gegevens- en faxcommunicatie en ondersteunt de standaards V.90 (V.92). De snelheid van gegevens- en faxverzending is afhankelijk van de toestand van de analoge telefoonlijn. Het modem heeft een modempoort voor aansluiting op een telefoonlijn. In sommige verkoopgebieden wordt deze standaard in de fabriek geïnstalleerd. De standaards V.90 en V.
Inleiding Draadloos LAN De computers in deze serie zijn uitgerust met een draadloos LAN-kaart. Deze kaart is compatibel met andere LAN-systemen die zijn gebaseerd op DSSS-/OFDM-radiotechnologie (Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing) en die voldoen aan de IEEE 802.11-norm (Revisie A, B of G). ■ Theoretische maximumsnelheid: 54 Mbps (IEEE802.11a, 802.11g) ■ Theoretische maximumsnelheid: 11 Mbps (IEEE802.
Inleiding Schakelaar voor draadloze communicatie Met deze schakelaar zet u de Wireless LAN- en Bluetooth-functies aan en uit. Alle modellen zijn voorzien van een schakelaar voor draadloze communicatie. Sommige modellen zijn voorzien van functies voor draadloos LAN en Bluetooth. Beveiliging Beveiligingsslotsleuf Hiermee kan de computer door middel van een beveiligingsslot aan een bureau of ander groot voorwerp worden verankerd.
Inleiding Vaste schijf automatisch uitschakelen Met deze functie wordt de stroom naar de vaste schijf automatisch stopgezet als een bepaalde tijd lang geen vaste-schijfactiviteit heeft plaatsgevonden. De stroomvoorziening wordt hersteld zodra de vaste schijf wordt gebruikt. U kunt de tijdlimiet opgeven met de optie Vaste schijf uit in het tabblad Basisinstellingen van TOSHIBA Power Saver.
Inleiding In-/uitschakelen via LCD Met deze functie wordt de stroom naar de computer uitgeschakeld wanneer het LCDscherm wordt gesloten en weer ingeschakeld zodra het LCD-scherm wordt geopend. U kunt de instelling opgeven met de optie Als ik het scherm sluit in het tabblad Acties instellen van TOSHIBA Power Saver.
Inleiding Stand-by Als u uw werk moet onderbreken, kunt u de computer uitschakelen zonder de software te hoeven sluiten: de gegevens worden in het hoofdgeheugen van de computer bewaard. Wanneer u de computer weer aanzet, kunt u uw werk hervatten op de plaats waar u was opgehouden. Hulpprogramma’s In dit gedeelte worden vooraf geïnstalleerde hulpprogramma’s beschreven en wordt toegelicht hoe u de programma’s start.
Inleiding DVD-videospeler De DVD-videospeler heeft een scherminterface en -functies voor het afspelen van DVD-video’s. De speler heeft een scherminterface en -functies. Klik op Start, wijs Alle programma’s en InterVideo WinDVD aan en klik op InterVideo WinDVD. Bluetooth-stack voor Windows van Toshiba Door middel van deze software kunnen externe Bluetooth-apparaten draadloos met elkaar communiceren. Bluetooth kan niet worden gebruikt in modellen waarin geen Bluetoothmodule is geïnstalleerd.
Inleiding TOSHIBA PCdiagnoseprogramma TOSHIBA PC-diagnoseprogramma toont gegevens over de configuratie van de computer en biedt de mogelijkheid de functionaliteit van bepaalde ingebouwde apparaten te testen. U start het TOSHIBA PC-diagnoseprogramma door te klikken op Start. Wijs vervolgens Alle programma’s, TOSHIBA en Hulpprogramma’s aan en klik op PC-diagnoseprogramma. TOSHIBA Mobiel Extra Niet alle modellen hebben TOSHIBA Mobile Extension.
Inleiding TOSHIBAsneltoetsprogramma voor beeldschermen Met dit hulpprogramma kunt u een ander beeldscherm kiezen en de beeldschermresolutie wijzigen. Met Fn + F5 wijzigt u het actieve beeldscherm. Druk op Fn + spatiebalk om de resolutie te wijzigen. TOSHIBA SDgeheugenkaart formatteren Als u het hulpprogramma wilt openen, klikt u op Start, wijst u achtereenvolgens Alle programma’s, TOSHIBA en Hulpprogramma’s aan en klikt u op TOSHIBA SD Memory Card Format.
Inleiding Beveiligingsslot U kunt een beveiligingskabel aan de computer bevestigen om de computer te beschermen tegen diefstal. USB-diskettestation Het USB-diskettestation ondersteunt 3,5-inch diskettes met een capaciteit van 1,44 MB of 720 KB en wordt aangesloten op een USB-poort. In Windows XP kunt u diskettes van 720 KB niet formatteren, maar u kunt wel eerder geformatteerde diskettes gebruiken.
Inleiding 1-20 Gebruikershandleiding
Hoofdstuk 2 Rondleiding In dit hoofdstuk worden de verschillende onderdelen van de computer geïdentificeerd. Maak uzelf vertrouwd met elk onderdeel voordat u met de computer aan de slag gaat. Wettelijke voetnoot (niet-toepasselijke pictogrammen)*8 Raadpleeg de paragraaf Wettelijke voetnoten in hoofdstuk 10 voor meer informatie over de wettelijke voetnoot met betrekking tot niet-toepasselijke pictogrammen. Klik op de *8.
Rondleiding Schakelaar voor draadloze communicatie Schuif deze schakelaar naar links om de functies voor draadloos LAN en Bluetooth uit te schakelen. Schuif de schakelaar naar rechts om deze functies in te schakelen. Alle modellen beschikken over een schakelaar voor draadloze communicatie, hoewel slechts sommige modellen zijn voorzien van functies voor zowel draadloos LAN als Bluetooth.
Rondleiding Linkerkant Afbeelding 2-2 geeft de linkerkant van de computer weer. SD-kaartsleuf Sleuf voor PC-kaart Luchtopeningen Uitwerpknop voor de PC-kaart Afbeelding 2-2 De linkerkant van de computer Luchtopeningen De luchtopeningen dienen om de CPU te beschermen tegen oververhitting. U mag de luchtopeningen niet blokkeren. Zorg ervoor dat er nooit metalen voorwerpen, zoals schroeven, nietjes en paperclips in de pc of het toetsenbord terechtkomen.
Rondleiding Rechterkant Afbeelding 2-3 geeft de rechterkant van de computer weer. Optisch station Beveiligingsslotsleuf Afbeelding 2-3 De rechterkant van de computer Beveiligingsslotsleuf Aan deze sleuf kan een beveiligingskabel worden bevestigd. De optionele beveiligingskabel verankert de computer aan een bureau of ander groot voorwerp ter bescherming tegen diefstal. Optisch station Er is een CD-ROM-, DVD-ROM-, DVD-ROM- en CD-R/RW-station of een DVD Super Multi geïnstalleerd.
Rondleiding Niet alle modellen hebben een video out-aansluiting. Poort voor externe monitor Op deze poort kunt u een extern beeldscherm aansluiten. Gelijkstroomingang (15 V) Hierop wordt de netadapter aangesloten. Gebruik alleen het model netadapter dat bij de computer is geleverd. Gebruik van de verkeerde adapter kan resulteren in beschadiging van de computer. Modempoort U kunt de modemaansluiting gebruiken om het modem rechtstreeks via een modemkabel aan te sluiten op een telefoonlijn.
Rondleiding ■ Op de LAN-poort mogen alleen LAN-kabels worden aangesloten. Als u dit doet, kunnen schade of storingen optreden. ■ Koppel de LAN-kabel niet aan een voedingsbron. Als u dit doet, kunnen schade of storingen optreden. Aansluitingslampje (groen) Dit lampje brandt groen wanneer de computer op een LAN is aangesloten en het LAN correct functioneert. LAN-actief-lampje (oranje) Dit lampje brandt oranje tijdens gegevensoverdracht tussen de computer en het LAN. i.
Rondleiding Onderkant Afbeelding 2-5 illustreert de onderkant van de computer. Zorg dat het beeldscherm gesloten is voordat u de computer ondersteboven zet. Geheugenafdekplaatje module Inkepingen Dockingpoort Accu-eenheid Klepje over vasteschijfeenheid Ontgrendelingsschuif accuhouder Accuvergrendeling Afbeelding 2-5 De onderkant van de computer Accuvergrendeling Duw de accuvergrendeling opzij, zodat u de accu-eenheid kunt verwijderen.
Rondleiding Niet alle modellen hebben een dockingpoort. ■ Alleen de Advanced Port Replicator III kan met deze computer worden gebruikt. Probeer niet een andere Port Replicator te gebruiken. ■ Zorg dat er geen voorwerpen in de dockingpoort terechtkomen. Een speld of soortgelijk voorwerp kan de schakelingen van de computer beschadigen. Een plastic klepje beveiligt de aansluiting. Geheugenafdekplaatje Deze behuizing beschermt de sleuven waarin module geheugenmodules kunnen worden geplaatst.
Rondleiding Voorkant met geopend beeldscherm Deze paragraaf beschrijft de computer met geopend LCD-scherm. Raadpleeg de desbetreffende illustratie voor details. U opent het LCD-beeldscherm door de vergrendelingsschuif op de voorkant van het LCD-scherm opzij te schuiven en het scherm omhoog te kantelen. Zet het LCD-scherm in een stand waar u er goed zicht op hebt.
Rondleiding 2-10 LCD-scherm Het LCD-scherm toont contrastrijke tekst en afbeeldingen. U kunt de resolutie instellen op waarden tussen 800 × 600 en 1.280 × 800 pixel. Raadpleeg de paragraaf Beeldschermcontroller en videomodi in bijlage B. Als de computer door de accu wordt gevoed, ziet het LCD-scherm er niet zo helder uit als bij gebruik van de netadapter. Het lagere helderheidsniveau dient om accu-energie te besparen.
Rondleiding TOSHIBA Assistknop Druk op deze knop om het programma te starten. De standaardtoepassing is TOSHIBA Assist. Als de computer stand-by is, in de slaapstand staat of is uitgeschakeld, drukt u op deze knop om de computer in te schakelen en het programma te starten. U kunt een functie voor de TOSHIBA Assist-knop instellen in de eigenschappen van TOSHIBA Controls. Niet alle modellen hebben een TOSHIBA Assistknop. Aan/uit-knop Druk op de aan/uit-knop om de computer in en uit te schakelen.
Rondleiding Systeemlampjes De lampjes links van de pictogrammen gaan branden wanneer diverse computerbewerkingen worden uitgevoerd. Figuur 2-7 Systeemlichtjes 2-12 SD-kaart Wanneer de computer toegang heeft tot de SD-kaart sleuf, brandt dit lampje groen. DC IN Het DC IN-lampje brandt groen als via de netadapter gelijkstroom (DC) wordt geleverd. Als er problemen zijn met de uitgangsspanning van de adapter of met de stroomvoorziening, knippert dit lampje oranje.
Rondleiding Toetsenbordlampjes In de volgende afbeeldingen ziet u waar de lampjes van de geïntegreerde numerieke toetsen en het Caps Lock-lampje zich bevinden. Als het lampje van de cursormodus brandt, kunt u de geïntegreerde numerieke toetsen als cursortoetsen gebruiken. Brandt het lampje van de numerieke modus, dan kunt u de geïntegreerde numerieke toetsen gebruiken om cijfers in te voeren. Als het Caps Lock-lampje brandt, is de functie voor hoofdlettervergrendeling ingeschakeld.
Rondleiding Numerieke modus Als het lampje van de numerieke modus groen brandt, kunt u de geïntegreerde numerieke toetsen (de toetsen met de grijze opschriften) gebruiken om cijfers in te voeren. Raadpleeg de paragraaf Geïntegreerde numerieke toetsen in hoofdstuk 5, Het toetsenbord. USB-diskettestation Het USB-diskettestation ondersteunt diskettes van 1,44 MB en 720 KB en wordt aangesloten op de USB-poort. Dit station wordt standaard meegeleverd bij sommige modellen en is optioneel bij andere.
Rondleiding ■ Gebruik het USB-diskettestation op een plat, horizontaal oppervlak. Plaats het station tijdens gebruik niet op een vlak dat meer dan 20° helt. ■ Plaats geen voorwerpen op het diskettestation. optische stations De computer is uitgerust met een van de volgende optische schijfstations: CD-ROM-, DVD-ROM-, DVD-ROM&CD-R/RW- en DVD Super Multistations. Voor het aansturen van CD-/DVD-ROM’s wordt een ATAPI-interfacecontroller gebruikt.
Rondleiding CD’s ■ Beschrijfbare CD’s (CD-R’s) kunnen slechts één keer worden beschreven. De opgenomen gegevens kunnen niet worden gewist of veranderd. ■ CD-RW-schijven, zoals multispeed CD-RW’s, high-speed CD-RW’s en ultra-speed CD-RW’s kunnen meer dan één keer worden beschreven. DVD’s ■ DVD-R’s, DVD+R’s, DVD-R DL- en DVD+R DL-schijven kunnen slechts één keer worden beschreven. De opgenomen gegevens kunnen niet worden gewist of veranderd.
Rondleiding DVD-ROM- & CD-R/RW-station In de DVD-ROM- & CD-R/RW-stationsmodule van volledige grootte kunt u zonder adapter gegevens op herschrijfbare CD’s vastleggen en CD’s/ DVD’s van 12 cm (4,72 inch) of 8 cm (3,15 inch) lezen. In het midden van een schijf is de leessnelheid lager dan aan de rand.
Rondleiding Netadapter De netadapter kan zich automatisch aanpassen aan elke spanning tussen 100 en 240 volt en aan een frequentie van 50 of 60 hertz, waardoor u de computer in praktisch elk land of gebied kunt gebruiken. De netadapter zet wisselstroom om in gelijkstroom en reduceert de spanning die aan de computer wordt geleverd. Om de accu op te laden sluit u de netadapter eenvoudig aan op een voedingsbron en op de computer. Zie hoofdstuk 6, Stroomvoorziening en spaarstanden voor meer informatie.
Rondleiding Gebruik altijd de TOSHIBA-netadapter die met de pc is meegeleverd en de TOSHIBA-accu-oplader (die mogelijk met de pc is meegeleverd), of gebruik een netadapter of oplader van een ander model dat door TOSHIBA is goedgekeurd om het risico van brand of andere schade aan de pc te vermijden. Het gebruik van een incompatibele netadapter of accuoplader kan leiden tot brand of schade aan de pc, mogelijk met ernstig letsel tot gevolg.
Rondleiding 2-20 Gebruikershandleiding
Hoofdstuk 3 Voor u begint Dit hoofdstuk verschaft basisinformatie aan de hand waarvan u met uw computer aan de slag kunt. De volgende onderwerpen worden behandeld: ■ De netadapter aansluiten ■ Het beeldscherm openen ■ De computer inschakelen ■ Voor het eerst opstarten ■ De computer uitschakelen ■ Computer opnieuw opstarten ■ Herstelmedia maken ■ De vooraf geïnstalleerde software herstellen vanaf de vaste schijf.
Voor u begint Andere aandachtspunten ■ Gebruik een programma voor viruscontrole en zorg ervoor dat dit regelmatig wordt bijgewerkt. ■ Formatteer nooit opslagmedia zonder eerst de inhoud hiervan te controleren. Bij formattering worden alle opgeslagen gegevens verwijderd. ■ Het is verstandig om af en toe een back-up te maken van de interne vaste schijf of van een ander primair opslagapparaat op externe media.
Voor u begint ■ Gebruik altijd de Toshiba-netadapter die met de pc is meegeleverd en de Toshiba-accuoplader (die mogelijk met de pc is meegeleverd), of gebruik een ander model dat door Toshiba is goedgekeurd om het risico van brand of andere schade aan de pc te vermijden. Het gebruik van een incompatibele netadapter of accuoplader kan leiden tot brand of schade aan de pc, mogelijk met ernstig letsel tot gevolg.
Voor u begint 1. Sluit het netsnoer op de netadapter aan. Afbeelding 3-2 Het netsnoer op de netadapter aansluiten (2-pins stekker) Afbeelding 3-3 Het netsnoer op de netadapter aansluiten (3-pins stekker) Afhankelijk van het model kan de kabel een 2-pins of 3-pins stekker bevatten. 2. Koppel de gelijkstroomuitgangsstekker van de netadapter aan de gelijkstroomingang (DC IN 15V) op de achterkant van de computer.
Voor u begint Het beeldscherm openen Het LCD-scherm kan in een aantal standen worden geopend voor optimaal kijkgemak. 1. Schuif de schermvergrendeling op de voorkant van de computer opzij om het beeldscherm te ontgrendelen. 2. Houd de polssteun met één hand naar beneden, zodat het hoofdgedeelte niet wordt opgetild. Til het scherm nu langzaam omhoog. Pas de hoek van het scherm aan voor een optimale helderheid. Wees voorzichtig bij het openen en sluiten van het LCD-scherm.
Voor u begint 1. Open het LCD-scherm van de computer. 2. Houd de aan/uit-knop van de computer twee à drie seconden ingedrukt. Aan/uit-knop Afbeelding 3-6 De computer inschakelen Voor het eerst opstarten Wanneer u de computer voor het eerst inschakelt, verschijnt het opstartscherm van Microsoft Windows XP. Volg de aanwijzingen op elk scherm. Tijdens de configuratie kunt u op de knop Terug klikken om terug te keren naar het vorige scherm.
Voor u begint ■ Zorg dat de vaste schijf uit staat. Als u de computer uitzet terwijl er nog schijfactiviteit plaatsvindt, loopt u het risico dat gegevens verloren gaan of de schijf beschadigd raakt. ■ Schakel nooit de stroom uit terwijl een toepassing actief is Dit zou tot gegevensverlies kunnen leiden. ■ Schakel nooit de stroom uit, koppel nooit een extern opslagapparaat los en verwijder nooit opslagmedia tijdens het lezen/schrijven van gegevens. Als u dat wel doet, kan dit tot gegevensverlies leiden. 3.
Voor u begint ■ Vergeet niet uw gegevens op te slaan alvorens de computer op stand-by te zetten. ■ Wanneer de computer in de stand-by-modus staat, dient u geen geheugenmodule te installeren of te verwijderen. Doet u dit toch, dan bestaat het risico dat de computer of de module schade oploopt. ■ Verwijder de accu-eenheid niet terwijl de computer in de stand-bymodus is (tenzij de computer op een stopcontact is aangesloten). Doet u dit toch, dan gaan de gegevens in het geheugen verloren.
Voor u begint Beperkingen van de stand-by-modus In de volgende omstandigheden werkt Stand-by niet: ■ De computer wordt onmiddellijk na het afsluitproces weer aangezet. ■ Geheugenschakelingen zijn blootgesteld aan statische elektriciteit of elektrische ruis. Slaapstand De slaapstand zorgt ervoor dat de inhoud van het geheugen wordt opgeslagen wanneer de computer wordt uitgeschakeld. De volgende keer dat de computer wordt aangezet, wordt de vorige toestand hersteld.
Voor u begint Slaapstand activeren U kunt de slaapstand ook activeren door op Fn + F4 te drukken. Raadpleeg hoofdstuk 5, Het toetsenbord voor meer informatie. Voer de volgende stappen uit om de slaapstand in te schakelen: 1. Klik op Start. 2. Selecteer Computer uitschakelen. 3. Open het dialoogvenster Computer uitschakelen. 4. Klik op Slaapstand. Automatische slaapstand Wanneer u op de aan/uit-knop drukt of het beeldscherm sluit, wordt de computer automatisch in de slaapstand gezet.
Voor u begint Computer opnieuw opstarten In bepaalde gevallen dient u het systeem opnieuw op te starten. Bijvoorbeeld: ■ als u bepaalde computerinstellingen hebt gewijzigd; ■ als er een fout optreedt en de computer niet reageert op toetsenbordopdrachten. ■ Er zijn drie manieren om de computer opnieuw in te stellen: 1. Klik op Start en vervolgens op Computer uitschakelen. Klik in het venster Computer uitschakelen op Opnieuw starten. 2.
Voor u begint TOSHIBA-hulpprogramma’s en -stuurprogramma’s herstellen Als Windows naar behoren werkt, kunnen stuurprogramma’s of toepassingen afzonderlijk worden hersteld. De map C:\TOOLSCD bevat de stuurprogramma’s en toepassingen van uw computer. Als systeemstuurprogramma’s of -toepassingen op een of andere manier zijn beschadigd, kunt u de meeste van deze componenten opnieuw installeren vanuit deze map. Maak voor het gemak een kopie van deze map op een extern medium.
Hoofdstuk 4 Grondbeginselen In dit hoofdstuk worden de grondbeginselen van computergebruik beschreven en wordt toegelicht welke voorzorgsmaatregelen u dient te treffen. Verder leest u hier hoe u met CD’s en DVD’s omgaat. Het touchpad gebruiken Als u het touchpad wilt gebruiken, dient u uw vingertop op het touchpad te plaatsen en deze in de richting te bewegen waarin u de schermaanwijzer wilt verplaatsen.
Grondbeginselen U kunt de functies die doorgaans met de linkerknop worden uitgevoerd, ook activeren door zachtjes op het touchpad te tikken. Klikken: één keer tikken Dubbelklikken: Tik het touchpad tweemaal aan. Slepen en neerzetten: Tik om het te verplaatsen materiaal te selecteren. Laat uw vinger na de tweede tik op het touchpad en verplaats het materiaal. Het USB-diskettestation gebruiken Het USB-diskettestation ondersteunt diskettes van 1,44 MB en 720 KB en wordt aangesloten op de USB-poort.
Grondbeginselen Het USB-diskettestation ontkoppelen Voer na gebruik van het USB-diskettestation de volgende stappen uit om het station te ontkoppelen: 1. Wacht tot het lampje uitgaat en u zeker weet dat er geen disketteactiviteit meer plaatsvindt. Als u het USB-diskettestation ontkoppelt of de stroom uitschakelt terwijl de computer het station gebruikt, loopt u het risico dat gegevens verloren gaan of dat de diskette of het station beschadigd raakt. 2.
Grondbeginselen Schijven laden Als u een CD/DVD wilt laden, voert u de volgende stappen uit en raadpleegt u afbeelding 4-4 tot en met 4-7. 1. Terwijl de computer is ingeschakeld, drukt u op de uitwerpknop om de stationslade een stukje te openen. Uitwerpknop Afbeelding 4-4 De uitwerpknop indrukken 2. Trek de schijflade voorzichtig uit totdat deze volledig is geopend.
Grondbeginselen 3. Leg de CD/DVD met het opschrift omhoog in de schijflade. Laserlens Afbeelding 4-6 Een CD/DVD inbrengen Wanneer de schijflade volledig is uitgeschoven, steekt de rand van de computer iets uit over de CD-/DVD-lade. Wanneer u de CD/DVD in de lade plaatst, moet u de schijf dus schuin houden. Zorg na het plaatsen van de CD/DVD echter dat de schijf plat ligt (zie afbeelding 4-5). ■ Raak de laserlens en de omtrek ervan niet aan. Hierdoor kunt u de uitlijning van de toetsen verstoren.
Grondbeginselen 5. Duw zachtjes tegen het midden van de schijflade om deze te sluiten. Duw zachtjes tot de lade vastklikt. Als de CD/DVD niet goed zit wanneer de schijflade gesloten is, bestaat het risico dat de schijf beschadigd raakt. Bovendien kan het dan gebeuren dat de schijflade niet volledig wordt geopend wanneer u op de uitwerpknop drukt. Abeelding 4-7 De CD/DVD-lade sluiten Schijven verwijderen Als u de CD/DVD wilt verwijderen, voert u de volgende stappen uit en raadpleegt u afbeelding 4-10.
Grondbeginselen 3. Duw zachtjes tegen het midden van de schijflade om deze te sluiten. Duw zachtjes tot de lade vastklikt. Een CD/DVD verwijderen wanneer de schijflade niet opengaat U kunt de lade niet met de uitwerpknop openen wanneer de computer is uitgeschakeld. In dat geval kunt u de schijflade openen door een dun voorwerp (van ongeveer 15 mm lang), zoals een rechtgebogen paperclip, in het uitwerpgaatje rechts van de uitwerpknop te steken.
Grondbeginselen Als u media beschrijft met behulp van een optisch station, moet u de netadapter altijd aansluiten op een stopcontact of voedingsbron om zo te zorgen voor maximale prestaties. Als gegevens worden weggeschreven bij accuvoeding, kan het wegschrijven soms mislukken omdat de accu bijna leeg is. Dit kan resulteren in gegevensverlies. Vóór schrijven of herschrijven Neem de volgende voorzorgsmaatregelen in acht bij het schrijven en herschrijven van gegevens.
Grondbeginselen ■ Schrijf vanaf de vaste schijf van de computer naar de CD. Probeer niet te schrijven vanaf gedeelde apparaten zoals een LAN-server of andere netwerkapparaten. ■ Voor het beschrijven van schijven wordt uitsluitend Sonic RecordNow! aanbevolen. De werking in combinatie met andere software kan derhalve niet worden gegarandeerd. Tijdens schrijven of herschrijven Houd u aan de volgende richtlijnen/voorschriften bij het schrijven van gegevens naar een CD-R of CD-RW.
Grondbeginselen CD’s/DVD’s beschrijven met het DVD Super Multistation Met het DVD Super Multi-station kunt u gegevens schrijven naar CD-R-/RW-schijven en naar DVD-R/-R DL/-RW/+R/+R DL/+RW/-RAMschijven. De volgende schrijftoepassingen zijn vooraf geïnstalleerd. RecordNow! en DLA onder licentie van Sonic Solutions en InterVideo’s WinDVD Creator Platinum. ■ Raadpleeg de paragraaf Beschrijfbare schijven in hoofdstuk 2 voor informatie over de verschillende soorten beschrijfbare CD’s/DVD’s.
Grondbeginselen Vóór schrijven of herschrijven ■ Op grond van TOSHIBA’s beperkte compatibiliteitstests worden de volgende fabrikanten van CD-R-/RW-schijven of DVD-R/-R DL/-RW/+R/+R DL/+RW/-RAM-schijven aanbevolen. TOSHIBA staat echter niet in voor de werking, kwaliteit of prestaties van enigerlei schijven. De schijfkwaliteit kan het schrijf- of herschrijfproces beïnvloeden. CD-R: TAIYO YUDEN CO., LTD. MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd.
Grondbeginselen DVD+RW: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. DVD-RAM: DVD-specificaties voor DVD-RAM voor versie 2.0, versie 2.1 of versie 2.2 Hitachi Maxell Ltd. Dit station is niet geschikt voor schijven die schrijfsnelheden van 16-speed of hoger (DVD-R, DVD+R), 4-speed (DVD-RW, DVD+RW), 5-speed (DVD-RAM), 4-speed (DVD-R DL) en 8-speed (DVD+R DL) ondersteunen. ■ Controleer of de schijf van goede kwaliteit, schoon en onbeschadigd is.
Grondbeginselen ■ De schijf functioneert volgens de DVD-norm en wordt mogelijk opgevuld met dummygegevens als er gegevens naar worden geschreven die minder dan 1 GB in beslag nemen. Zelfs als u een kleine hoeveelheid gegevens schrijft, kan het even duren om de schijf met dummygegevens te vullen. ■ Een DVD-RAM die met FAT32 is geformatteerd, kan onder Windows 2000 alleen met een DVD-RAM-stuurprogramma worden gelezen.
Grondbeginselen ■ ■ ■ ■ ■ ■ het installeren, verwijderen of aansluiten van externe apparaten zoals: PC-kaart, SD-kaart, USB-apparaten, extern beeldscherm, i.LINK-apparaten, optische digitale apparaten. ■ muziek of spraak reproduceren via de audio-/ videobedieningsknoppen; ■ het openen van het optische station. Gebruik tijdens het (her)schrijven niet de afsluit-/afmeldprocedure en de stand-by-modus/slaapstand.
Grondbeginselen ■ RecordNow! kan niet in pakketindeling opnemen. ■ Met de functie “Exacte kopie” van RecordNow! kunt u wellicht geen back-up maken van een DVD-R/-R DL/-RW of DVD+R/+R DL/+RW die met andere software op een andere DVD-R/-R DL/-RW- of DVD+R/+R DL/+RW-recorder is gemaakt. ■ Als u gegevens toevoegt aan een DVD-R/-R DL of DVD+R/+R DL waarop reeds gegevens zijn opgenomen, kunnen de toegevoegde gegevens in bepaalde omstandigheden niet worden gelezen.
Grondbeginselen DLA voor TOSHIBA Wanneer u DLA gebruikt, dient u rekening te houden met de volgende beperkingen: ■ Deze software ondersteunt uitsluitend herschrijfbare schijven (DVD+RW, DVD-RW en CD-RW). Niet-herschrijfbare schijven zoals DVD+R/+R DL, DVD-R/-R DL en CD-R worden niet ondersteund. ■ Het formatteren en beschrijven van DVD-RAM-schijven wordt niet ondersteund door DLA. Deze functies worden uitgevoerd door het DVD-RAM-stuurprogramma.
Grondbeginselen Een DVD-video maken Vereenvoudigde stappen om een DVD-video te maken van videogegevens die zijn vastgelegd met een DV-camera: 1. Klik op Start -> Alle programma’s -> InterVideo WinDVD Creator2 -> InterVideo WinDVD Creator om WinDVD Creator te starten. 2. Klik op de knop Capture en leg de videogegevens van de DV-camera vast via IEEE1394. 3. Klik op de knop Edit en sleep de videoclips van het tabblad Video Library naar het montagespoor. 4. Klik op de knop Make Movie op de bovenste balk. 5.
Grondbeginselen ■ Als u opneemt naar een DV-camera, laat de camera dan gedurende enkele seconden opnemen voor u de daadwerkelijke gegevens opneemt om ervoor te zorgen dat alle gegevens worden vastgelegd. ■ Deze versie ondersteunt geen CD-recorder-, JPEG-, DVD-audio-, mini-DVD- en video-CD-functies. ■ Sluit alle andere programma’s terwijl u video opneemt op DVD of videoband. ■ Voer geen programma’s uit die de CPU belasten, zoals een schermbeveiliging.
Grondbeginselen 3. Over Disc Manager ■ WinDVD Creator kan één afspeellijst op een schijf bewerken. ■ In WinDVD Creator wordt mogelijk een andere miniatuur weergegeven dan u oorspronkelijk op de CE (consumentenelektronica) DVD-RAM-recorder hebt ingesteld. ■ Met Disc Manager kunt u gegevens in de volgende indelingen bewerken: DVD-VR op DVD-RAM, DVD+VR op DVD+RW en DVD-video op DVD-RW. 4.
Grondbeginselen Diskettes 1. Bewaar diskettes in hun originele houders om ze te beschermen en schoon te houden. Maak een vuile diskette schoon met een zachte doek die is bevochtigd met water. Gebruik geen schoonmaakmiddelen. 2. Open nooit de afsluitklep en raak het magnetische oppervlak van uw diskette niet aan. Hierdoor kan de diskette permanent beschadigd raken en kunnen er gegevens verloren gaan. 3. Ga altijd voorzichtig om met diskettes om te voorkomen dat opgeslagen gegevens verloren gaan.
Grondbeginselen Microfoonvolume Voer de volgende stappen uit om de microfoonversterking te wijzigen: 1. Klik op Start, wijs achtereenvolgens Alle programma’s, Bureauaccessoires en Entertainment aan en klik op Volumeregeling. 2. Klik op Opties en wijs Eigenschappen aan. 3. Selecteer Microfoonvolume en klik op OK. 4. Klik op Opties en selecteer Geavanceerde volumeregelingen. 5. Klik op Geavanceerd. 6. Schakel het selectievakje Microfoonversterking in.
Grondbeginselen Als in het hulpprogramma Modeminstallatie van het Configuratiescherm een functie voor regio-/landselectie beschikbaar is, dient u deze niet te gebruiken. Als u het land/de regio in het Configuratiescherm wijzigt, wordt deze wijziging mogelijk niet doorgevoerd. 2. Het pictogram Regioselectie wordt weergegeven in de Windowstaakbalk. 3. Klik met de primaire knop op het pictogram om een lijst van ondersteunde regio’s weer te geven. U ziet tevens een submenu met telefoonlocatie-informatie.
Grondbeginselen Keuze-opties Als u deze optie selecteert, worden de keuze-opties weergegeven. Als u de computer in Japan gebruikt, bent u wettelijk verplicht Japan als regio te selecteren. Het is in strijd met de wet om de modem in Japan met een andere regioselectie te gebruiken. Aansluiten Voer de volgende stappen uit om de modemkabel aan te sluiten. Voor het aansluiten van de modem moet u de modemkabel gebruiken die bij de computer wordt geleverd. Koppel het kabeluiteinde met de kern aan de computer.
Grondbeginselen U dient niet aan de kabel te trekken of de computer te verplaatsen terwijl de kabel is aangesloten. Als u gebruik maakt van een opslagapparaat (bijvoorbeeld een optisch station of een vaste schijf) dat aan een 16-bits PC-kaart is gekoppeld, kunt u te maken krijgen met de volgende modemproblemen: ■ de modemsnelheid is laag of de communicatie wordt onderbroken; ■ geluidsstoringen. Ontkoppelen Voer de volgende stappen uit om de interne modemkabel los te koppelen. 1.
Grondbeginselen Installeer of verwijder geen optionele geheugenmodule zolang Activering op draadloos LAN is ingeschakeld. ■ De functie Activering op LAN gebruikt stroom, zelfs als het systeem uitstaat. Laat de netadapter aangesloten als u deze functie gebruikt. ■ De hierboven weergegeven waarden zijn de theoretische maxima voor draadloze LAN-normen. De feitelijke waarden kunnen anders zijn.
Grondbeginselen Radioverbindingen U kunt gemakkelijk verbindingen tussen twee of meer apparaten tot stand brengen. De verbinding wordt gehandhaafd zelfs als een apparaat buiten het gezichtsveld ligt. Beveiliging Twee geavanceerde beveiligingsmechanismen zorgen voor optimale beveiliging: ■ Verificatie voorkomt dat onbevoegden toegang tot kritieke gegevens krijgen en maakt het onmogelijk de oorsprong van een bericht te vervalsen.
Grondbeginselen Productondersteuning: De laatste informatie over de ondersteuning van besturingssystemen, taalondersteuning of beschikbare upgrades vindt u op onze website in Europa (http://www.toshiba-europe.com/computers/tnt/bluetooth.htm) of de Verenigde Staten (www.pcsupport.toshiba.com). Schakelaar voor draadloze communicatie U kunt de draadloze LAN- en Bluetooth-functie in- of uitschakelen met de draadloze-communicatieschakelaar.
Grondbeginselen LAN De computer heeft ingebouwde ondersteuning voor Ethernet LAN (10 megabits per seconde, 10BASE-T), Fast Ethernet LAN (100 megabits per seconde, 100BASE-TX) en Gigabit Ethernet LAN (1000 megabits per seconde, 1000BASE-T (alleen voor modellen met een Intel® Core™ Duo/ Solo-processor)). In dit gedeelte wordt beschreven hoe u de verbinding van de computer met een LAN instelt of verbreekt. Installeer of verwijder geen optionele geheugenmodule zolang Activering op LAN is ingeschakeld.
Grondbeginselen De LAN-kabel aansluiten Voer de volgende stappen uit om de LAN-kabel aan te sluiten. ■ Sluit de netadapter aan alvorens de LAN-kabel aan te sluiten. Tijdens LAN-gebruik moet de netadapter aangesloten blijven. Als u de netadapter ontkoppelt terwijl de computer gegevens uitwisselt met een LAN, wordt de verbinding wellicht verbroken. ■ Sluit uitsluitend LAN-kabels aan op de LAN-poort. Als u dit doet, kunnen schade of storingen optreden.
Grondbeginselen De computer schoonmaken Om een lange levensduur en storingsvrij gebruik te waarborgen dient u de computer stofvrij te houden en voorzichtig te zijn met vloeistoffen in de buurt van de computer. ■ Mors geen vloeistoffen in de computer. Als de computer toch nat wordt, schakelt u onmiddellijk de stroom uit; laat de computer volledig drogen voordat u hem weer aanzet. ■ Reinig de computer met een licht (met water) bevochtigde doek. Voor het LCD-scherm kunt u een glasreinigingsmiddel gebruiken.
Grondbeginselen ■ Vervoer de computer nooit terwijl PC-kaarten zijn geïnstalleerd. Dit kan tot schade aan computer en/of PC-kaart leiden, waardoor het product niet meer werkt. ■ Gebruik een draagtas wanneer u de computer vervoert. ■ Houd de computer stevig vast wanneer u ermee rondloopt, om stoten en vallen te vermijden. ■ Houd de computer tijdens het dragen niet aan uitstekende delen vast.
Grondbeginselen Eigenschappen voor TOSHIBA-vasteschijfbeveiliging U kunt de vasteschijfbeveiliging instellen in het venster Eigenschappen voor TOSHIBA-vasteschijfbeveiliging. U opent dit venster door te klikken op Start, achtereenvolgens Alle programma’s, TOSHIBA en Hulpprogramma’s aan te wijzen en te klikken op Vasteschijfbeveiliging instellen. U kunt dit venster ook openen via het pictogram of de taakbalk of via Configuratiescherm.
Grondbeginselen Details U opent het venster Details door te klikken op de knop Details instellen in het venster Eigenschappen voor TOSHIBA-vasteschijfbeveiliging. Afbeelding 4-14 Details Verhoging van het detectieniveau Als de netadapter niet is aangesloten of het scherm is gesloten, gaat de vasteschijfbeveiliging ervan uit dat de computer wordt gedragen en wordt het detectieniveau gedurende 10 seconden op het maximum ingesteld.
Grondbeginselen 4-34 Gebruikershandleiding
Hoofdstuk 5 Het toetsenbord Het toetsenbord van de computer is compatibel met een uitgebreid toetsenbord met 101/102 toetsen. Door bepaalde toetsen tegelijkertijd in te drukken kunt u alle functies uitvoeren die op een toetsenbord met 101/102 toetsen beschikbaar zijn. Het aantal toetsen op uw toetsenbord is afhankelijk van de toetsenbordindeling waarmee uw computer is geconfigureerd. Er zijn toetsenborden voor verschillende talen beschikbaar.
Het toetsenbord Functietoetsen F1 … F12 De functietoetsen (niet te verwarren met de Fn-toets) zijn de 12 toetsen boven aan het toetsenbord. Deze toetsen werken anders dan de overige toetsen. F1 tot en met F12 worden aangeduid als functietoetsen, omdat u hiermee geprogrammeerde functies kunt uitvoeren. Als u pictogramtoetsen in combinatie met de Fn-toets gebruikt, worden specifieke functies op de computer uitgevoerd. Raadpleeg de paragraaf Softkeys: Fntoetscombinaties in dit hoofdstuk.
Het toetsenbord Het is mogelijk dat uw softwaretoepassing een toets vereist die niet op het toetsenbord voorkomt. Door de Fn-toets in combinatie met een van de volgende toetsen in te drukken emuleert u de functies van het uitgebreide toetsenbord. Druk op Fn + F10 of Fn + F11 om de geïntegreerde numerieke toetsen te activeren. De toetsen met grijze markering op de onderrand worden hierdoor cijfertoetsen (Fn + F11) of cursorbesturingstoetsen (Fn + F10).
Het toetsenbord Directe beveiliging: Als u op Fn + F1 drukt, wordt het scherm leeggemaakt, zodat niemand toegang tot uw gegevens kan verkrijgen. Om het scherm en de oorspronkelijke instellingen te herstellen drukt u op een willekeurige toets of drukt u op het dubbel aanwijsapparaat. Als een wachtwoord voor schermbeveiliging is geregistreerd, wordt een dialoogvenster geopend. Voer het schermbeveiligingswachtwoord in en klik op OK.
Het toetsenbord Beeldschermselectie: Met Fn + F5 wijzigt u het actieve beeldscherm. Wanneer u op deze sneltoets drukt, verschijnt er een dialoogvenster. Alleen apparaten die beschikbaar zijn voor selectie, worden weergegeven. Houd Fn ingedrukt en druk nogmaals op F5 om het apparaat te wijzigen. Wanneer u Fn en F5 loslaat, verandert het geselecteerde apparaat. Als u deze sneltoets vijf seconden lang ingedrukt houdt, wordt opnieuw het interne LCD geselecteerd.
Het toetsenbord Draadloze communicatie: Als uw computer zowel Bluetooth- als draadloze LAN-functies heeft, kunt u op Fn + F8 drukken om te kiezen welk type draadloze communicatie u wilt gebruiken. Wanneer u op deze sneltoets drukt, verschijnt een dialoogvenster. Houd Fn ingedrukt en druk op F8 om de instelling te wijzigen. Als draadloze communicatie is uitgeschakeld, wordt op het scherm gemeld dat de draadlozecommunicatieschakelaar op uit staat.
Het toetsenbord TOSHIBA-hulpprogramma Zoom (vergroten): Om de pictogrammen op het bureaublad of in het toepassingsvenster te vergroten drukt u op 2 terwijl u Fn ingedrukt houdt. Fn-plaktoets Met het hulpprogramma TOSHIBA Accessibility kunt u de Fn-toets vergrendelen, zodat u deze toets bij het gebruik van toetscombinaties niet ingedrukt hoeft te houden. In plaats hiervan drukt u eenmaal op de Fntoets, laat u de toets los en drukt u op een functietoets (F1 … F12).
Het toetsenbord Geïntegreerde numerieke toetsen In plaats van een apart numeriek toetsenblok heeft het toetsenbord van uw computer geïntegreerde numerieke toetsen. De toetsen met de grijze opschriften in het midden van het toetsenbord zijn de geïntegreerde numerieke toetsen. Deze toetsen hebben dezelfde functie als de numerieke toetsenbloktoetsen van het uitgebreide toetsenbord met 101/102 toetsen in afbeelding 5-2.
Het toetsenbord Tijdelijk het gewone toetsenbord gebruiken (geïntegreerde numerieke toetsen aan) Tijdens het gebruik van de geïntegreerde numerieke toetsen kunt u tijdelijk met het gewone toetsenbord werken zonder de geïntegreerde numerieke toetsen uit te schakelen: 1. Houd Fn ingedrukt en druk op een andere toets. Alle toetsen werken alsof de geïntegreerde numerieke toetsen zijn uitgeschakeld. 2. Typ hoofdletters door Fn + Shift ingedrukt te houden en op een lettertoets te drukken. 3.
Het toetsenbord Als de geïntegreerde numerieke toetsen zijn uitgeschakeld, voert u de volgende stappen uit: 1. Houd Alt + Fn ingedrukt. 2. Typ de ASCII-code met behulp van de geïntegreerde numerieke toetsen. 3. Laat Alt + Fn los; het ASCII-teken verschijnt op het scherm.
Hoofdstuk 6 Stroomvoorziening en spaarstanden De computer kan via de netadapter, de accu-eenheid of de interne accu van stroom worden voorzien. In dit hoofdstuk leest u hoe u deze energiebronnen optimaal gebruikt en hoe u de accu oplaadt en vervangt. Verder worden tips gegeven voor het besparen van accu-energie en krijgt u informatie over spaarstanden.
Stroomvoorziening en spaarstanden Tabel 6-1 Stroomvoorziening (vervolg) Stroom ingeschakeld Stroom uitgeschakeld (buiten werking) Netadapter Acculading is • In werking niet boven • Lampje: Accu uit aangesloten activeringsniveau DC IN uit lage acculading Acculading is • In werking onder • Lampje: Accu activeringsniveau knippert oranje lage acculading DC IN uit Accu is leeg Computer wordt afgesloten*1 Geen accu geïnstalleerd • Buiten werking • Lampje: Accu uit DC IN uit *1 Om de computer te kunnen afs
Stroomvoorziening en spaarstanden Voedingslampjes Zoals in de vorige tabel wordt aangegeven, maken het accu-, DC IN- en aan/uit-lampje op het paneel met systeemlampjes u attent op de bedrijfscapaciteit en de accu-energiestatus van de computer. Acculampje Aan de hand van het acculampje kunt u de status van de accu controleren. De accustatus wordt als volgt aangeduid: Lampje knippert oranje De accu is bijna leeg. De netadapter moet worden aangesloten om de accu op te laden.
Stroomvoorziening en spaarstanden Aan/uit-lampje Aan de hand van het aan/uit-lampje kunt u de algemene stroomvoorzieningsstatus controleren: Lampje brandt groen Geeft aan dat de computer van stroom wordt voorzien en is ingeschakeld. Lampje knippert oranje Geeft aan dat de computer van stroom wordt voorzien en in de stand-by-modus staat. Het lampje is één seconde aan en twee seconden uit. Lampje brandt niet In alle andere omstandigheden is het lampje uit.
Stroomvoorziening en spaarstanden ■ De accu-eenheid bestaat uit een lithium-ion batterij. Indien de batterij onjuist wordt vervangen, gebruikt, gehanteerd of afgedankt, bestaat ontploffingsgevaar. Houd u bij het afdanken van de accu aan de plaatselijke verordeningen of voorschriften. Gebruik alleen accu’s die door TOSHIBA zijn aanbevolen. ■ Gebruik altijd de meegeleverde accu-eenheid of een gelijkwaardige accu-eenheid die wordt opgegeven in de gebruikershandleiding.
Stroomvoorziening en spaarstanden De RTC-batterij van de computer is een Ni-MH batterij en dient uitsluitend door uw dealer of een TOSHIBA-servicevertegenwoordiger te worden vervangen. Indien de batterij onjuist wordt vervangen, gebruikt, gehanteerd of afgedankt, bestaat ontploffingsgevaar. Houd u bij het afdanken van de accu aan de plaatselijke verordeningen of voorschriften.
Stroomvoorziening en spaarstanden ■ Verwijder de accu-eenheid nooit terwijl de functie Activering op LAN ingeschakeld is. Doet u dit toch, dan gaan gegevens verloren. Schakel de functie Activering op LAN uit alvorens de accu-eenheid te verwijderen. ■ Verwijder de accu-eenheid nooit terwijl de functie Activering op draadloos LAN is ingeschakeld. Doet u dit toch, dan gaan gegevens verloren. Schakel de functie Activering op draadloos LAN uit alvorens de accu-eenheid te verwijderen.
Stroomvoorziening en spaarstanden Tijd In de volgende tabel wordt aangegeven hoe lang het ongeveer duurt om een lege accu volledig op te laden. Oplaadtijd (uren) Type accu/batterij Stroom ingeschakeld Stroom uitgeschakeld Accu-eenheid (3600 mAh) 4,5 tot 10,0 of langer circa 3,0 Accu-eenheid (4400 mAh) 5,5 tot 12,0 of langer circa 3,0 RTC-batterij 8.
Stroomvoorziening en spaarstanden Als u de netadapter aangesloten laat, neemt de gebruiksduur van de accu-eenheid af. Gebruik de computer ten minste eenmaal per maand op accu-energie tot de eenheid totaal leeg is. Laad de accu vervolgens op. Accucapaciteit controleren De resterende accu-energie kan worden gecontroleerd in TOSHIBA Power Saver. ■ Wacht ten minste 16 seconden na het inschakelen van de computer voordat u probeert de resterende bedrijfstijd te controleren.
Stroomvoorziening en spaarstanden ■ de locatie waar u uw programma’s en gegevens opslaat; ■ het sluiten van het LCD-scherm wanneer u het toetsenbord niet gebruikt om energie te besparen; ■ de omgevingstemperatuur (de gebruiksduur neemt af bij lage temperaturen); ■ de toestand van de accupolen. Zorg dat de polen schoon blijven door ze met een schone, droge doek af te vegen voordat u de accu-eenheid installeert.
Stroomvoorziening en spaarstanden ■ Verwijder de accu-eenheid als u het systeem geruime tijd (langer dan een maand) niet gebruikt. ■ Ontkoppel de netadapter wanneer de accu volledig is opgeladen. Te lang laden van de accu leidt tot oververhitting en verkort de gebruiksduur. ■ Ontkoppel de netadapter als de computer langer dan acht uur buiten gebruik blijft. ■ Bewaar reserve-accu’s op een koele, droge plek zonder direct zonlicht. De accu-eenheid vervangen De accu-eenheid is een verbruiksartikel.
Stroomvoorziening en spaarstanden 6. Duw de accuontgrendeling in richting van de pijl getoond in afbeelding 6-1 om de accu-eenheid los te maken. Accuvergrendeling Ontgrendelingsschuif accuhouder Opening Accu-eenheid Afbeelding 6-1 De accu-eenheid vrijgeven 7. Plaats uw vingernagel in de opening en til de accu-eenheid omhoog. 8. Scheid de accu-eenheid en het accudeksel van elkaar door de klemmetjes los te maken.
Stroomvoorziening en spaarstanden 1. Bevestig het accudeksel op de accueenheid. 2. Plaats de accueenheid in de sleuf voor de accueenheid en vergrendel deze. Accuvergrendeling Accu-eenheid Afbeelding 6-3 De accu-eenheid vergrendelen 3. Zorg dat de accu-eenheid correct is geplaatst en dat de accuvergrendeling in de vergrendelde stand staat ( ). 4. Draai de computer om.
Stroomvoorziening en spaarstanden Het vak Gebruikerswachtwoord ■ Instellen (knop) Klik op deze knop om een wachtwoord van maximaal 50 tekens te registreren. Na het instellen van een wachtwoord wordt u gevraagd het wachtwoord in te voeren wanneer u de computer opstart. Schakel ’Dezelfde tekenreeks tegelijk instellen met het gebruikerswachtwoord voor de vaste schijf’ in wanneer u het wachtwoord voor de vaste schijf instelt. ■ Wachtwoorden voor vaste schijven worden op sommige modellen niet ondersteund.
Stroomvoorziening en spaarstanden ■ Als u het gebruikerswachtwoord voor de vaste schijf vergeet, kan TOSHIBA u NIET helpen en wordt de vaste schijf VOLLEDIG en VOORGOED ONBRUIKBAAR. TOSHIBA kan NIET verantwoordelijk worden gesteld voor verlies van gegevens, voor het feit dat de vaste schijf niet bruikbaar of toegankelijk is of voor enig ander verlies dat u of een persoon in uw organisatie lijdt doordat de vaste schijf niet meer toegankelijk is.
Stroomvoorziening en spaarstanden Supervisorwachtwoord Als u een supervisorwachtwoord instelt, zijn bepaalde functies mogelijk beperkt wanneer een gebruiker zich aanmeldt met het gebruikerswachtwoord. Als u een supervisorwachtwoord wilt instellen, voert u het bestand TOSPU.EXE uit. De locatie van dit bestand is: C:\Program Files\Toshiba\Windows Utilities\SVPWTool\TOSPU.
Stroomvoorziening en spaarstanden Spaarstanden De computer heeft de volgende spaarstanden: ■ Opstartmodus: de computer wordt afgesloten zonder gegevens op te slaan. Sla uw werk altijd op voordat u de computer uitschakelt in de opstartmodus. ■ Slaapstand: de gegevens in het geheugen worden op de vaste schijf opgeslagen. ■ Stand-by: de gegevens worden bewaard in het hoofdgeheugen van de computer. Raadpleeg tevens de paragraaf De computer inschakelen en De computer uitschakelen in hoofdstuk 3, Voor u begint.
Stroomvoorziening en spaarstanden 6-18 Gebruikershandleiding
Hoofdstuk 7 HW Setup In dit hoofdstuk wordt uitgelegd hoe u de computer met het programma TOSHIBA HW Setup configureert en hoe u Execute-Disable Bit Capability en TPM instelt. HW Setup starten Klik achtereenvolgens op Start, Configuratiescherm, Printers en andere hardware en selecteer TOSHIBA HW Setup om HW Setup uit te voeren.
HW Setup Algemeen Dit venster toont de BIOS-versie en bevat twee knoppen: Standaard en Versie. Standaard De fabrieksinstellingen van alle HW Setup-opties herstellen. Info Versiegegevens van HW Setup weergeven. Setup Dit veld toont de BIOS-versie met de datum. Beeldscherm In dit tabblad kunt u de weergave-instellingen voor het interne LCD-scherm of een externe monitor opgeven. Beeldscherm bij opstarten Hiermee kunt u selecteren welk beeldscherm bij het opstarten van de computer moet worden gebruikt.
HW Setup Opstartprioriteit Opstartprioriteitsopties Hier kunt u de prioriteit voor het opstarten van de computer instellen. Selecteer een van de volgende instellingen: HDD −> FDD −> CD-ROM −> LAN De computer zoekt in deze volgorde naar opstartbare bestanden: Vaste schijf, diskettestation*1, CD-ROM*2 en LAN (standaardinstelling). FDD −> HDD −> CD-ROM −> LAN De computer zoekt in deze volgorde naar opstartbare bestanden: diskettestation*1, vaste schijf, CD-ROM*2 en LAN.
HW Setup Voer de volgende stappen uit om het opstartstation te wijzigen: 1. Houd F12 ingedrukt en start de computer op. 2. Een menu met de volgende pictogrammen wordt weergegeven: Interne vaste schijf, CD-ROM, diskettestation (of SD-geheugenkaart), netwerk (LAN), USB-geheugen. Onder het geselecteerde apparaat verschijnt een balk. 3. Gebruik de pijltoets links/rechts om het gewenste opstartapparaat te markeren en druk op Enter.
HW Setup Prioriteitsopties vaste schijf Als er meer dan één vaste schijf in de computer is geïnstalleerd, kunt u met deze optie de prioriteit voor schijfdetectie instellen. Als de eerste gedetecteerde vaste schijf een opstartopdracht heeft, wordt het systeem vanaf die schijf opgestart. Interne vaste schijf De prioriteit is ingesteld op interne vaste schijf -> USB. -> USB (standaardinstelling) USB -> interne vaste schijf De prioriteit is ingesteld op USB -> interne vaste schijf.
HW Setup Toetsenbord Fn-toets op extern toetsenbord Met deze optie kunt u op een extern toetsenbord een toetscombinatie instellen die de Fn-toets op het interne toetsenbord van de computer emuleert. Als u een toetscombinatie ter vervanging van de Fn-toets instelt, kunt u sneltoetsen gebruiken door de ingestelde combinatie in te drukken in plaats van de Fn-toets (alleen van toepassing op PS/2-toetsenborden). Uitgeschakeld Geen Fn-toetsequivalent (standaardinstelling).
HW Setup CPU Met deze functie kunt u de bedrijfsmodus van de CPU instellen. Deze optie wordt alleen weergegeven op modellen met een Intel® Core™ Duo-processor of een Intel® Core™ Solo-processor. Dynamische CPU-frequentiemodus Deze optie biedt de keuze uit de volgende instellingen: Dynamisch schakelbaar De schakelfunctie voor het energieverbruik en de kloksnelheid van de processor is ingeschakeld.
HW Setup Apparaatconfiguratie Apparaatconfiguratie Met deze optie kunt u de apparaatconfiguratie instellen. Alle apparaten Alle apparaten worden door het BIOS ingesteld. Config door best.sys Het besturingssysteem stelt de apparaten in die door het besturingssysteem kunnen worden bestuurd (standaardinstelling). Parallel/Printer Op sommige modellen is het tabblad Parallel/Printer beschikbaar. In dit tabblad kunt u de parallelle-poortmodus instellen.
HW Setup Emulatie USB Legacy-diskettestations Met deze optie schakelt u emulatie van overerfde USB-diskettestations in of uit. Zelfs als USB niet door uw besturingssysteem wordt ondersteund, kunt u een USB-diskettestation gebruiken door de optie Emulatie USB Legacy-diskettestations in te schakelen. Ingeschakeld Schakelt emulatie van USB Legacydiskettestations in (standaardinstelling). Uitgeschakeld Schakelt emulatie van USB Legacydiskettestations uit.
HW Setup Het BIOS Setup-hulpprogramma afsluiten Sla de wijzigingen op en sluit het programma af. 1. Druk op End. Het bericht “Are you sure? (Y/N) The changes you made will cause the system to reboot.” wordt weergegeven. 2. Druk op J. De geconfigureerde instellingen worden opgeslagen en het BIOS Setup-hulpprogramma wordt afgesloten. Afhankelijk van de gewijzigde instellingen start de computer mogelijk opnieuw op.
HW Setup De opdracht Enabled staat het gebruik van de Intel-virtualisatietechnologie toe. Ingeschakeld Schakelt virtualisatietechnologie in. Uitgeschakeld Schakelt virtualisatietechnologie uit (standaard). Enhanced C-States Deze functie schakelt Enhanced C-States in of uit. Ingeschakeld Hiermee verlaagt u het stroomverbruik. Uitgeschakeld Het stroomverbruik wordt niet verlaagd.
HW Setup TPM Deze optie is alleen beschikbaar op modellen met een ingebouwde TPM-module. Met deze instelling wordt de beveiligingscontroller, ook wel TPM (Trusted Platform Module) genoemd, in- of uitgeschakeld. Ingeschakeld Schakelt de TPM in. Uitgeschakeld Schakelt de TPM uit (standaardinstelling). Clear TPM Owner Deze instelling wordt gebruikt om de gegevens in TPM te wissen wanneer u de computer weggooit of als de computer van eigenaar verandert.
HW Setup Beep Volume Stel het volume in op High, Medium of Off. High (Hoog) Hiermee wordt het volume ingesteld op hoog. Gemiddeld Hiermee wordt het volume ingesteld op (standaardinstelling) hoog.gemiddeld. Low (Laag) Hiermee wordt het volume ingesteld op hoog.laag. Uit Hiermee wordt het volume gedempt.
HW Setup 7-14 Gebruikershandleiding
Hoofdstuk 8 Optionele apparaten Optionele apparaten kunnen de capaciteiten en de veelzijdigheid van de computer uitbreiden. In dit hoofdstuk wordt ingegaan op de aansluiting of installatie van de volgende apparaten, die beschikbaar zijn bij uw TOSHIBA-leverancier: Kaarten/geheugen ■ PC-kaart ■ SD-kaart ■ Geheugenuitbreiding Voedingsapparaten ■ Accu-eenheid ■ Netadapter ■ Accuoplader Randapparaten ■ ■ ■ ■ ■ USB-diskettestation Externe monitor i.
Optionele apparaten PC-kaart De computer is uitgerust met een PC-kaartsleuf die ruimte biedt voor één Type II-kaart. U kunt elke standaard PC-kaart (van TOSHIBA of een andere leverancier) installeren. De sleuf ondersteunt 16-bits PC-kaarten, met inbegrip van multifunctionele kaarten en CardBus-PC-kaarten. CardBus ondersteunt de nieuwe standaard van 32-bits PC-kaarten. De bus levert superieure prestaties voor de hogere eisen van multimediagegevensoverdracht.
Optionele apparaten Een PC-kaart verwijderen Voer de volgende stappen uit om de PC-kaart te verwijderen. 1. Open het pictogram Hardware veilig verwijderen op de taakbalk. 2. Wijs PC-kaart aan en klik. 3. Druk op de uitwerpknop van de PC-kaart. De knop steekt nu uit. Als de PC-kaart niet volledig is geplaatst, kan de uitwerpknop de kaart mogelijk niet ver genoeg uitwerpen, zodat u deze niet goed kunt beetpakken. Druk de PC-kaart in de computer en verschuif vervolgens opnieuw op de uitwerpknop. 4.
Optionele apparaten SD-geheugenkaarten zijn ontwikkeld met SDMI (Secure Digital Music Initiative), een technologie ter voorkoming van het illegaal kopiëren of afspelen van digitale muziek. U kunt beschermd materiaal dus niet op andere computers of apparaten afspelen of naar andere computers of apparaten kopiëren. U mag auteursrechtelijk beschermd materiaal alleen verveelvoudigen voor privégebruik.
Optionele apparaten Een SD-kaart verwijderen Voer de volgende stappen uit om een SD-kaart te verwijderen. 1. Open het pictogram Hardware veilig verwijderen op de taakbalk. 2. Wijs SD-kaart aan en klik. 3. Duw op de kaart SD-kaart en laat weer los, zodat de kaart iets naar voren komt. 4. Verwijder de SD-kaart. SD-kaart Afbeelding 8-4 Een SD-kaart verwijderen ■ Zorg dat het lampje voor de SD-kaart uit is voordat u de SD-kaart verwijdert of de computer uitschakelt.
Optionele apparaten Een opstartschijf maken Met het TOSHIBA-hulpprogramma Opstartbare SD-kaart kunt u desgewenst een opstartbare SD-geheugenkaart maken. Zie Hulpprogramma’s in hoofdstuk 1, Inleiding, voor meer informatie. Geheugenuitbreiding U kunt het RAM-geheugen van de computer uitbreiden door extra geheugenmodules te installeren. In dit gedeelte wordt beschreven hoe u een geheugenmodule installeert en verwijdert.
Optionele apparaten Als er alleen een fout in Sleuf A is: knippert herhaaldelijk tweemaal oranje, daarna groen. Als er alleen een fout in Sleuf B is: knippert herhaaldelijk oranje, daarna tweemaal groen. Als er een fout in Sleuf B en Sleuf B is: knippert herhaaldelijk tweemaal oranje, daarna tweemaal groen. Gebruik een kruiskopschroevendraaier nummer 0 om de schroeven te verwijderen en vast te draaien. Als u een incorrecte schroevendraaier gebruikt, bestaat het risico dat de schroefkoppen beschadigd raken.
Optionele apparaten 6. Breng het uitstekende gedeelte van de geheugenmodule op één lijn met de geheugensleuf en plaats de module voorzichtig in de sleuf onder een hoek van ongeveer 45 graden. Duw de module vervolgens omlaag tot deze aan weerszijden vastklikt. Geheugenmodule Sleuf A Sleuf B Afbeelding 8-6 De geheugenmodule plaatsen Plaats de groeven aan de randen van de geheugenmodule tegenover de vergrendellipjes op de connector en sluit de module stevig aan op de connector.
Optionele apparaten 8. Installeer de accu-eenheid. Raadpleeg de paragraaf De accu-eenheid vervangen in hoofdstuk 6, Stroomvoorziening en spaarstanden, voor meer informatie. 9. Draai de computer om. 10. Schakel de computer in en controleer of het toegevoegde geheugen wordt herkend. Klik achtereenvolgens op Start, Configuratiescherm en Prestaties en onderhoud en selecteer het pictogram Systeem. Open het venster Systeemeigenschappen en klik op het tabblad Algemeen.
Optionele apparaten 8. Plaats het afdekplaatje van de geheugenmodule terug en bevestig het met één schroef. Sluit de deksel stevig. 9. Installeer de accu-eenheid. Raadpleeg de paragraaf De accu-eenheid vervangen in hoofdstuk 6, Stroomvoorziening en spaarstanden, voor meer informatie. 10. Draai de computer om. Accu-eenheid U kunt de draagbaarheid van de computer verbeteren met extra accueenheden.
Optionele apparaten Externe monitor Op de computerpoort voor de externe monitor kan een externe analoge monitor worden aangesloten. De computer ondersteunt WXGA-videomodi. Voer de volgende stappen uit om een monitor aan te sluiten. 1. Schakel de computer uit. 2. Sluit de monitorkabel aan op de poort voor de externe monitor en draai de schroeven links en rechts ervan aan. Externe monitorpoort Monitorkabel Afbeelding 8-15 De monitorkabel aansluiten op de poort voor de externe monitor 3.
Optionele apparaten Tv U kunt een televisie aansluiten op de video-out-aansluiting van de computer. Voer de volgende stappen uit. Niet alle modellen hebben een video out-aansluiting (TV out). De TOSHIBA Assist- of TOSHIBA-presentatieknop gebruiken 1. Sluit de S-Video-plug van de tv-adapterkabel aan op de Video-outaansluiting van de computer. S-Video-plus van de tv-adapterkabel Video-out-bus Afbeelding 8-16 De S-Video-kabel aansluiten op de Video-out-aansluiting 2.
Optionele apparaten Als een televisie op de computer (model met Intel® Core™ Duo/Soloprocessor) is aangesloten, stelt u het tv-type in het venster Eigenschappen voor Beeldscherm in. Voer de volgende stappen uit. a. Klik op Start en vervolgens op Configuratiescherm. b. Dubbelklik op het pictogram Beeldscherm om het venster Eigenschappen voor Beeldscherm te openen. c. Klik op de tab Instellingen en vervolgens op de knop Geavanceerd. d.
Optionele apparaten De resolutie wijzigen Volg de onderstaande stappen om de beeldschermresolutie in te stellen nadat u een TV hebt aangesloten. 1. Open het venster Eigenschappen voor Beeldscherm en selecteer de tab Instellingen. 2. Selecteer Geavanceerd. 3. Klik op de tab Adapter en selecteer vervolgens Alle modi weergeven. 4. Selecteer 1024 x 768, True Color (32-bits), 60 Hertz. i.LINK (IEEE1394) Sommige modellen hebben geen i.LINK (IEEE1394)-poort. i.
Optionele apparaten ■ Controleer of de gegevensoverdracht is voltooid of schakel de computer uit voordat u: ■ een iLINK-apparaat aansluit op/loskoppelt van de computer; ■ Een iLINK-apparaat aansluit op/loskoppelt van een ander iLINKapparaat dat op de computer is aangesloten. Aansluiten 1. Zorg dat de connectoren goed ineengrijpen en koppel de i.LINK- (IEEE 1394-)kabel aan de computer. i.LINK-poort (IEEE 1394) i.LINK (IEEE1394)connector Afbeelding 8-17 De i.
Optionele apparaten Advanced Port Replicator III Plus De Advanced Port Replicator III Plus biedt een seriële poort en aparte poorten voor PS/2-muis en PS/2-toetsenbord, als aanvulling op de poorten van de computer. De Advanced Port Replicator III Plus wordt rechtstreeks aan de docking-interface op de onderkant van de computer gekoppeld. De Advanced Port Replicator III Plus wordt via de netadapter op een voedingsbron aangesloten.
Optionele apparaten De volgende poorten en accessoires zijn beschikbaar op de Advanced Port Replicator III Plus. ■ RJ45-LAN-aansluiting ■ RJ11-modemaansluiting ■ Externe monitorpoort ■ Parallelpoort ■ Seriële poort ■ PS/2-muispoort ■ PS/2-toetsenbordpoort ■ Gelijkstroomingang (15 V) ■ Beveiligingsslotsleuf ■ Line-in- en line-out-bus (audio) ■ Universal Serial Bus 2.0-poort (vier) ■ i.
Optionele apparaten Beveiligingsslot Met een beveiligingsslot kunt u uw computer en optionele Advanced Port Replicator III Plus vastmaken aan een bureau of ander zwaar object, zodat uw computer of Advanced Port Replicator III Plus niet zonder toestemming kan worden weggehaald. De computer heeft een beveiligingsslot aan de linkerkant. Bevestig één uiteinde van een kabel aan een bureau en het andere uiteinde aan de sleuf voor het beveiligingsslot. 1. Zet de computer met de linkerkant naar u toe. 2.
Hoofdstuk 9 Probleemoplossing TOSHIBA-computers hebben een duurzaam ontwerp. Mochten er echter problemen optreden, dan kunt u aan de hand van de procedures in dit hoofdstuk bepalen wat er aan de hand is. Alle gebruikers dienen dit hoofdstuk te lezen. Als u weet wat er fout kan gaan, kunt u bepaalde problemen wellicht vermijden.
Probleemoplossing Algemene controlepunten Overweeg eerst de eenvoudigste oplossing. De punten in deze lijst zijn eenvoudig te controleren maar kunnen ten grondslag liggen aan schijnbaar ernstige problemen. ■ Zet alle randapparatuur aan alvorens u de computer aanzet. Hiertoe behoren ook de printer en alle externe apparatuur waarvan u gebruik maakt. ■ Schakel de computer uit voordat u een extern apparaat aansluit. Het nieuwe apparaat wordt automatisch herkend wanneer u de computer weer inschakelt.
Probleemoplossing Software Hardware De problemen worden wellicht door uw software of schijfje veroorzaakt. Als u een softwarepakket niet kunt laden is het medium of het programma misschien beschadigd. Probeer een andere kopie van de software te laden. Als tijdens het gebruik van een softwarepakket een foutbericht verschijnt, raadpleegt u de softwaredocumentatie. Deze documentatie bevat meestal een gedeelte over probleemoplossing of een samenvatting van foutberichten.
Probleemoplossing Opstartprocedure van het systeem Als de computer niet correct wordt opgestart, controleert u het volgende: ■ zelftest ■ voedingsbronnen ■ wachtwoord voor opstarten Zelftest Wanneer de computer wordt opgestart, wordt de zelftest automatisch uitgevoerd en verschijnt het volgende bericht op het scherm: S In Touch with Tomorrow TOSHIBA Dit bericht blijft enkele seconden zichtbaar.
Probleemoplossing Uitschakelen bij oververhitting Als de interne temperatuur van de computer te hoog oploopt, wordt de computer automatisch in de slaapstand of stand-by gezet en afgesloten. Probleem Procedure Computer wordt afgesloten en DC INlampje knippert oranje. Laat de computer uit tot het DC IN-lampje ophoudt met knipperen. Het verdient aanbeveling de computer uit te laten staan tot de interne onderdelen op kamertemperatuur zijn gekomen, zelfs als het DC IN-lampje niet meer knippert.
Probleemoplossing Accu Als u een probleem met de accu vermoedt, controleert u het DC IN-lampje en het accu-lampje. Raadpleeg hoofdstuk 6, Stroomvoorziening en spaarstanden, voor informatie over de lampjes en de werking van de accu. Probleem Procedure Accu voorziet de computer niet van stroom. De accu is wellicht ontladen. Sluit de netadapter aan om de accu op te laden. Accu wordt niet opgeladen wanneer de netadapter is aangesloten (acculampje brandt niet oranje).
Probleemoplossing RTC (Real Time Clock) Probleem Procedure Het volgende bericht verschijnt op het LCDscherm: RTC battery is low or CMOS checksum is inconsistent. Press [F1] key to set Date/Time. De RTC-batterij heeft geen lading meer. U moet de datum en tijd opnieuw instellen via BIOS Setup door de volgende stappen uit te voeren: 1. Druk op F1. BIOS Setup wordt geopend. 2. Geef de datum op met System Date. 3. Geef de tijd op met System Time. 4. Druk op End. U ziet een bevestigingsbericht. 5. Druk op Y.
Probleemoplossing Intern LCD-beeldscherm LCD-problemen kunnen te maken hebben met de computerconfiguratie. Raadpleeg hoofdstuk 7, HW Setup voor meer informatie. Probleem Procedure Het scherm blijft leeg. Druk op de sneltoets Fn + F5 om de beeldschermprioriteit te wijzigen, zodat deze niet op een externe monitor is ingesteld. Er zitten vlekken op het LCD-scherm. Deze vlekken kunnen zijn veroorzaakt door contact met het toetsenbord, het touchpad of de AccuPoint.
Probleemoplossing CD-ROM-station Probleem Procedure U kunt geen toegang Controleer of de stationslade goed dicht zit. Duw krijgen tot een CD in het zachtjes totdat de lade vastklikt. station. Controleer of het station is ingeschakeld. Als het station is uitgeschakeld, klikt u op het pictogram van het optische station in het systeemvak om dit in te schakelen. Open de schijflade en controleer of de CD goed ligt: plat op het ladeoppervlak met het opschrift omhoog.
Probleemoplossing DVD-ROM-station Probleem Procedure U kunt geen toegang Controleer of de stationslade goed dicht zit. Duw krijgen tot een CD/DVD zachtjes totdat de lade vastklikt. in het station. Controleer of het station is ingeschakeld. Als het station is uitgeschakeld, klikt u op het pictogram van het optische station in het systeemvak om dit in te schakelen. Open de schijflade en controleer of de CD/DVD goed ligt: plat op het ladeoppervlak met het opschrift omhoog.
Probleemoplossing DVD-ROM- & CD-R/RW-station Raadpleeg hoofdstuk 4, Grondbeginselen, voor meer informatie. Probleem Procedure U kunt geen toegang Controleer of de stationslade goed dicht zit. Duw krijgen tot een CD/DVD zachtjes totdat de lade vastklikt. in het station. Controleer of het station is ingeschakeld. Als het station is uitgeschakeld, klikt u op het pictogram van het optische station in het systeemvak om dit in te schakelen.
Probleemoplossing Probleem Procedure Kan niet goed schrijven. Indien er problemen zijn met schrijven, controleert u of u de volgende voorschriften in acht hebt genomen: ■ Gebruik alleen schijven die door TOSHIBA zijn aanbevolen. ■ Gebruik het aanwijsapparaat of toetsenbord niet tijdens het schrijven. ■ Gebruik alleen de software die bij de computer is geleverd voor het opnemen van gegevens. ■ Gebruik of start geen andere software tijdens het schrijven.
Probleemoplossing Sommige CD’s/DVD’s worden correct uitgevoerd, maar andere niet. Het probleem kan worden veroorzaakt door de software- of hardwareconfiguratie. Controleer of de hardwareconfiguratie correct is voor de software. Lees de documentatie bij de CD/DVD na. Controleer welk type CD/DVD u gebruikt.
Probleemoplossing SD-kaart Raadpleeg ook hoofdstuk 8, Optionele apparaten. Probleem Procedure Fout met SD-kaart Plaats de SD-kaart opnieuw om te zorgen dat deze stevig vastzit. Raadpleeg de documentatie bij de kaart. U kunt niet schrijven naar een SD-geheugenkaart. Controleer of de kaart beveiligd is tegen schrijven. U kunt een bestand niet lezen. Controleer of de SD-geheugenkaart die in de sleuf is ingebracht, het gewenste bestand bevat. Als de problemen aanhouden, neemt u contact op met uw dealer.
Probleemoplossing Aanwijsapparaat Als u een USB-muis gebruikt, raadpleeg dan tevens de paragraaf USB-apparaat in dit hoofdstuk en de documentatie bij de muis. Touchpad Probleem Procedure Het touchpad werkt niet. Controleer de instellingen voor apparaatselectie. Klik achtereenvolgens op Start, Configuratiescherm, Printers en andere hardware en selecteer het pictogram Muis. Open het venster Eigenschappen voor Muis en klik op de tab Dubbel aanwijsapparaat.
Probleemoplossing USB-muis Probleem Procedure Schermaanwijzer reageert niet wanneer de muis wordt gebruikt. Misschien is het systeem bezet. Als de aanwijzer de vorm van een zandloper heeft, wacht u tot de aanwijzer weer de normale vorm heeft en probeert u het opnieuw. Controleer of de muis correct op de USB-poort is aangesloten. 9-16 Dubbelklikken werkt niet. Wijzig de dubbelkliksnelheid in het hulpprogramma voor muisbesturing. 1.
Probleemoplossing USB-apparaat Raadpleeg tevens de documentatie bij uw USB-apparaat. Probleem Procedure USB-apparaat werkt niet. Controleer of de kabelverbinding tussen de USB-poorten op de computer en het USBapparaat in orde is. Controleer of de USBapparaatstuurprogramma’s correct zijn geïnstalleerd. Raadpleeg uw Windows XPdocumentatie voor informatie over het controleren van de stuurprogramma’s. Als uw besturingssysteem geen USB ondersteunt, kunt u toch een USB-muis en/of USB-toetsenbord gebruiken.
Probleemoplossing Geheugenuitbreiding Raadpleeg ook hoofdstuk 8, Optionele apparaten voor informatie over het installeren van geheugenmodules. Probleem Procedure Als er een geheugenstoring optreedt, gaat het Aan/ uit-lampje knipperen (0,5 seconden aan, 0,5 seconden uit) op de volgende manieren: Als er alleen een fout in Sleuf A is: knippert herhaaldelijk tweemaal oranje, daarna groen. Als er alleen een fout in Sleuf B is: knippert herhaaldelijk oranje, daarna tweemaal groen.
Probleemoplossing Probleem Procedure Hinderlijk geluid hoorbaar. Misschien is er sprake van akoestische terugkoppeling ofwel “feedback”. Raadpleeg de paragraaf Geluidssysteem in Hoofdstuk 4, Grondbeginselen. Als de problemen aanhouden, neemt u contact op met uw dealer. Externe monitor Raadpleeg ook hoofdstuk 8, Optionele apparaten, en de documentatie bij uw monitor. Probleem Procedure Monitor kan niet worden ingeschakeld Controleer of de aan/uit-schakelaar van de externe monitor op aan staat.
Probleemoplossing Modem 9-20 Probleem Procedure Communicatiesoftwar e kan de modem niet initialiseren. Controleer of de modeminstellingen van de computer correct zijn. Raadpleeg Telefoon- en modemopties in het Configuratiescherm. U hoort een kiestoon maar u kunt niet bellen. Als u een PBX-verbinding gebruikt, dient u te zorgen dat de functie voor toonkeuzedetectie van de toepassing is uitgeschakeld. U kunt tevens de opdracht ATX gebruiken.
Probleemoplossing LAN Probleem Procedure Kan geen toegang krijgen tot het LAN. Controleer of de kabel tussen de LAN-poort en de LAN-hub stevig is aangesloten. Activering op LAN werkt niet. Controleer of de netadapter is aangesloten. De functie Activering op LAN werkt niet zonder de netadapter. Als de problemen aanhouden, raadpleegt u de LAN-beheerder. Draadloos LAN Als u na het uitvoeren van de volgende procedure nog steeds geen toegang tot het LAN hebt, neemt u contact op met de netwerkbeheerder.
Probleemoplossing Printer Raadpleeg ook het gedeelte Seriële poort van hoofdstuk 8, Optionele apparaten, en de probleemoplossing en andere relevante gedeelten in de documentatie bij uw printer en software. Een Advanced Port Replicator III Plus is voorzien van een parallelle poort. Probleem Procedure Printer kan niet worden Ga na of de printer op een stopcontact is ingeschakeld. aangesloten. Controleer of het stopcontact stroom levert door er een ander apparaat op aan te sluiten.
Probleemoplossing Pc en pc-accu verwijderen ■ Verwijder deze pc overeenkomstig de toepasselijke wetten en voorschriften. Raadpleeg uw lokale overheid voor nadere informatie. ■ Deze pc is uitgerust met een oplaadbare accu. Na herhaaldelijk gebruik zal de accu uiteindelijk niet meer kunnen worden opgeladen en moet deze worden vervangen. Volgens de geldende wetten en voorschriften is het mogelijk niet toegestaan om oude accu’s weg te gooien met het huisvuil. ■ Denk om het milieu.
Probleemoplossing TOSHIBA-ondersteuning Als u extra technische hulp nodig hebt of als u problemen hebt bij het gebruik van de computer, kunt u contact opnemen met TOSHIBA. Voordat u opbelt Aangezien sommige problemen wellicht te wijten zijn aan het besturingssysteem of het programma dat u gebruikt, is het belangrijk om eerst andere hulpbronnen te raadplegen.
Hoofdstuk 10 Wettelijke voetnoten Dit hoofdstuk bevat de wettelijke voetnoten die van toepassing zijn op TOSHIBA-computers. In deze handleiding wordt met *XX aangegeven welke wettelijke voetnoot betrekking heeft op TOSHIBA-computers. Verklaringen die betrekking hebben op deze computer, worden in deze handleiding gemarkeerd met de aanduiding *XX in blauw. Wanneer u op *XX klikt, wordt de corresponderende verklaring weergegeven.
Wettelijke voetnoten De CPU-prestaties kunnen bovendien afwijken van de specificaties als gevolg van de ontwerpconfiguratie. In bepaalde omstandigheden kan het gebeuren dat de computer wordt uitgeschakeld. Dit is een normale beschermende maatregel ter voorkoming van gegevensverlies of beschadiging van het product bij gebruik buiten de aanbevolen omstandigheden. Vermijd het risico van gegevensverlies door altijd back-ups van gegevens te maken.
Wettelijke voetnoten Capaciteit van vaste schijf (HDD)*4 1 Gigabyte (GB) is 109 = 1.000.000.000 bytes in het decimale talstelsel. Het besturingssysteem van de computer gebruikt echter het binaire talstelsel en definieert de opslagcapaciteit dus als volgt: 1 GB = 230 = 1.073.741.824 bytes. Hierdoor wordt een lagere opslagcapaciteit weergegeven.
Wettelijke voetnoten Kopieerbeveiliging*9 Technologie ter bescherming van het auteursrecht in sommige media verhindert mogelijk het weergeven en opnemen van die media. Afbeeldingen*10 Alle afbeeldingen zijn gesimuleerd voor illustratiedoeleinden.
Bijlage A Specificaties Deze bijlage verschaft een overzicht van de technische kenmerken van de computer. Gewicht en afmetingen Gewicht (standaard) Maximaal 2,98 kg, geconfigureerd met: 15,4-inch WXGA, 1.024 MB+1.024 MB RAM, vaste schijf van 100 GB, DVD-Super Multi-station, draadloos LAN, Bluetooth. Minimaal 2,85 kg, geconfigureerd met: 15,4-inch WXGA, 256 MB+0 MB RAM, vaste schijf van 40 GB, CD-ROM-station.
Specificaties Stroomvoorziening Netadapter 100-240 V (wisselstroom) 50 of 60 hertz (cycli per seconde) Computer 15 V (gelijkstroom) 4,0 ampère Ingebouwde modem Network control unit (NCU) Type NCU AA Type lijn Telefoonlijn (alleen analoog) Keuzesysteem Puls Toon Besturingsopdracht AT-opdrachten EIA-578-opdrachten Controlefunctie Computerluidspreker Communicatiespecificaties Communicatiesysteem Data: Fax: Fullduplex Halfduplex Communicatieprotocol Data ITU-T-Rec (voorheen CCITT) Bell Fax ITU-
Specificaties Verzendniveau -10 dBm Ontvangstniveau -10 tot -40 dBm Invoer-/ uitvoerimpedantie 600 ohm ±30% Foutcorrectie MNP klasse 4 en ITU-T V.42 Datacompressie MNP klasse 5 en ITU-T V.
Specificaties A-4 Gebruikershandleiding
Bijlage B Beeldschermcontroller en videomodi Beeldschermcontroller De beeldschermcontroller zet software-opdrachten om in hardwareopdrachten die bepaalde elementen op het scherm in- of uitschakelen. ■ 15,4-inch WXGA, 1280 horizontale x 800 verticale pixels Aangezien het LCD-scherm een hogere resolutie heeft, kunnen regels worden afgebroken in de DOS-modus. Een op de computer aangesloten externe monitor met hoge resolutie kan maximaal 2.048 horizontale en 1.
Beeldschermcontroller en videomodi Tabel 1 Videomodi (VGA) Videomodus Type Resolutie Tekenmatrix (pixels) Kleuren Verticale scanfrequentie (Hz) 0, 1 VGA tekst 40 × 25 tekens 8×8 16 van 256K 70 2, 3 VGA tekst 80 × 25 tekens 8×8 16 van 256K 70 0*, 1* VGA tekst 40 × 25 tekens 8 × 14 16 van 256K 70 2*, 3* VGA tekst 80 × 25 tekens 8 × 14 16 van 256K 70 0+, 1+ VGA tekst 40 × 25 tekens 9 × 16 16 van 256K 70 2+, 3+ VGA tekst 80 × 25 tekens 9 × 16 16 van 256K 70 4, 5 VGA g
Beeldschermcontroller en videomodi Tabel 1 Videomodi (VGA) vervolg Videomodus Type Resolutie Tekenmatrix (pixels) Kleuren Verticale scanfrequentie (Hz) D VGA graf. 320 × 200 pixels 8×8 16 van 256K 70 E VGA graf. 640 × 200 pixels 8×8 16 van 256K 70 F VGA graf. 640 × 350 pixels 8 × 14 Mono 70 10 VGA graf. 640 × 350 pixels 8 × 14 16 van 256K 70 11 VGA graf. 640 × 480 pixels 8 × 16 2 van 256K 60 12 VGA graf. 640 × 480 pixels 8 × 16 16 van 256K 60 13 VGA graf.
Beeldschermcontroller en videomodi Tabel 2 Videomodi (WXGA, model met Intel® Celeron® M-processor) Resolutie LCD-kleuren CRT-kleuren Verticale frequentie (Hz)**1 640 × 480 256/256K 256/256K 60 75 85 100 800 × 600 256/256K 256/256K 60 75 85 100 1024 × 768 256/256K 256/256K 60 75 85 100 1280 × 800 256/256K 256/256K 60 1280 × 1024 256/256K 256/256K 60 75 85 100 1600 × 1200 (virtueel alleen met LCD-scherm) 256/256K 256/256K 60 75 85 100 1920 × 1440 (virtueel alleen met LCD-scherm)
Beeldschermcontroller en videomodi Tabel 2 Videomodi (WXGA, model met Intel® Celeron® M-processor), vervolg Resolutie LCD-kleuren CRT-kleuren Verticale frequentie (Hz)**1 640 × 480 64K/64K 64K/64K 60 75 85 100 800 × 600 64K/64K 64K/64K 60 75 85 100 1024 × 768 64K/64K 64K/64K 60 75 85 100 1280 × 800 64K/64K 64K/64K 60 1280 × 1024 64K/64K 64K/64K 60 75 85 100 1600 × 1200 (virtueel alleen met LCD-scherm) 64K/64K 64K/64K 60 75 85 100 1920 × 1440 (virtueel alleen met LCD-scherm) 64K
Beeldschermcontroller en videomodi Tabel 2 Videomodi (WXGA, model met Intel® Celeron® M-processor), vervolg Resolutie LCD-kleuren CRT-kleuren Verticale frequentie (Hz)**1 640 × 480 16M/16M 16M/16M 60 75 85 100 800 × 600 16M/16M 16M/16M 60 75 85 100 1024 × 768 16M/16M 16M/16M 60 75 85 100 1280 × 800 16M/16M 16M/16M 60 1280 × 1024 16M/16M 16M/16M 60 75 85 100 1600 × 1200 (virtueel alleen met LCD-scherm) 16M/16M 16M/16M 60 75 85 100 1920 × 1440 (virtueel alleen met LCD-scherm) 16M
Beeldschermcontroller en videomodi Tabel 3 Videomodi (WXGA, model met Intel® Core™ Duo/Solo-processor) Resolutie LCD-kleuren CRT-kleuren Verticale frequentie (Hz)**1 640 × 480 256/256K 256/256K 60 75 85 100 800 × 600 256/256K 256/256K 60 75 85 100 1024 × 768 256/256K 256/256K 60 75 85 100 1280 × 800 256/256K 256/256K 60 75 85 100 1280 × 1024 256/256K 256/256K 60 75 85 100 1600 × 1200 (virtueel alleen met LCD-scherm) 256/256K 256/256K 60 75 85 100 1920 × 1440 (virtueel alleen met
Beeldschermcontroller en videomodi Tabel 3 Videomodi (WXGA, model met Intel® Core™ Duo/Solo-processor), vervolg Resolutie LCD-kleuren CRT-kleuren Verticale frequentie (Hz)**1 640 × 480 64K/64K 64K/64K 60 75 85 100 800 × 600 64K/64K 64K/64K 60 75 85 100 1024 × 768 64K/64K 64K/64K 60 75 85 100 1280 × 800 64K/64K 64K/64K 60 75 85 100 1280 × 1024 64K/64K 64K/64K 60 75 85 100 1600 × 1200 (virtueel alleen met LCD-scherm) 64K/64K 64K/64K 60 75 85 100 1920 × 1440 (virtueel alleen met LC
Beeldschermcontroller en videomodi Tabel 3 Videomodi (WXGA, model met Intel® Core™ Duo/Solo-processor), vervolg Resolutie LCD-kleuren CRT-kleuren Verticale frequentie (Hz)**1 640 × 480 16M/16M 16M/16M 60 75 85 100 800 × 600 16M/16M 16M/16M 60 75 85 100 1024 × 768 16M/16M 16M/16M 60 75 85 100 1280 × 800 16M/16M 16M/16M 60 75 85 100 1280 × 1024 16M/16M 16M/16M 60 75 85 100 1600 × 1200 (virtueel alleen met LCD-scherm) 16M/16M 16M/16M 60 75 85 100 1920 × 1440 (virtueel alleen met LC
Beeldschermcontroller en videomodi B-10 Gebruikershandleiding
Bijlage C Draadloos LAN Kaartspecificaties Model PCI-Ex MiniCard Compatibiliteit ■ IEEE 802.11-norm voor draadloos LAN ■ Wi-Fi (Wireless Fidelity), gecertificeerd door de Wi-Fi Alliance. Het logo “Wi-Fi certified” is een keurmerk van de Wi-Fi Alliance. Netwerkbesturingssysteem ■ Microsoft Windows® Networking Media Access Protocol ■ CSMA/CA (Collision Avoidance) met ACK (Acknowledgement) Gegevenssnelheid ■ Theoretische maximumsnelheid: 54 Mbps (IEEE802.11a/IEEE802.
Draadloos LAN Raadpleeg de publicatie “Informatie voor de Wireless LAN-gebruiker” voor informatie over de voorschriften die in uw land/regio van kracht zijn. RF-frequentie ■ Band 5 GHz (5150-5850 MHz) (Revisie A) ■ Band 2,4 GHz (2400-2483,5 MHz) (Revisie B, G) Modulatietechniek ■ DSSS-CCK, DSSS-DQPSK, DSSS-DBPSK (Revisie B) ■ OFDM-BPSK, OFDM-QPSK, OFDM-16QAM, OFDM-64QAM (Revisie A, G) Het bereik van het draadloze signaal is afhankelijk van de overdrachtssnelheid van de draadloze communicatie.
Draadloos LAN 7 2442 8 2447 9 2452 10 2457*1 11 2462 12 2467*2 13 2472*2 *1 Door de fabrikant ingestelde standaardkanalen *2 Raadpleeg de publicatie Landen/gebieden waarin gebruik is toegestaan voor de landen/regio’s waarin deze kanalen kunnen worden gebruikt.
Draadloos LAN C-4 60 5300 64 5320 100 5500 104 5520 108 5540 112 5560 116 5580 120 5600 124 5620 128 5640 132 5660 136 5680 140 5700 149 5745 153 5765 157 5785 161 5805 165 5825 Gebruikershandleiding
Bijlage D Onderlinge samenwerking tussen producten met Bluetoothtechnologie De Bluetooth™-kaarten van TOSHIBA kunnen worden gebruikt in combinatie met elk product met de Bluetooth-technologie dat is gebaseerd op de FHSS-radiotechnologie (FHSS = Frequency Hopping Spread Spectrum) en zijn compatibel met: ■ Bluetooth-specificatie Versie 2.0+EDR, zoals gedefinieerd en goedgekeurd door de Bluetooth Special Interest Group.
Onderlinge samenwerking tussen producten met Bluetooth-technologie ■ Bluetooth-technologie is een nieuwe, innovatieve technologie voor draadloze communicatie, en TOSHIBA staat niet garant voor compatibiliteit tussen haar Bluetooth™-producten en pc’s/apparaten die de Bluetooth-technologie gebruiken, met uitzondering van draagbare TOSHIBA-computers.
Onderlinge samenwerking tussen producten met Bluetooth-technologie Bluetooth-technologie en uw gezondheid Net als andere radioapparaten stralen producten met Bluetoothtechnologie hoogfrequente (HF) elektromagnetische energie uit. Het intensiteitsniveau van de energie die door apparaten met Bluetoothtechnologie wordt uitgestraald, is echter aanzienlijk lager dan dat van andere draadloze apparaten zoals mobiele telefoons.
Onderlinge samenwerking tussen producten met Bluetooth-technologie L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prét à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
Onderlinge samenwerking tussen producten met Bluetooth-technologie Let op: blootstelling aan hoogfrequente straling De uitgezonden energie van de Bluetooth™-kaart van TOSHIBA is aanzienlijk minder dan de in de FCC-regels opgenomen beperkingen voor blootstelling aan hoogfrequente signalen. Desondanks moet de Bluetooth™-kaart van TOSHIBA zodanig worden geplaatst dat de mogelijkheid van lichamelijk contact tijdens normaal gebruik tot een minimum wordt beperkt.
Onderlinge samenwerking tussen producten met Bluetooth-technologie De frequentiebandbreedte van deze apparatuur kan functioneren binnen hetzelfde bereik als industriële apparaten, wetenschappelijke apparaten, medische apparaten, magnetrons, gelicentieerde radiostations en niet-gelicentieerde gespecificeerde radiostations met laag vermogen voor mobiele systemen voor objectidentificatie (RFID) die worden gebruikt in productielijnen in fabrieken (Andere radiostations). 1.
Onderlinge samenwerking tussen producten met Bluetooth-technologie Apparaatvalidatie Dit apparaat is goedgekeurd conform Technical Conditions Compliance (compatibiliteit met technische voorwaarden) en behoort tot de klasse van radio-apparaten van gegevenscommunicatiesystemen met laag vermogen zoals gestipuleerd in de handelswetten op het gebied van telecommunicatie.
Onderlinge samenwerking tussen producten met Bluetooth-technologie D-8 Gebruikershandleiding
Bijlage E Netsnoer en connectoren De stekker van het netsnoer moet compatibel zijn met de diverse internationale wandcontactaansluitingen en het netsnoer moet voldoen aan de normen van het land/gebied waarin het wordt gebruikt.
Netsnoer en connectoren In Europa moet gebruik worden gemaakt van een dubbeldraads netsnoer van het type VDE, H05VVH2-F of H03VVH2-F, of van een driedraads netsnoer van het type VDE, H05VV-F. Voor de Verenigde Staten en Canada moeten twee-pins stekkers de configuratie 2-15P (250 V) of 1-15P (125 V) hebben, en drie-pins stekkers de configuratie 6-15P (250V) of 5-15P (125V), conform het U.S. National Electrical Code Handbook en de Canadian Electrical Code Part II.
Bijlage F TOSHIBA Timer voor diefstalbeveiliging Met deze functie kunt u een BIOS-wachtwoord instellen dat door een timer wordt geactiveerd. Hiermee wordt ongewenste toegang na diefstal voorkomen. Nadat deze limiet is verstreken, moet u een wachtwoord invoeren of vingerafdrukverificatie uitvoeren voor het BIOS en de vaste schijf om toegang te krijgen tot het systeem. U stelt machtigingen en limieten voor TOSHIBA Timer voor diefstalbeveiliging in via het TOSHIBA Wachtwoordhulpprogramma.
TOSHIBA Timer voor diefstalbeveiliging F-2 Gebruikershandleiding
Bijlage G Als uw computer wordt gestolen Ga verantwoord met uw computer om en probeer diefstal te verhinderen. U bent de eigenaar van een waardevol apparaat dat zeer aantrekkelijk is voor dieven: laat het dus nooit onbeheerd achter. Extra bescherming tegen diefstal is verkrijgbaar in de vorm van beveiligingskabels, waarmee u de notebook thuis of op kantoor aan een zwaar voorwerp kunt verankeren. Noteer het type, modelnummer en serienummer van uw computer en bewaar deze gegevens op een veilige plaats.
Als uw computer wordt gestolen TOSHIBA-diefstalregistratie Aan: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Duitsland Faxnummer: +49 (0) 941 7807 921 Land waarin computer is gestolen: Type computer: (bijv. Satellite Pro A120) Modelnummer: (bijv. PSAC1E005006G3) Serienummer: (bijv.
Woordenlijst In deze woordenlijst worden onderwerpen toegelicht die verband houden met deze handleiding. Alternatieve benamingen zijn ter referentie opgenomen.
Woordenlijst KB: Kilobyte LCD: Liquid Crystal Display (vloeibare-kristallenscherm) LED: Light Emitting Diode (indicatielampje) LSI: Large Scale Integration MB: megabyte MS-DOS: Microsoft Disk Operating System (schijfbesturingssysteem) OCR: Optical Character Recognition (optische tekenherkenning) PCB: Printed Circuit Board (printplaat) PCI: Peripheral Component Interconnect RAM: Random Access Memory RGB: rood, groen en blauw ROM: Read Only Memory RTC: Real Time Clock SCSI: Small Computer System Interface SI
Woordenlijst ANSI: American National Standards Institute. Een organisatie die normen voor een aantal technische sectoren definieert. Zo heeft ANSI de ASCII-standaard en andere informatieverwerkingsvoorschriften gedefinieerd. antistatisch: Eigenschap van materiaal dat wordt gebruikt ter voorkoming van het ontstaan van statische elektriciteit. apparaatstuurprogramma: Een programma dat de communicatie tussen een specifiek randapparaat en de computer bestuurt. Het bestand CONFIG.
Woordenlijst bit: Afgeleid van “binary digit” (binair cijfer), de basiseenheid van informatie die de computer gebruikt. Een bit kan de waarde 0 of 1 hebben. Acht bits vormen samen één byte. Zie ook byte en megabyte. bps: Bits per seconde. Meestal gebruikt ter aanduiding van de gegevensoverdrachtsnelheid van een modem. buffer: Het gedeelte van het computergeheugen waarin gegevens tijdelijk worden opgeslagen.
Woordenlijst CMOS: Complementary Metal-Oxide Semiconductor. Een elektronische schakeling die op een stukje silicone is aangebracht en die heel weinig stroom nodig heeft. Geïntegreerde schakelingen die compatibel zijn met de CMOS-technologie, kunnen dicht bijeen worden geplaatst en zijn uiterst betrouwbaar. COM1, COM2, COM3 en COM4: De namen voor de seriële en communicatiepoorten. communicatie: De manier waarop een computer gegevens van en naar een andere computer of een ander apparaat ontvangt en verzendt.
Woordenlijst databits: Een parameter voor gegevenscommunicatie die het aantal bits bestuurt waaruit een byte bestaat. Als databits = 7, kan de computer 128 unieke tekens genereren. Als databits = 8, kan de computer 256 unieke tekens genereren. DC: Direct Current (gelijkstroom). Elektrische stroom die in één richting loopt. Dit type stroom wordt normaal gesproken door accu’s en batterijen geleverd.
Woordenlijst E echoën: Techniek waarbij ontvangen gegevens worden teruggezonden naar het apparaat van oorsprong. U kunt de informatie op het scherm weergeven, naar de printer sturen of beide. Wanneer een computer gegevens terugontvangt die het naar een CRT (of een ander randapparaat) heeft verzonden, en de gegevens vervolgens opnieuw verzendt naar de printer, wordt de CRT door de printer “geëchood”.
Woordenlijst gigabyte (GB): Een eenheid van gegevensopslag die gelijk is aan 1024 megabytes. Zie ook byte en megabyte. graphics: Informatie in de vorm van tekeningen, figuren of andere beelden, zoals diagrammen of grafieken. H hardware: De fysieke elektronische en mechanische onderdelen van een computersysteem: meestal de computer zelf, externe schijfstations enzovoort. Zie ook software en firmware. hertz: Een eenheid voor frequentie die overeenkomt met 1 cyclus per seconde.
Woordenlijst invoer: De gegevens of instructies die de gebruiker via het toetsenbord of een intern/extern gegevensopslagapparaat doorgeeft aan een computer, een communicatieapparaat of een ander randapparaat. De gegevens van de zendende computer (ofwel de uitvoer) zijn de invoer van de ontvangende computer. IrDA 1.1: Een industriestandaard voor gegevensoverdracht die voorziet in draadloze seriële infraroodtransmissie met een snelheid van maximaal 4 Mbps.
Woordenlijst M map: Een pictogram in Windows dat dient voor het opslaan van documenten of andere mappen. megabyte (MB): Een eenheid van gegevensopslag die gelijk is aan 1024 kilobytes. Zie ook byte en kilobyte. megahertz: Een eenheid voor frequentie die overeenkomt met 1 miljoen cyclussen per seconde. Zie ook hertz. menu: Een software-interface die een lijst van opties op het scherm toont. Ook wel scherm genoemd.
Woordenlijst O OCR: Optical Character Recognition ofwel optische tekenherkenning. Een techniek waarbij tekens door middel van lichtgevoelige apparatuur worden geïdentificeerd en in de computer worden ingevoerd. on line stand: De stand waarin een randapparaat gereed is voor het ontvangen of verzenden van gegevens. opdrachten: Instructies die u via het toetsenbord invoert om de acties van de computer of de randapparatuur te besturen.
Woordenlijst Power Saver: Een TOSHIBA-hulpprogramma waarmee u de parameters voor diverse energiebesparingsfuncties kunt instellen. printplaat (PCB of Printed Circuit Board): Een hardwareonderdeel van de processor waarop geïntegreerde schakelingen en andere onderdelen zijn bevestigd. De printplaat zelf is meestal plat en rechthoekig, en vervaardigd van glasvezel. programma: Een reeks instructies die een computer kan uitvoeren om een bepaald resultaat te bewerkstelligen. Zie ook toepassing.
Woordenlijst schijfstation: Een apparaat dat directe toegang heeft tot informatie op een schijf en deze naar het geheugen van de computer kopieert. Het apparaat schrijft ook gegevens uit het geheugen naar de schijf. Hiertoe draait het apparaat de schijf op hoge snelheid langs een lees-/schrijfkop. schrijfbeveiliging: Een methode om de gegevens op een diskette (floppy) te beschermen tegen abusievelijk wissen. SCSI: Small Computer System Interface.
Woordenlijst subpixel: De drie elementen, rood, groen en blauw (RGB), waaruit een pixel op een kleuren-LCD bestaat. De computer stelt subpixels apart in; elk subpixel kan een andere helderheid hebben. Zie ook pixel. synchroon: Met een constant tijdsinterval tussen opeenvolgende bits, tekens of gebeurtenissen. systeemschijf: Een schijf die is geformatteerd met een besturingssysteem. In het geval van MS-DOS bevindt het besturingssysteem zich in twee verborgen bestanden en het bestand COMMAND.COM.
Woordenlijst Universal Serial Bus: Via deze seriële interface kunt u communiceren met verschillende apparaten die in een keten op één computerpoort zijn aangesloten. V vaste schijf: Een niet-verwisselbare schijf die meestal met de letter C wordt aangeduid. Deze schijf wordt in de fabriek geïnstalleerd en kan alleen door een erkend monteur worden verwijderd. Ook wel harddisk genoemd. vasteschijfstation (HDD): Een elektromechanisch apparaat dat gegevens van een vaste schijf leest en ernaar schrijft.
Woordenlijst Woordenlijst-16 Gebruikershandleiding
Index A C Accu besparingsmodus, 1-13 capaciteit controleren, 6-9 gebruiksduur verlengen, 6-10 lampje, 2-12, 6-3 locatie, 2-7 opladen, 6-7 Real Time Clock, 1-5, 6-5 typen, 6-4 Accu-eenheid, 1-5, 2-7 extra, 8-10 vervangen, 6-11 Accuoplader, 1-18, 8-10 Advanced Port Replicator III Plus, 1-19, 8-16 ASCII-tekens, 5-9 CD-ROM, 2-4 CD-ROM-station, 1-6, 9-9 Computer opnieuw opstarten, 3-11 Computer schoonmaken, 4-30 Controlelijst van apparatuur, 1-1 B Beeldscherm automatisch uitschakelen, 1-12 controller, B-1 he
Index E Externe monitor, 1-9, 2-5, 8-11 Problemen, 9-19 F Fn + Ctrl (simulatie uitgebreid toetsenbord), 5-3 Fn + Enter, 5-3 Fn + Esc (geluid dempen), 5-3 Fn + F1 (directe beveiliging), 5-4 Fn + F10 (cursormodus), 5-3 Fn + F11 (numeriek modus), 5-3 Fn + F12 (ScrLock), 5-3 Fn + F2 (energiebesparingsmodus), 5-4 Fn + F3 (stand-by), 5-4 Fn + F4 (slaapstand), 5-4 Fn + F5 (beeldschermselectie), 5-5 Fn + F6 (helderheid van intern LCDscherm verlagen), 5-5 Fn + F7 (helderheid van intern LCDscherm verhogen), 5-5 Fn
Index LAN, 1-10, 4-28 aansluiten, 4-29 aansluitingslampje, 2-6 kabelsoorten, 4-28 LAN-actief-lampje, 2-6 ontkoppelen, 4-29 poort, 2-5 Problemen, 9-21 Luchtopeningen, 2-3 M Modem, 1-10, 4-21 aansluiten, 4-23 menu Eigenschappen, 4-22 ontkoppelen, 4-24 poort, 2-5 Problemen, 9-20 regioselectie, 4-21 N Netadapter, 1-5 aansluiten, 3-2 extra, 1-18, 8-10 O Onderhoud van diskettes, 4-20 Opstartprioriteit, 7-3 P PC-kaart, 1-9, 8-2 installeren, 8-2 locatie van sleuf, 2-3 verwijderen, 8-3 Poorten Docking, 1-9 exte
Index R RecordNow!, 1-16, 4-14 S Schakelaar voor draadloze communicatie, 1-12, 2-2, 4-27 SD-kaart, 1-9 behandeling, 8-5 formatteren, 8-4 installeren, 8-4 Problemen, 9-14 verwijderen, 8-5 Slaapstand, 1-14, 5-4 Slim Select Bay, 1-12 modules verwisselen, 4-3 Sneltoetsen, 1-12 beeldschermselectie, 5-5 directe beveiliging, 5-4 draadloze communicatie, 5-6 energiebesparingsmodus, 5-4 geluid dempen, 5-3 Helderheid van intern LCDscherm verhogen, 5-5 Helderheid van intern LCDscherm verlagen, 5-5 stand-by, 5-4 Softk
Index W wachtwoord computer opstarten met, 6-16 gebruiker, 6-13 Problemen, 9-7 Supervisor, 6-16 voor opstarten, 1-13 Warmteverspreiding, 1-14 Gebruikershandleiding Index-5
Index Index-6 Gebruikershandleiding