Operation Manual

Annex 5 - Configuring internet settings
136
Annex 5 - Configuring internet settings
5. In the Access point name: field, enter the
GPRS access point name (APN) for your
service provider, then tap Next.
6. In the User name: field, enter your user
name for the network, then tap Next.
7. In the Password: field, enter your password
for the network, then tap Next.
8. If you need to specify extra settings, tap one
or more of the following items and enter the
required information:
• Domain - enter the domain name, then tap
OK.
• IP Address - select Use server-assigned
IP address to automatically configure the
IP address. Otherwise, select Use specific
IP address and manually enter the IP
address.
Tap Next.
Tick the checkbox(es) for the required types
of compression, then tap OK.
• Server Address - to automatically
configure the server address, select Use
server-assigned addresses, then tap
Next.
Otherwise, select Use specific server
address to manually enter the server
address information in the Primary DNS:,
Secondary DNS:, Primary WINS:, and
Secondary WINS: fields.
Tap OK.
9. Authentication - select one of the
following:
• None - no authentication (default).
• CHAP - use Challenge Handshake
Authentication Protocol.
• PAP - use Password Authentication
Protocol.
10.In the ISP name: field, enter a name for the
GPRS connection.
11.Tap OK.