Operation Manual

Settings
86
Settings
Phone settings
Setting ring tones
To set a ring tone:
1. Access the Phone settings.
2. On the Phone tab, select the following:
•In the Ring type: field, select the required
type of tone. This can be ringing,
vibration, a combination of ringing and
vibration, or none.
•In the Ring tone: field, select the required
tone.
3. Tap the x/ok key or ok.
Setting keypad tones
To set keypad tones:
1. Access the Phone settings.
2. On the Phone tab, select the required type
of keypad tones in the Keypad: field. To
have no keypad tones, select Off.
Call Barring
Call Barring enables you to block certain
categories of incoming and outgoing calls (for
example, international calls).
To set up Call Barring:
1. Access the Phone settings.
2. Tap the Services tab.
3. In the list of services, tap Call Barring, then
tap the Get Settings... button. The settings
will then be read from the network.
TIP: Tap the play icon to listen to a sample
of the selected ring tone.
TIP: You can use custom sounds as ring
tones. You can copy the files to your
phone from your PC using ActiveSync, or
download them from the Internet.
TIP: You can also set the ring tone from
the Sounds & Notifications settings.
NOTE: Call Barring is only available if it is
supported by your service provider.
NOTE: Before setting up Call Barring,
you will need to obtain your call barring
password from your service provider.
n
n