Intelligent Image Sensor iIS-010 series TK6234A5 : iIS-010 TK6238A7 : iIS-011 TK6240A5 : iIS-012 Product Specification 1. Product Description ·································2 2. Features ···················································2 3. Configuration···········································4 4. Name and Function of Parts·····················6 5. Specification ············································9 6.
iIS-010 series product specification Ver. B (Oct. 12 2004) 1. Product Description "intelligent image sensor" iIS-010 series is an integrated image processing system consists of CCD camera head, control unit, and application software. iIS-010 series is a pre-packaged solution designed to simplify the deployment of machine vision in industrial applications. 2. Features (1) High measurement accuracy High measurement precision finds small defects in manufactured parts.
iIS-010 series product specification Ver. B (Oct. 12 2004) (8) Gauge Application Comprehensive set of gauging tools gives you the ability to precisely and accurately measure lines, angles between lines, ellipses and circles (center, circularity or out-of-round, nicks, major and minor axes),arcs (centers and lengths), Annuli, thread spacing ( wave tool ”),multiple measures of length and spacing of parts such as pins on an electrical connector (“rake tools ”),and other part measures.
iIS-010 series product specification Ver. B (Oct. 12 2004) 3.
iIS-010 series product specification Ver. B (Oct.
iIS-010 series product specification Ver. B (Oct. 12 2004) 4. Name and Function of Parts 2 1 3 4 ETHERNET DISPLAY POWER RS232C V+ VPOWER LED1 LED2 LED3 RDY 5 RESET CAMERA GPO3 STR GPO1 GPO2 COM1 GPO0 GPI3 D.TRIG TRIG SEL GPI1 GPI2 COM0 GPI0 7 010 8 6 Figure 1. Control unit (Front-panel side) 1. RJ45 connector for Ethernet Connect with PC or PLC by using Ethernet cable. 2.
iIS-010 series product specification Ver. B (Oct. 12 2004) 8. Parallel I/O 8 inputs and 7 outputs parallel I/O. Table 1. Parallel I/O terminal functions NAME COM0 GPI0 GPI1 GPI2 GPI3 SEL D.
iIS-010 series product specification Ver. B (Oct. 12 2004) 9 Figure 2. Control unit (top view) 9. Mounting kits for DIN rail You can mount with 32mm / 35mm width type DIN rail.
iIS-010 series product specification Ver. B (Oct. 12 2004) 5.
iIS-010 series product specification Ver. B (Oct. 12 2004) Relative Spectrum Response (*Including lens characteristics, Excluding light source characteristics) Sensitivity Wave Length(nm) Figure 3. Relative Spectrum Response [Control Unit] Camera input 1 Video output pixels 640 (H) × Quantization 10bit gray scale Processing 8bit gray scale Video format Non-Interlace Sensor Trigger mode Selectable Internal Timer or External trigger Exposure time Settable from 1 to 1024 (1 step = Approx.
iIS-010 series product specification Secondary WINS server Ver. B (Oct. 12 2004) Not Available (Default) Interfaces Ethernet 1ch Connector RJ-45 Table 2. Ethernet connector pin assignment Pin # I/O Teminal function 1 O TD+ (Transmit data +) 2 O TD- (Transmit data -) 3 I RD+ (Receive data +) 4 NC 5 NC 6 I RD- (Transmit data -) 7 NC 8 NC Connection Type 10/100 BaseT Ethernet IEEE 802.
iIS-010 series product specification Ver. B (Oct. 12 2004) for sync on green, 1.0 VP-P (75 Ω terminated) (Video signal: 0.7 VP-P, sync signal: 0.3 VP-P) Sync signal Separate sync Horizontal sync frequency 56.4kHz Vertical sync frequency 70Hz Image resolution 1024 × 768 × 16bpp Sampling resolving power R=5bit, G=6bit, B=5bit RS-232C 1ch Connector Pin # 1 2 3 4 5 D-SUB 9pin, Male I/O I O - Table 4.
iIS-010 series product specification Ver. B (Oct. 12 2004) Rated input voltage 25V (1ch) Input voltage range 0V to 25V Input voltage level ON: 5V to 25V OFF: 0.8V or less Input current level ON: 5mA to 20mA OFF: 1.9mA or less Control signal inputs 3ch TRIG Inspection Trigger input D.TRIG Decision Trigger input SEL Change Solution input Polarity Positive Minimum pulse width 200µs Select Solution Inputs 4ch Table 5.
iIS-010 series product specification Ver. B (Oct. 12 2004) IOPWR BOARD 220Ω Ferrite B All other Output Ferrite A COM1 PS2805 (NEC) 1000pF/50V Signal Ground 0.
iIS-010 series product specification Ver. B (Oct. 12 2004) [Example Installation] PC / PLC PC or LAN TX TX RX RX LOCAL DISPLAY TX TX RX RX RS-232C ETHERNET DC Power Supply 24V DC +/- 10% 1A or more CAMERA External Control Devices *The length of the power line between the control unit and DC power supply must be less than 10m, and use twisted-pair wire. [Client PC system requirements] Operating System Microsoft® Windows® NT 4.
iIS-010 series product specification Ver. B (Oct. 12 2004) [Software function specification - on Internet Explorer (Ver.1.2.0.
Ver. B (Oct. 12 2004) iIS-010 series product specification Password Protection For preventing others from changing your Solution [Software Function Specification: Gauge/Label in common specifications (Ver.1.2.0.
Ver. B (Oct. 12 2004) iIS-010 series product specification Conditional output Selectable Disable or Enable if (Condition) Create / Edit Condition Then (Send) Add / Edit Output string To (Destination) Add / Edit Destination Serial (COM3) port settings Bit rate Selectable 110 / 300 / 600 / 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200bps *230400 / 460800 / 921600bps are not supported.
Ver. B (Oct.
Ver. B (Oct.
Ver. B (Oct. 12 2004) iIS-010 series product specification Reset Product line and Statistics History Log Recent 8 images and data of Pass / Recycle / Reject Saving current parts image Windows® Bitmap Image Display Image and Data / Data only / Nothing [Software Function Specifications: iWorks Label (Ver.1.2.0.
Ver. B (Oct. 12 2004) iIS-010 series product specification 6.
Ver. B (Oct.
Ver. B (Oct.
Ver. B (Oct.
Ver. B (Oct. 12 2004) iIS-010 series product specification • Restriction For Use • Should the equipment be used in the following conditions or environments, give consideration to safety measures and inform us of such usage: 1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors. 2. Use of the equipment in applications expected to cause potential hazard to people or property, which require special safety measures to be adopted.
Ver. B (Oct. 12 2004) iIS-010 series product specification • Precautions • The contents of this manual may not be reproduced in whole or in part without prior written consent from TELI (Tokyo Electronic Industry Co., Ltd.). • The contents of this manual may be revised without notice to reflect future product modifications.
Ver. B (Oct. 12 2004) iIS-010 series product specification transportation facilities and equipment, or any other application, facility, or equipment that requires extreme reliability. TELI assumes no responsibility or liability for injury, fire, or consequential damages arising from failure of the CCD camera in such applications. • Expenses we bear on this product shall be limited to the individual price of the product.
Head Office: 7-1, 4 chome, Asahigaoka, Hino-shi, Tokyo, 191-0065, Japan (Overseas Sales Department) Phone: +81-42-589-8771 Fax: +81-42-589-8774 URL: http://www.toshiba-teli.co.