Operations Preparations TLP-XD2000 Maintenance Before Using 3LCD DATA PROJECTOR Others OWNER’S MANUAL
Before Using The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This unit is fully transistorized and does not contain any parts that can be repaired by the user. 5. Heat 8. Power-Cord Protection The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
10. Lightning storms 12. Do not place the product vertically For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. However, while it is thundering or lightning, do not touch the apparatus and any connected cable and/or equipment. This will prevent you from receiving the electric shock by an electric surge.
19. Replacement Parts 22. Do not use the product in a closed installation state. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only should be made by users.) Do not place the product in a box or in any other closed installation state. Otherwise it may overheat.
Avoid Volatile Liquid Disposal Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will leave marks on the finish. If cleaning with a chemically saturated cloth, be sure to follow the product's precautions. This product contains substances which are harmful to humans and the environment. • The lamp contains mercury. Please dispose of this product or used lamps in accordance with local regulations.
Before Using Others SAFETY PRECAUTIONS .................................................................................. IMPORTANT SAFETY INSTRUCTIONS ........................................................... POWER SUPPLY CORD SELECTION .............................................................. IMPORTANT PRECAUTIONS ........................................................................... EXEMPTION CLAUSES ....................................................................................
Preparations Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. If any item is missing, please contact the store immediately where you purchased the product.
Names of each part on the control panel and remote control Remote Control (9) (5) (10) (12) (4) (6) (11) (2) (3) (11) (12) (13) (14) Name AUTO SET button MUTE button FREEZE button Ten-Key button (7) (1) (8) (8) (1) (2) (17) (17) (15) (16) (13) (14) (15) PICTURE button (16) SCREEN SIZE button (17) RESIZE button : : : : : Main Function Sets up input from computer. p.27 Cuts off the picture and sound temporarily. p.29 Pauses image. p.30 Use when entering password.
Names of the terminals on the rear panel (1) (2) (3) (4) (6) (8) (9) Preparing and using the remote control ■ Loading dry-cell batteries into the remote control ■ Operating the remote control q Remove the battery cover. Point toward the projector’s infrared remote sensor, and press a button on the remote control. • Operating the projector from the front w Insert the dry-cell batteries. Be sure to align the plus and minus ends of the batteries properly.
Placement Connection Placement Styles Before connection As shown in the figures below, this device can be placed in 4 different styles. The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the Default setting 2 menu, in accordance with your needs. p.41 • Read the owner’s manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.51 , etc.
Operations Turning the power on and off Connection (Continued) Notes • When COMPUTER 2 IN terminal (also used for MONITOR OUT terminal) is used as MONITOR OUT terminal, the signal which is input to COMPUTER 1 IN terminal is output. • Signals are output from MONITOR OUT terminal even in standby mode. However, from AUDIO OUT terminal, no audio signal is output. • A computer monitor cannot accept Y/PB/PR signals correctly.
Turning the power on and off (Continued) Basic operations 1 Turn on the power. Turn on the power by following the instructions in “Turning the power on” p.23 . 2 Select the language and the lamp power (When using the first time). When the projector is used for the first time after purchase, the start menu for language (to display the menus and messages on the screen) and lamp power selection and configuration is displayed in English. (If the screen is out of focus, adjust it according to the step 6 .
Basic operation (Continued) Using handy features 5 Projector placement angle adjustments ■ Using auto setting (Only for input from computer) The placement angle and the height of the projected image can be adjusted by the foot adjuster. q Lift up the front of the projector to the desired angle, then press the foot adjuster release button. Remote Control Press the remote control’s AUTO SET button. For computer input, the icon will appear during processing.
Using handy features (Continued) Notes Adjusting Keystone distortion [Auto] 2 Press the button. The keystone distortion is automatically corrected. The icon appears during this correction. When adjustment is finished, the Keystone menu appears again. For fine adjustment, select [V-keystone] by the button and adjust image manually by the buttons. buttons for keystone adjustment. Remote Control Press the remote control’s MUTE button.
Using handy features (Continued) ■ Changing screen size ■ Setting the password The screen size for the projected image can be changed. Press the remote control’s SCREEN SIZE button. Remote Control How to change password The default password is 0000. 1 Select [Password] in the Default setting 2 menu and press the Pressing the button switches Full/Thru/Wide in turn. or button.
Using handy features (Continued) How to set password (from [Off] to [On]) 1 Select [Password] in the Default setting 2 menu and press the How to set password (from [On] to [Off]) or button. or button. 2 Select [Password setting] in the password registration, setting menu, and press the 1 Select [Password] in the Default setting 2 menu and press the or button. 3 Select [Password setting] in the password registration, setting menu, 3 Select [On].
Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using the operation buttons p.16 on the control panel (main unit side) and remote control. ■ How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button 2. Select a Category Select a category by using Image adjustment menu p.35 Default setting 1 menu p.40 Default setting 2 menu p.41 Status display menu p.
Using the menus (Continued) Position Description Computer Y/PB/PR Video S-video V-position Adjust the vertical position of the image. Yes No No No Clamp 1 Adjusts the clamp pulse position. Yes No No No Clamp 2 Adjusts the clamp pulse width. Yes No No No *1: [Noise reduction] may not work depending on signal type. *2: [[NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese.
Using the menus (Continued) Notes [Up/down shift] Shifts the projected image vertically when [Screen size] is [Wide]. [Blackboard mode] Projects the image in colors more like projecting on a screen. Precaution • The projected image may differ depending on the type, color, and material of the blackboard and wall even if the selected color is the same as the projected screen. [Background] • TOSHIBA is set for [Logo] by factory setting.
Using the menus (Continued) ■ The default setting menu Default setting 2 menu Item Default setting 1 menu Item Description No signal power off Set the time to wait for the power to be turned off after the last operation is made with no input signal. Off (not turned off) 30 min. Auto input search Set whether the input with signals is only selected or not. On Off Beep Beep when operation is made.
Maintenance Using the menus (Continued) About lamp ■ Displaying Information (Status display) The product’s light source is a mercury lamp that lights at increased internal pressure. Be sure to fully understand the following characteristics of the lamp and handle it with extreme care. • The lamp may burst with a loud noise due to impact or deterioration, or fail to light at the expiration of its life. • How long it takes before the lamp bursts or the life expires may vary greatly by lamp.
Lamp replacement A lamp is consumable supplies. If used for extended periods, images will appear dark, and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime of the lamp depends on condition of use.) If this happens, replace it with a new one. WARNING • If the projector is mounted on the ceiling, it is recommended to use your Toshiba dealership when the lamp has to be exchanged.
Air filter cleaning Lens and main unit cleaning The air filter prevents dust and debris from getting inside the projector. Never run the projector with the filter removed. It is recommended that the air filter is cleaned regularly. • The message “Check the air filter for dirt.” is displayed every 100 hours. (If the usage time exceeds 100 hours, this message is displayed for about 30 seconds when the image is displayed for the first time after power is turned on.
Others Trouble indications Before calling service personnel The indicator lights to inform you of internal abnormalities. If you think something is wrong, check the followings before contacting customer service. Please see “Trouble indications” p.48 as well. (Off) Problem with projector • Unplug the power cord, and contact your dealer. If This Happens • Is the power cord plugged in? Is it connected to the projector? • Is the lamp cover attached properly? p.
Specifications ■ List of general specifications Connection terminal Item Consumption Power Weight External Dimensions (including protruding parts) Cabinet material Conditions for usage environment Display method Panel size LCD Panel Drive system Picture elements Lens Lamp Projection screen size Projection distance Speaker COMPUTER 1 IN terminal COMPUTER 2 IN terminal S-VIDEO terminal AUDIO (L/R) terminal VIDEO terminal AUDIO IN terminal AUDIO OUT terminal CONTROL terminal ■ List of supported signals (RGB
Specifications (Continued) ■ CONTROL terminal Signal format fh(kHz) fv(Hz) 480i(525i)@60Hz 480p(525p)@60Hz 576i(625i)@50Hz 576p(625p)@50Hz 720p(750p)@60Hz 720p(750p)@50Hz 15.73 31.47 15.63 31.25 45.00 37.50 59.94 59.94 50.00 50.00 60.00 50.00 1080i(1125i)@60Hz 1080i(1125i)@50Hz 33.75 28.13 60.00 50.00 ■ List of supported signals (Video, S-Video signals) ● Pin assignment 6 8 5 3 4 2 fh(kHz) fv(Hz) fsc(MHz) 15.73 15.63 15.63 60 50 50 3.58 4.43 4.25 or 4.41 PAL-M PAL-N 15.73 15.
