LCD DATA PROJECTOR Owner's Manual TLP450U TLP451U TLP650U TLP651U TLP650A TLP651A TLP470U TLP471U TLP670U TLP671U

CONTENTS
32
Adjustments
Picture adjustments
– Picture
1
3
2
Press or to select a
preferred item.
Press or to adjust the item.
To select another item, go back to step 3.
:
+ :
Contrast : () Lower
(+) Higher
Brightness
:() Darker
(+) Brighter
Color: () Duller
(+) Brighter
Tint: () Redder
(+) Greener
Sharpness: () Softer
(+) Sharper
R-level: () To reduce red
(+) To increase red
G-level: () To reduce green
(+) To increase green
B-level: () To reduce blue
(+) To increase blue
Preparation
Display the image as explained in Picture
Projection.
21
Set the POINTER/PJ selector to PJ.
Press MENU to display the
menu.
Press or to select .
4
Camera gain: (For document imaging
camera model only)
() To lower the camera
sensitivity when the
subject is too bright.
(+) To raise the camera
sensitivity when the
subject is too dark.
Press MENU.
The menu disappears.
Notes
The adjustment can be stored on each input
source (RGB, Video, Camera).
Some item may be displayed in gray
depending on an input source. The item
displayed in gray cannot be adjusted and/or
set.
These adjustments are stored until you turn
the power off.
To store the adjustments even if the power is
turned off, follow the procedure of Saving
data.
34
Pressing RESET will return the adjustment or
setting currently selected to default.
5
AUTO SET
POINTER
PJ
MARKER
LASER
MENU ENTER
KEYSTONE
ON/STANDBY
R-CLICKL-CLICK
VIDEO CAMERARGB
RESET FREEZERESIZE
RESET
ON/STANDBY MENU ENTER
SELECT/ADJUST
INPUT
ON
LAMP
TEMP
1,5
2-4
Con t r as t
Picture
+
Brightness
Color
+
+
Tint
Sharpness
+
+
R- level
+
G- l evel
+
B- leve l
+
Camera gain
+