Portégé® Z10-A Series User’s Guide If you need assistance: Technical support is available online at Toshiba’s Web site at support.toshiba.com. At this Web site, you will find answers for many commonly asked technical questions plus many downloadable software drivers, BIOS updates, and other downloads. For more information, see “If Something Goes Wrong” on page 105 in this guide.
Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. For the state of California only. Model: Portégé® Z10-A Series Recordable and/or ReWritable Drive(s) and Associated Software Warranty The device system you purchased may include Recordable and/or ReWritable optical disc drive(s) and associated software, among the most advanced data storage technologies available.
Protection of Stored Data For your important data, please make periodic back-up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM.
FCC Notice “Declaration of Conformity Information” This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
Bluetooth® Wireless Technology Interoperability Bluetooth® Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ ❖ Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group. Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special Interest Group.
Bluetooth® Wireless Technology and Your Health The products with Bluetooth® wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is much less than the electromagnetic energy emitted by wireless devices such as mobile phones.
Wireless Interoperability Wireless LAN products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖ The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined and approved by the Institute of Electrical and Electronics Engineers. ❖ The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.
Wireless LAN and Your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers.
Canada – Industry Canada (IC) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada. This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Veuillez noter que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.
The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive Information The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive is intended to protect the quality of the environment and human health through the responsible use of natural resources and the adoption of waste management strategies that focus on recycling and reuse.
Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ Belgique: Deutschland: France: Italia: Nederland: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m. For registration and license please contact IBPT/BIPT.
Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community 5150-5250 Countries MHz Austria Belgium, France, Switzerland/ Liechtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK Iceland, Spain O: allowed 5250-5350 MHz 5470-5725 MHz Channels: 36, 40, 44, 48 Channels: 52, 56, 60, 64 Indoor Only Indoor Only Channels: 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 O O x O Indoor/Outdoor
The Access Point’s radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.
2. Indication The indication shown below appears on this equipment. (2) (3) (1) 2.4DSOF4 (4) 1 2 2.4: This equipment uses a frequency of 2.4 GHz. DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. 3 The interference range of this equipment is less than 40m. 4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. The indication shown below appears on this equipment.
Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan. Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved.
Trademarks Portégé, Accupoint, and eco Utility are either registered trademarks or trademarks of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners. U.S.
Device Recycling Information As part of a commitment to people and the future, Toshiba promotes the efficient use of resources by working to achieve our zero-wasteto-landfill goal at all our production sites. In addition to our existing waste reduction and recycling policies, Toshiba is strongly committed to reducing electronic waste.
Contents Chapter 1: Introduction...........................................24 This guide ............................................................ 26 Safety icons ......................................................... 27 Other icons used............................................ 27 Your device’s features and specifications ..... 28 Documentation .................................................... 28 Service options .................................................... 28 Chapter 2: Getting Started.
Contents Recovering the Internal Storage Drive ................. 37 Creating recovery media................................ 38 Restoring from recovery media...................... 41 Refresh your PC (with user’s data) ................ 42 Reset your PC ................................................ 44 Installing drivers and applications.................. 47 Using the TOSHIBA Dual Pointing Device ........... 48 Using the touch pad ...................................... 49 Adjusting touch pad settings ..
Contents 21 Starting an app .................................................... 64 Starting an app from the Start screen ........... 64 Saving your work ................................................. 65 Backing up your work .......................................... 65 Toshiba’s online resources .................................. 66 Chapter 4: Mobile Computing ................................67 Toshiba’s energy-saver design............................ 67 Running the device on battery power...........
Contents Recording sounds.......................................... 86 Using external speakers or headphones ....... 87 Using the Web Camera........................................ 88 Using the Memory card reader ............................ 88 Inserting memory media ................................ 89 Removing memory media .............................. 89 Chapter 6: Utilities.................................................. 91 eco Utility® ..........................................................
Contents 23 Wireless networking problems........................... 120 Develop good computing habits........................ 122 Data and system configuration backup in the Windows® operating system ............ 123 If you need further assistance............................ 127 Contacting Toshiba...................................... 127 Other Toshiba Internet Web sites ...................... 127 Toshiba’s worldwide offices .............................. 128 Appendix A: TOSHIBA Function Keys ...........
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba device, your work and entertainment can accompany you wherever you go. Your computer is ENERGY STAR® qualified. Toshiba is a partner in the Environmental Protection Agency’s (EPA) ENERGY STAR® Program and has designed this computer to meet the latest ENERGY STAR® guidelines for energy efficiency.
Introduction 25 When considering additions to your home office, purchase products that have earned the ENERGY STAR® for all your equipment needs, which can save you money, save energy, and help protect the climate. Visit http://www.energystar.gov or http://www.energystar.gov/powermanagement for more information regarding the ENERGY STAR® Program.
Introduction This guide NOTE The product specifications and configuration information are designed for a product Series. Your particular model may not have all the features and specifications listed or illustrated. For more detailed information about the features and specifications on your particular model, please visit Toshiba’s Web site at support.toshiba.com.
Introduction Safety icons 27 Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Introduction Documentation Your device’s features and specifications Certain device chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the device chassis, unless you have selected all those features. This information applies to all the features and icons described in this guide.
Chapter 1 Getting Started This chapter provides tips for using your device effectively, summarizes how to connect components, and explains what to do the first time you use your device. Please read the safety instruction information on the Quick Start document (that shipped with your device) carefully and make sure you fully understand the instructions before you attempt to use your device in order to avoid potential hazards that could cause bodily injury, property damage, or damage the device.
Getting Started Connecting to a power source To use external power or to charge the battery you must attach the AC adaptor. See “Connecting to a power source” on page 30. NOTE Please handle your device carefully to avoid scratching or damaging the surface. Connecting to a power source Your device requires power to operate. Use the power cord/cable and AC adaptor to connect the device to a live electrical outlet, or to charge the device’s battery.
Getting Started Connecting to a power source 31 AC adaptor Power cord/cable AC adaptor cord (Sample Illustration) Power cord/cable and AC adaptor To connect AC power to the device: 1 Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
Getting Started Charging the main battery 3 Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows white. Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury.
Getting Started Using the device for the first time 33 Using the device for the first time The device is now ready for you to turn it on and begin using it, see “Exploring Your Device’s Features” on page 80. NOTE When opening or closing the display panel, place one hand on the palm rest to hold the device in place and use the other hand to slowly open or close the display panel.
Getting Started Registering your device with Toshiba NOTE The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices. The first time you turn on your device, the setup guides you through steps to set up your software. Follow the on-screen instructions.
Getting Started To Restart your device 35 Pressing the power button before shutting down the Windows® operating system could cause you to lose your work. Make sure the system indicator panel’s storage drive light and the drive in-use light are off. If you turn off the power while a disk/disc is being accessed, you may lose data or damage the disk/disc and/or drive. 3 In the lower right of the screen click or touch the Power ( ) icon.
Getting Started To place your device in Sleep mode 4 Highlight Restart, and then click or touch the Restart option. The device closes all open applications, and restarts the operating system. To place your device in Sleep mode 1 From the Start or Desktop screen, move your pointer to the upper-right corner of the screen or swipe in from the right edge. 2 When the Windows® charms appear, click or touch the Settings ( ) charm.
Getting Started Adding optional external devices 37 Adding optional external devices NOTE Before adding external devices, Toshiba recommends setting up your software. See “Setting up your software” on page 33.
Getting Started Recovering the Internal Storage Drive A recovery image of your device is stored on the internal storage drive, and the image can be restored by running the recovery utilities directly from your internal storage drive as described in the sections below. However, it is strongly recommended that you create recovery media. If the recovery files on your internal storage drive become corrupted or are deleted, you can restore your system from your recovery media.
Getting Started Recovering the Internal Storage Drive 39 NOTE During the recovery process your device must be connected to an external power source via the AC adaptor. NOTE When you create recovery media, only the operating system files, applications, and drivers originally shipped with the device are backed up to the external media and can be restored from this media. Any files that you created are not backed up on the recovery media.
Getting Started Recovering the Internal Storage Drive The TOSHIBA Recovery Media Creator dialog box displays. (Sample Image) TOSHIBA Recovery Media Creator dialog box 2 Select DVD or USB Flash from the drop-down list, depending on the type of external media you want to use. 3 Check the “Information” area of the dialog box to determine the number of DVDs you will need and/or the minimum amount of storage space required for copying your system’s recovery files to USB flash drive(s).
Getting Started Recovering the Internal Storage Drive NOTE 41 If you are copying the recovery files to DVDs, be sure to label each DVD in the set sequentially (for example, “1 of 3,” “2 of 3,” etc.), so that you will know in which order to insert the discs during recovery. For information on using the Recovery media you have created with the preceding steps, see “Restoring from recovery media” on page 41.
Getting Started Recovering the Internal Storage Drive 3 ❖ If your recovery files are on a USB flash drive, connect the USB flash drive to your device. Turn on your device while pressing the F12 key on your keyboard. The Boot menu displays. 4 Using the arrow keys, select the DVD option or the USB Flash option, depending on which type of media you are using, and then press the ENTER key.
Getting Started Recovering the Internal Storage Drive 43 1 From the Start or Desktop screen, move your pointer to the upper-right corner of the screen or swipe in from the right edge. 2 When the Windows® charms appear click or touch the Settings ( ) charm. 3 Click or touch Change PC Settings. The PC settings window appears. (Sample Image) PC settings screen 4 Click or touch General. 5 Scroll down to “Refresh your PC without affecting your files,” and click or touch Get Started.
Getting Started Recovering the Internal Storage Drive Toshiba does not guarantee successful data back up. Be sure to save your work to external media before executing the recovery (see “Backing up your work” on page 65). 6 Click or touch the Next button to begin. The “Ready to refresh your PC” screen appears. (Sample Image) Ready to refresh your PC screen You will be prompted to refresh your system. 7 Click or touch the Refresh button. 8 Your system will restart.
Getting Started Recovering the Internal Storage Drive 45 1 From the Start or Desktop screen, move your pointer to the upper-right corner of the screen or swipe in from the right edge. 2 When the Windows® charms appear click or touch the Settings ( ) charm. 3 Click or touch Change PC Settings. The PC settings window appears. (Sample Image) PC settings screen 4 Click or touch General. 5 Scroll down to “Remove everything and reinstall Windows,” and click or touch Get Started.
Getting Started Recovering the Internal Storage Drive 6 Click or touch the Next button. The “Do you want to fully clean your drive?” screen appears. (Sample Image) Do you want to fully clean your drive screen 7 Select one of the following options: ❖ Just remove my files ❖ Fully clean the drive The “Ready to reset your PC” screen appears. (Sample Image) Ready to reset your PC screen 8 Click or touch the Reset button. The “Resetting your PC” window appears.
Getting Started Recovering the Internal Storage Drive NOTE 47 Selecting the “Fully clean the drive” option may take several hours. Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your device. To reinstall drivers and applications: 1 From the Start screen begin typing TOSHIBA Application Installer and click or touch your selection.
Getting Started Using the TOSHIBA Dual Pointing Device Using the TOSHIBA Dual Pointing Device AccuPoint® II pointing device AccuPoint® II primary button AccuPoint® II secondary button Touch pad Touch pad primary button Touch pad secondary button (Sample Illustration) TOSHIBA Dual Pointing Device buttons AccuPoint® II pointing device—Moves the cursor and selects items on the screen. To move the cursor, gently push the pointing device in the direction you want the cursor to move.
Getting Started Using the TOSHIBA Dual Pointing Device Using the touch pad NOTE Some of the touch pad operations described in this section are only supported in certain applications, and only on certain models. NOTE The touch pad driver is pre-installed on your device. If this driver is removed, the touch pad and touch pad buttons will not work. You will need to reinstall the touch pad driver using the TOSHIBA Application Installer.
Getting Started Using the TOSHIBA Dual Pointing Device Refer to the table below for specific instructions on performing each operation. NOTE The pointer is the icon (usually an arrow) that moves on the screen when you slide your finger across the touch pad or move a mouse connected to your device. To: Do the following: Move the onscreen pointer Slide your finger across the touch pad in the direction you want to move the pointer.
Getting Started Using the TOSHIBA Dual Pointing Device To: Do the following: Right-click an item 1 Move the pointer to the item you want to right-click. 2 Press and release the secondary control button. This feature varies by program. Check your program documentation for specific instructions on right-clicking. Scroll vertically Slide two fingers along the right edge of the touch pad in the direction you want to scroll. Repeat to scroll a longer distance.
Getting Started Connecting an external device Adjusting touch pad settings While you are typing, the on-screen pointer may seem to move or jump around “by itself” to random locations on the screen. The on-screen pointer may also seem to automatically select text, click buttons, and activate other user interface elements. For help with these problems, try one or more of the following: ❖ Try adjusting your typing technique to avoid accidental contact with the touch pad.
Getting Started Using external display devices 53 2 Connect the external device’s video or USB cable to the port on your device and to the external device. 3 Connect the external device’s power cable to a live electrical outlet (if applicable). 4 Turn on the external device (if applicable). Your device may automatically detect the external device.
Getting Started Using external display devices the cable to your television or display device. Refer to the manual that came with the television or display device for more information. Your device should automatically detect the external display device. Connecting an external monitor or projector You can easily attach an external monitor or projector to your device if you need a larger screen.
Getting Started Using external display devices 55 This cycles through the settings in the following order (the last two options are available if an external monitor is connected): ❖ PC screen only ❖ Duplicate ❖ Extend ❖ Second screen only (Sample Image) Display options window NOTE The ( ) + P keys navigate through the options without activating a selection. Press ENTER to activate a selection. NOTE You may also use Fn+F5, and then press ENTER to activate a selection.
Getting Started Customizing your device’s settings 3 Select Second screen ( ). (Sample Image) Display options window 4 Select the desired display setting. Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.
Getting Started Caring for your device 57 Caring for your device This section gives tips on cleaning and moving your device. For information about taking care of your device’s battery, see “Taking care of your battery” on page 77. NOTE Please handle your device carefully to avoid scratching or damaging the surface. Cleaning the device Keep liquids, including cleaning fluid, out of the device’s keyboard, speaker, and other openings. Never spray cleaner directly onto the device and/or display.
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the device’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your device to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Learning the Basics Computing tips ❖ 59 Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy. For more information, see “Data and system configuration backup in the Windows® operating system” on page 123.
Learning the Basics Attaching and detaching the keyboard Attaching and detaching the keyboard To attach the keyboard: ❖ Align the guides on the keyboard bracket to the guide points at the bottom edge of the tablet and gently press the tablet straight down into the bracket until it clicks in place. When the keyboard is properly attached, the Windows® button is at the center of the bracket.
Learning the Basics Using the keyboard 61 Using the keyboard Your device’s keyboard dock contains character keys, control keys, function keys, and special Windows® keys. (Sample Illustration) Keyboard Function keys The function keys (not to be confused with the Fn key) are the 12 keys at the top of the keyboard. (Sample Illustration) Function keys F1 through F12 are called function keys because they execute programmed functions when pressed.
Learning the Basics Backlit keyboard dock ❖ Application key—Has a similar function as the secondary mouse button Backlit keyboard dock Your keyboard may have a backlight illumination feature. If the keyboard backlight setting is set to Auto, the backlight turns on when you type on the keyboard and turns off after a certain interval when you stop typing. You can modify the time-out interval or change the keyboard backlight setting to always on or always off.
Learning the Basics Mouse properties 63 Drag—Touch and hold an item for a moment and then, without lifting your finger, move the item until you reach the target position. For example, drag items on any app screen to reposition them. Swipe or slide—To swipe or slide, quickly move your finger across the surface of the screen without pausing. For example, swipe your finger to the left from the right edge of the screen to display the Windows® charms. Double-tap—Tap quickly twice to zoom in.
Learning the Basics Starting an app ❖ Pointer Options ❖ Wheel ❖ Hardware ❖ Device Settings You may see additional categories depending on your particular pointing device. 2 Adjust the settings as desired, and then click or touch OK. Starting an app To Start an app on the Start screen, move your pointer over the appropriate tile and click or touch to open. To Start an app from the Desktop, move your pointer to the upper-right corner of the screen or swipe in from the right edge.
Learning the Basics Saving your work 65 Below is an example using the Search field to start an app: 1 Move your pointer to the upper-right corner of the screen or swipe in from the right edge. When the Windows® charms appear click or touch the Search ( ) charm. (Sample Image) Searching for apps 2 Start typing the app’s name in the Search field. As you type, all matching files and apps are displayed. 3 Click or touch the app you wish to open.
Learning the Basics Toshiba’s online resources HINT: Backing up all the files on your internal storage drive may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a highcapacity file recovery system, such as an external hard drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Chapter 3 Mobile Computing This chapter covers all aspects of using your device while traveling. Toshiba’s energy-saver design Your device enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba.
Mobile Computing Running the device on battery power Battery Notice Battery life rating is for comparison purposes only, and does not indicate the battery life that will be obtained by any individual user. Actual battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the design of individual components.
Mobile Computing Charging batteries 69 The RTC battery powers the RTC memory that stores your system configuration settings and the current time and date information. It maintains this information for up to a month while the device is turned off. TECHNICAL NOTE: Depending on your system, the RTC battery may only charge while the device is turned on.
Mobile Computing Charging batteries TECHNICAL NOTE: The recharging of the battery may not occur when your device is using all of the power provided by the AC adaptor to run applications, features, and devices. Your device's Power Options utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge. The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold.
Mobile Computing Monitoring battery power NOTE 71 Depending on your system, the RTC battery may only charge while the device is turned on. To recharge the RTC battery, plug the device into a live electrical outlet and leave the device powered on for 24 hours. NOTE It is seldom necessary to charge the RTC battery because it charges while the device is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working.
Mobile Computing Monitoring battery power HINT: Be careful not to confuse the battery light ( power light ( ), and the power button light. ), the When the power light or power button light flashes amber, it indicates that the system is suspended (using the Windows® operating system Sleep command).
Mobile Computing Monitoring battery power 73 TECHNICAL NOTE: The device drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The device calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Mobile Computing Monitoring battery power 5 Double-click or touch Battery to display the battery options. (Sample Image) Advanced settings tab of Power Options screen 6 Configure the alarm settings to suit your needs.
Mobile Computing Monitoring battery power 75 These power-saving options control the way in which the device is configured. By using them, you can increase the length of time you can use the device before you need to recharge the battery. Microsoft® has combined these options into preset Power Plans. Using one of these power plans lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Mobile Computing Using the eco power plan NOTE 5 To edit a plan or to edit advanced settings, continue to the following steps. Click or touch Change plan settings to choose the plan you want to edit. This screen allows you to change basic settings. 6 Click or touch Change advanced power settings to access settings for battery notification levels, internal storage drive power save time, etc.
Mobile Computing Changing the main battery 77 Changing the main battery When your main battery has run out of power, plug in the AC adaptor. If you find that a new battery is needed, contact the location where you purchased the device for more information on replacing the battery. Toshiba will not be responsible for any product damage, data loss, service, or part replacement made necessary by improper installation of a new battery.
Mobile Computing Disposing of your device Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter. To fully discharge your battery pack: ❖ Periodically, disconnect the device from a power source and operate it on battery power until the battery pack fully discharges. Disposing of your device Never attempt to dispose of a computer by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven).
Mobile Computing Traveling tips 79 TECHNICAL NOTE: When traveling by air, you may be required to pass your device through airport security equipment. The X-ray equipment will not harm your device. NOTE Before using your device aboard an aircraft, make sure the Wireless antenna is OFF (Airplane mode is ON) if your device has wireless LAN capability. NOTE To enable or disable wireless communication, use the F12 key. For more information see “TOSHIBA Function Keys” on page 129.
Chapter 4 Exploring Your Device’s Features In this chapter, you will explore some of the special features of your device. Exploring the Start screen The Start screen is the launching pad for everything you can do in the Windows® operating system, providing new and easy ways to access everything from your favorite apps and Web sites to your contacts and other important information.
Exploring Your Device’s Features Exploring the Start screen 81 For detailed information on the new Windows 8 functionality, refer to the Windows® Help and Support. App tiles (Sample Image) Windows® Start screen Charms Use the Windows® charms to start apps, find documents, set up system components, and perform most other computing tasks.
Exploring Your Device’s Features Exploring the desktop Tiles Tiles can be accessed and launched from the Start screen. Typical Start screen tiles are the Desktop tile and Mail tile, as well as tiles representing all other applications downloaded to your system. Exploring the desktop You can use its features to start applications, find documents, set up system components, and perform most other computing tasks.
Exploring Your Device’s Features Exploring the desktop 83 Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking or touching the icon. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area. You may see various icons displayed on your system desktop, for example: Recycle Bin—Holds files you have deleted.
Exploring Your Device’s Features Windows® Store Notification area The notification area displays icons of tasks or programs that run continuously in the background and displays notifications. To learn more about each task, position the pointer over the icon for a few moments and a short description of the task appears. Typical tasks in the notification area are Current time, Power usage mode, network connectivity status, and speaker volume.
Exploring Your Device’s Features Setting up for communications 85 Setting up for communications To connect to the Internet you need: ❖ A browser or communications program ❖ An Internet Service Provider (ISP) or online service if you plan to use the Internet ❖ A way to connect to the ISP (for example Wi-Fi®/broadband connection, etc.) Connect to the Internet NOTE Wireless connectivity and some features may require you to purchase additional software, external hardware or services.
Exploring Your Device’s Features Exploring audio features Connecting your device to a network You can connect your device to a network to increase its capabilities and functionality. Accessing a network For specific information about connecting to the network, consult your network administrator. Many hotels, airports, and offices offer Wi-Fi® access.
Exploring Your Device’s Features Exploring audio features 5 87 When you have finished recording, click or touch the Stop Recording button. The Save As dialog box appears. 6 To save the file, type a file name, and then click or touch Save. Using external speakers or headphones NOTE To locate your headphone/microphone jack, please refer to your Quick Start document. Your device is equipped with a full stereo sound system with internal speakers.
Exploring Your Device’s Features Using the Web Camera Using the Web Camera Your device comes with two built-in Web Cameras. With these Web Cameras you can do the following: ❖ Take pictures and record videos with your device ❖ Chat with others and have them see you while using instant messaging (IM) programs ❖ Have video conference calls NOTE To email, instant message or video conference, you must be connected to the Internet.
Exploring Your Device’s Features Using the Memory card reader 89 Inserting memory media NOTE To locate your Memory card reader, please refer to your Quick Start document. The following instructions apply to all types of supported media devices. 1 Turn the media so that the contacts (metal areas) are face down. 2 Push the media into the adapter until it stops. (Sample Illustration) Inserting memory media When inserting memory media, do not touch the metal contacts.
Exploring Your Device’s Features Using the Memory card reader 3 Highlight, and then click or touch the item you would like to eject. If the system is unable to prepare the media for safe removal, a message will tell you to try again later. If the media can be removed now, the system displays Safe to Remove Hardware. If the device has a spring-loaded adapter slot, see step 4; otherwise, skip to step 5. 4 Gently press the card inward to release it. The card pops out slightly.
Chapter 5 Utilities Your device includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, or change default options. These utilities are described in this chapter. NOTE The utilities described in this chapter, and the icons shown in the sample images are applicable only if the related utility is available on your system.
Utilities eco Utility® eco Utility® The eco Utility® monitors your power savings from using the eco power plan by tracking real-time power consumption and accumulated savings over time. To access the eco Utility®: 1 From the Start screen begin typing eco Utility. 2 Click or touch eco Utility. The eco Utility® window appears. (Sample Image) eco Utility® window 3 To activate the eco power plan, select eco Mode on the left side. 4 Click or touch the eco Mode button. 5 Click or touch Close.
Utilities Password Utility 93 Password Utility Setting a password lets you walk away from your device while providing additional protection for your files. When you set a password, you must enter the password before you can work on your device again. TOSHIBA supports different types of passwords on your device: ❖ A supervisor password—Prohibits unauthorized users from accessing certain functions such as System Settings. This is useful if more than one person uses the device.
Utilities Password Utility To set a supervisor password: 1 To access Supervisor Password from the Start screen begin typing Password Utility. 2 Click or touch Password Utility. (Sample Image) Supervisor Password tab 3 Click or touch Supervisor Password. 4 Click or touch Set. 5 Enter your password, and then enter it again to verify. 6 Click or touch Set. NOTE 7 NOTE Under User Policy, this option may or may not ask for password verification.
Utilities Password Utility 95 Deleting a supervisor password To delete a supervisor password: 1 To access Supervisor Password from the Start screen begin typing Password Utility. 2 Click or touch Password Utility. A pop-up screen appears asking for a password. 3 Enter your password, and then click or touch Verify. 4 Click or touch Supervisor Password. 5 Click or touch Delete. An authority verification pop-up screen appears. 6 Click or touch Delete.
Utilities Password Utility 3 Click or touch User Password. (Sample Image) User Password tab 4 Click or touch Set. 5 Enter your password, and then enter it again to verify. 6 Click or touch Set. 7 Click or touch OK to save your password as a text file. NOTE Password Utility will suggest “memo.txt” for the text file name. If you have saved a password previously, using the same name may overwrite your password text file with the new password.
Utilities Password Utility 97 Deleting a user password To cancel the power-on password function: 1 To access User Password from the Start screen begin typing Password Utility. 2 Click or touch Password Utility. A pop-up screen appears asking for a password. 3 Enter your password, and then click or touch Verify. 4 Click or touch Delete. An authority verification pop-up screen appears. 5 Click or touch Delete. 6 Enter the password, and then click or touch Verify. 7 Click or touch OK to exit.
Utilities System Settings System Settings System Settings is the TOSHIBA configuration management tool available through the Windows® operating system. To access it: 1 To access System Settings from the Start screen begin typing System Settings. 2 Click or touch System Settings. The System Settings screen appears.
Utilities System Settings ❖ ❖ 99 Boot Options—Allows you to change the sequence in which your device searches the drives for the operating system ❖ Boot Priority—Allows you to configure boot priority settings. ❖ Panel open/Power on—Allows you to turn on the device when opening the display panel while the device is turned off. ❖ Power On By AC—Enable the Power on by AC function. When you plug in the AC connecter while your device is turned off, the system will boot up automatically.
Utilities Function Key Function Key NOTE The Function options are disabled by default. TOSHIBA Function Key enables you to activate functions by pressing specific keys either singly or in combination with Fn. Some functions show the toast notification at the edge of the screen. These settings turn notifications ON/OFF. 1 To access Function Key from the Start screen begin typing Function Key. 2 Click or touch Function Key. The Function Key screen appears.
Utilities Function Key ❖ Cursor overlay ❖ Numeric overlay 101 (Sample Image) Function Key, detached from keyboard dock With the device detached from the keyboard dock, you can turn notifications ON/OFF for the power plan.
Utilities Recovery Media Creator Recovery Media Creator The Recovery Media Creator utility enables you to create recovery media that can be used to return your system to its out-of-box state, if necessary. For detailed information on using the utility to create recovery media, see “Creating recovery media” on page 38.
Utilities TOSHIBA Application Installer 103 TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your device. To reinstall drivers and applications: 1 To access TOSHIBA Application Installer from the Start screen begin typing Application Installer. 2 Click or touch TOSHIBA Application Installer. The TOSHIBA Application Installer window appears.
Utilities PC Health Monitor PC Health Monitor The PC Health Monitor software program monitors device system functions such as power consumption, the cooling system and the 3D Accelerometer (available on certain models). It alerts users to specific system conditions via pop-up messages. It also tracks the usage of the device and related devices and logs service-relevant information on the device's internal storage drive.
Chapter 6 If Something Goes Wrong Some problems you may encounter when using your device are relatively easy to identify and solve. Others may require help from your network administrator or the manufacturer of the software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
If Something Goes Wrong Problems when you turn on the device If you are working in a program that suddenly freezes, chances are the program has stopped responding. You can exit the program without shutting down the operating system or closing other programs. To close a program that has stopped responding: 1 Press Ctrl, Alt, and Del simultaneously (once), and then click or touch Task Manager. The Task Manager window appears.
If Something Goes Wrong Problems when you turn on the device 107 If you are using the AC adaptor, check that the wall outlet is working by plugging in another device, such as a lamp. Verify that the device is on by looking at the Power button. If the button is glowing, the device is on. If the button is not lit, try turning the device off and then on again.
If Something Goes Wrong The Windows® operating system is not working 2 Verify that the AC adaptor is the correct unit for your device model. The device may not be able to start from an AC adaptor that is rated for less current (amperage) than the device requires, even if the rated voltage is correct, and the plug fits correctly in the DC-IN socket. The labels on the bottom of the device and the AC adaptor show the specifications for voltage (“V”) and current (“A”) for each device.
If Something Goes Wrong The Windows® operating system is not working 109 ❖ The operating system takes a long time to start. ❖ The operating system responds differently from the normal routine. ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
If Something Goes Wrong The Windows® operating system is not working Reset your device ❖ All of your personal files and apps are removed ❖ Your device settings are changed back to their defaults For more information, see “Reset your PC” on page 44. Advanced options Choosing this option presents you with another set of options: System Restore ❖ System Restore allows you to use a Restore point to return the device to a state at which it was performing properly.
If Something Goes Wrong The Windows® operating system is not working ❖ 111 Enable boot logging Creates a file that lists all the drivers that are installed during startup ❖ Enable Safe Mode Starts Windows® with a minimal set of drivers and services. If the device starts and runs in Safe Mode, you will know the Operating System is most likely working properly and that you should look to third-party applications or drivers for the source of your problem.
If Something Goes Wrong Fixing a problem with Device Manager The Windows® operating system can help you If the operating system has started properly but you still have a problem using your device, the online Help can assist you in troubleshooting the problem. Getting to the online Help will differ depending on which interface you are in: ❖ NOTE ❖ Start screen—Type Help and Support As soon as you begin typing, the search feature automatically begins.
If Something Goes Wrong Power and the batteries 3 113 From the list of device(s), click or touch Device Manger. 4 To view the device(s) installed, double-click or touch the device type. The operating system displays the device Properties dialog box, which provides an array of tabs. They may include: ❖ The General tab, which provides basic information about the device. ❖ The Resources tab, which lists resources assigned to the device. This tab does not appear if the device is not using resources.
If Something Goes Wrong Power and the batteries The AC adaptor and power cord/cable work correctly, but the battery will not charge. The battery does not charge while the device is consuming full power. Try turning off the device. The battery may be too hot or too cold to charge properly. If you think this is the probable cause, let the battery reach room temperature and try again. If the battery has completely discharged, it will not begin charging immediately.
If Something Goes Wrong Keyboard problems 115 Keyboard problems You have connected an external keyboard and the operating system displays one or more keyboard error messages. You may need to update your keyboard driver. Refer to the documentation that came with the keyboard or to the keyboard manufacturer's Web site. The keyboard you connected may be defective or incompatible with the device. Try using a different make of keyboard.
If Something Goes Wrong Display problems ❖ Check that the cable connecting the external monitor to the device is firmly attached. ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Press F4 to make sure the display priority is not set for the built-in screen. The screen does not look correct. Choose a theme for your desktop background, under Change the visuals and sounds on your device, in the Themes panel.
If Something Goes Wrong Disk or storage drive problems 117 Small bright dots appear on your TFT display when you turn on your device. Small bright dots may appear on your screen display when you turn on your device. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high-precision technology. Any small bright dots that may appear on your display are an intrinsic characteristic of the TFT manufacturing technology.
If Something Goes Wrong Disk or storage drive problems 3 Right-click or touch the drive you wish to check. (Sample Image) Selecting the drive 4 In the pop-up menu, click or touch Properties. The drive’s Properties box appears. 5 Click or touch the Tools tab. 6 Click or touch the Check button. The Error Checking box appears. The system will alert you if you need to scan the drive. 7 Even if you do not need to scan the drive for errors you can scan by clicking or touching Scan drive.
If Something Goes Wrong Sound system problems 4 119 Click or touch the Optimize button. The system will display the status as it optimizes and defragments the drive. Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software. Consult your network administrator. Some programs run correctly but others do not.
If Something Goes Wrong Wireless networking problems Run the printer’s self-test to check for any problem with the printer itself. Make sure you installed the proper printer drivers as shown in the instructions that came with the printer. You may have connected the printer while the device is on. Disable Sleep mode, turn off the device, and turn off the printer. Turn the printer back on, make sure it is online, and then turn the device back on. Try printing another file.
If Something Goes Wrong Wireless networking problems 121 ❖ If another device is on the same network, verify that it has network access, and can connect to the Internet. If, for example, the other device cannot browse to a public Web site, the ISP’s (Internet Service Provider) service may be disrupted. ❖ Verify that the Service Set Identifier (SSID), or network name, is correct - i.e., that it matches the SSID assigned to the access point you are attempting to connect through. SSIDs are case-sensitive.
If Something Goes Wrong Develop good computing habits ❖ If you have enabled any security provisions (closed system, MAC address filtering, Wired Equivalent Privacy [WEP], etc.), check the access point vendor's Web site for recent firmware upgrades. Problems with WEP keys, in particular, are frequently addressed in new firmware releases. Develop good computing habits Save your work frequently. You can never predict when your device will lock, forcing you to close a program and lose unsaved changes.
If Something Goes Wrong Develop good computing habits 123 Your local computer store or book store sells a variety of self-help books you can use to supplement the information in the manuals. Data and system configuration backup in the Windows® operating system The Windows® operating system offers some easy-to-use features for backing up your Windows® settings and your data - documents and other important files.
If Something Goes Wrong Develop good computing habits 8 In the input field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click or touch Create. The Windows® operating system creates the restore point, automatically stamps it with the current date and time, and displays a message that the restore point was successfully created. 9 Click or touch Close.
If Something Goes Wrong Develop good computing habits 125 Backing up your data or your entire device with the Windows® operating system The most valuable component of your device system is the data you create and store on its internal storage drive. Since problems with either hardware or software can make the data inaccessible or even destroy it, the next most valuable component of your device system may be a recent backup of your data.
If Something Goes Wrong Develop good computing habits restore the Windows® operating system to the state it was in prior to the installation, undoing any changes that the installation process introduced. ❖ Back up your critical data (see “Backing up your data or your entire device with the Windows® operating system” on page 125). ❖ Have your back up DVD(s) on hand in case you need any files from them.
If Something Goes Wrong If you need further assistance 127 If you need further assistance If you have followed the recommendations in this chapter and are still having problems, you may need additional technical assistance. Since some problems may be related to the operating system or the program you are using, it is important to investigate all sources. ❖ Review the troubleshooting information in your operating system documentation.
If Something Goes Wrong Toshiba’s worldwide offices Toshiba’s worldwide offices Australia Canada Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Toshiba Canada Ltd. 191 McNabb Street Markham, Ontario L3R - 8H2 Canada France Germany Toshiba Systèmes (France) S.A. 7, Rue Ampère; B. P.
Appendix A TOSHIBA Function Keys TOSHIBA Function keys provide a quick way to modify selected system functions and to launch applications. NOTE These TOSHIBA Function keys are only available when your device is attached to the keyboard. Functions TOSHIBA Function keys are used to set or modify the following system functions: ❖ ❖ Lock (Instant security) Power Plan ❖ Sleep ❖ Hibernation ❖ Output (Display switch) ❖ ❖ ❖ ❖ Brightness control Wireless Touch pad Mute 129 5.375 x 8.375 ver 2.
TOSHIBA Function Keys Functions Lock (Instant security) Fn+ This TOSHIBA Function key activates instant security. The user logon screen will appear and a user with a valid account will need to log back on to gain access to the computer. Power plan Fn+ This TOSHIBA Function key displays the currently selectable power plans and cycles through the power plans.
TOSHIBA Function Keys Functions 131 Output (Display switch) Fn+ This TOSHIBA Function key cycles through the display options and highlights the available options. (Only the first option is available when you do not have an external monitor attached.
TOSHIBA Function Keys Functions Display brightness Fn+ This TOSHIBA Function key decreases the screen brightness. Fn+ This TOSHIBA Function key increases the screen brightness. Disabling or enabling wireless devices Fn+ This TOSHIBA Function key enables / disables the Wi-Fi® antenna in your computer. The wireless modes are: ❖ Disables the wireless antenna (Airplane mode is ON). ❖ Enables the wireless antenna (Airplane mode is OFF).
TOSHIBA Function Keys Functions 133 Disabling or enabling the numeric overlay Fn+ This TOSHIBA Function key enables/disables the numeric overlay. Disabling or enabling the scroll lock Fn+ This TOSHIBA Function key enables/disables the scroll lock. Volume Mute Fn+ This TOSHIBA Function key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. 5.375 x 8.375 ver 2.
TOSHIBA Function Keys Functions Keyboard Function keys Fn+ This TOSHIBA Function key enables/disables the keyboard backlight. Fn+ This TOSHIBA Function key takes a snapshot of your display screen. Fn+ This TOSHIBA Function key allows you to zoom out. Fn+ This TOSHIBA Function key allows you to zoom in. Fn+ This TOSHIBA Function key decreases the speaker volume. Fn+ This TOSHIBA Function key increases the speaker volume.
Appendix B Power Cord/Cable Connectors Your device ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA Canada UL approved CSA approved United Kingdom Europe VDA approved NEMKO approved BS approved Australia AS approved 135 5.375 x 8.375 ver 2.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your device. Acronyms The following acronyms may appear in this User’s Guide.
Glossary DPI Dots Per Inch DVD Digital Versatile (or Video) Disc 137 DVD-ROM Digital Versatile (or Video) Disc Read-Only Memory eSATA external Serial Advanced Technology Attachment FAT File Allocation Table FCC Federal Communications Commission GB gigabyte GBps gigabytes per second HDD Hard Disk Drive HDMI High-Definition Multimedia Interface HDMI CEC High-Definition Multimedia Interface Consumer Electronics Control HTML Hypertext Markup Language IEEE Institute of Electrical and Ele
Glossary RFI Radio Frequency Interference ROM Read-Only Memory RTC Real-Time Clock SD Secure Digital SDRAM Synchronous Dynamic Random Access Memory SSD Solid State Drive TFT Thin Film Transistor USB Universal Serial Bus URL Uniform Resource Locator WAN Wide Area Network www World Wide Web Terms The following terms may appear in this User’s Guide. A active-matrix display—A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology.
Glossary B 139 backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. Basic Input/Output System (BIOS)—See BIOS. baud rate—The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second). See also bits per second.
C Glossary cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD—An individual compact disc. See also CD-ROM. CD-ROM (Compact Disc Read-Only Memory)—A form of high-capacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM.
Glossary 141 controller—A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU—See Central Processing Unit (CPU). CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache.
Glossary disc—A round, flat piece of material, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk—A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as hard disks. Compare disc. See also hard disk.
Glossary 143 eSATA—An external device that supports hot swapping and fast data transfer. Very useful in storing and transferring large files. executable file—A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device—A device that connects to a computer to expand its capabilities.
Glossary Function key—(1) A feature in which certain keys in combination with the Fn key can set system options or control system parameters, such as the battery save mode. (2) A key or combination of keys that activates a memory resident program. function keys—The keys labeled F1 through F12, typically located on the keyboard. Their function is determined by the operating system and/or individual programs. G ground—A conductor to which all components of an electric circuit are connected.
Glossary I 145 icon—A small image displayed on the screen that represents a function, file, or program. interlaced—A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device—See device. Internet—The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web.
Glossary load—To move information from a storage device (such as a hard disk) into memory for processing. local area network—See LAN. logical drive—A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives.
Glossary 147 non-interlaced—A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk—A disk for storing programs and data that cannot be used to start the computer. Compare system disk. O online—Available through the computer.
Glossary pointer—An icon (usually an arrow) that moves on the screen when you slide your finger across the touch pad or move a mouse. Used to point to and select/activate on-screen items, such as icons, menu items, and buttons. The shape and purpose of the pointer varies depending on the program you are using and what you are doing. pointing device—Any device, such as the touch pad or a mouse, that enables you to move the pointer on the screen.
Glossary 149 RGB (Red, Green, Blue) monitor—A monitor that reproduces all colors by mixing red, green, and blue light in various combinations. RJ45 connector—An eight-wire connector used to connect a computer to a network. ROM (Read-Only Memory)—Non-volatile memory that can be read but not written to. Non-volatile here means that information in ROM remains whether or not the computer is receiving power.
Glossary system prompt—The symbol (in the MS-DOS® operating system, generally a drive letter followed by a “greater than” sign) indicating where users are to enter commands. T TFT display—See active-matrix display. Touch—To activate items displayed on the screen, such as apps, setting icons, and on-screen buttons by touching them with your finger. Tile/Tiles—A list of square or rectangular icons on the Start screen representing applications that can be accessed by selecting them.
Index A AC adaptor 30 AC power 69 AC power light 30 accessing network 86 AccuPoint® primary button 48 secondary button 48 adding memory 37 optional external devices 37 adjusting touch pad settings 52 app, starting 64 App, starting from Start screen 64 apps starting from Start screen 64 audio features 86 B backing up files 59, 65 Backlit keyboard 62 battery battery life 68 care 77, 78 changing 77 charge indicator light 32 charge time 69 charger 69 charging 32, 69 charging the real-time clock (RTC) 70 conse
Index taking care of 77 battery indicator light 72 BIOS Setup see System Settings C caring for your device 57 changing battery 77 charging the battery 32 cleaning the device 57 communications set up 85 computing habits troubleshooting 122 computing tips 58 connecting AC adaptor 30 AC adaptor cord to (DC-IN) 31 device to a network 86 external device 52 HDMI™-compatible TV or display device 53 monitor 54 power cord/cable 32 power source 31 customize device settings 56 D data/entire system backup troub
Index saving 65 Function Key 100 Function keys 132, 133 disabling or enabling wireless devices 132 display brightness 132 Hibernation mode 130 Keyboard Function keys 134 Lock (Instant security) 130 Optical disk drive 133 Output (Display switch) 131 Power plan 130 Sleep mode 130 volume mute 133 Zoom (Display resolution) 134 function keys 61 H headphones using 87 I icon desktop 83 moving to desktop 83 recycle bin 83 safety 27 Shut down 35, 36 Initial setup using your device for the first time 33 internal s
Index deleting a supervisor 95 deleting a user 97 instant password 93 power-on password 93 setting 93 setting a supervisor 93 setting a user 95 supervisor password 93 user password 93 utility 93 port HDMI™ 53 power connecting cable to AC adaptor 31 cord/cable 32 cord/cable connectors 135 energy-saving features 67 power down shut down 34 power light 72 power management 69 optimum performance 69 power plans selecting power plan options 75 power saving options 74 printer troubleshooting 119 problem solvi
Index icon 35, 36 Sleep mode 36 sounds recording 86 speakers using external 87 Start screen exploring the 80 starting an app 64 starting an app from Start screen 64 Startup menu problem solving 109 supervisor password, deleting 95 supervisor password, set up 93 system indicator lights AC power 30 LEDs 32, 71, 72, 88 System Settings 98 battery light is blinking 108 bookmarked site not found 111 checking device properties 112 contacting Toshiba 127 corrupted/damaged data files 119 data/entire system backup
Index a microphone 86 eco power plan 76 Memory card reader 88 touch pad 49 Web Camera 88 using the keyboard 61 using the Toshiba Dual Pointing Device 48 Utilities 91 V video projector adjusting display 56 W warranty standard limited warranty 28 Web Camera using 88 Web sites 127 Wi-Fi® wireless networking 85 Windows® Charms Devices 81 Search 81 Settings 81 Share 81 Start 81 Windows® charms 81 Windows® key 61 Windows® operating system desktop 82, 89 troubleshooting 108 Windows® Store 84 wireless netwo