Manual

Dear Customer
Welcome to the high quality picture world created by the TOSHIBA Projection Color
Television. 13_._
---- I=* r. .... a , ...... _ • o ,
T .......... . vv...emp you u_e the "IV s many excltmng and useful features.
Before on_rp*_" 3 *.h_-.'_._, pl_8_elread all the safety and operating instructions in this manual
-- thoroughly, and k_e_D.L_ r_l for future reference.
Cu'- ' ,_G_LI-------,J
stomer _weetTra _,'i ,
yo. will _=-._;_- .... J_7_r _nd serial number on the back of the TV.
-- Record these p.rnh°_o ;.. t_j_'l_i_es provided below.
-- nur_r t'othem wheneveLYo_ €_aJ_gponyour TOSHIBA dealer regarding this product.
Model Number
Serial Number
Safety Precautions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
| WARNING / /_
NEP/_ OU_tlR
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning symbol in the triangle
tells you that the voltage inside this
product may be strong enough to
cause an electric shock.
DO NOT TRY TO SERVICETHIS
PRODUCT YOURSELF.
The exclamation point in the triangle
tells you that important operating and
maintenance instructions fo|low this
symbol.
CAUTION:
As • safety feature, the AC plug has one prong wider than the other.
It will fit only one way into a standard electrica| outlet.
If the plug will not fit into the outlet, try turning it around.
If the plug will not fit either way. the outlet is probably old and
non-standard. You will need to have a new outlet installed by
an electrician.
DO NOT CHANGE THE SAFETY FEATURE OF THE PLUG.
Wide prong
\
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLET UNLESS THE PRONGS CAN RE FULLY INSERTED INTO THE OUTLET TO
PREVENT ANY EXPOSURE OF THE PRONGS OF THE POLARIZED PLUG.
NOTE TO CATV SYSTEM INSTALLERS IN THE USA:
This reminder is provided to call the CATV system instailer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
2