Manual
I Alig" = nin gS't"l ecolors
• This projection TV uses three separate "IV tubes: a red one, a green one, and a blue one.
The red, green, and blue images are projected onto the screen where they converge to
form a full color picture. You can see a clear picture only when they converge correctly.
• Convergence may drift over time or if you move the "IV. If you can see clear images on
the screen, skip this procedure.
RECALL MUTE
@ ®
®
oo °
TQGHIGA
This adjustment should be made after the TV has been on for at least 30
minutes,
To check and align the colors
Press MENU, then press < or I, until
the PICTURE menu appears.
CONTRAST
BRIGHTNESS
COLCA "lI-"
TINT
SHARPNESS
Press • (or •) until"CONVERGENCE"
is highlighted.
Press < or • to displaythe center
CONVERGENCE menu.
If alignment iscorrect, there will be one
vertical and one horizontal white line.
4
If you see separate colored lines, you
have to align the colors.
Press ENTER to select "RED" or "BLUE."
The selected color is highlighted.
5
Pressthe _ • (up)", " • (down)', " •
(left)" or " • (right)" button to converge
the red or blue line into the green line.
When color convergence is correctly
adjusted, you will see two single white
lines.
@
TO SSLECT C(_-C_
PUSH EXIT
TO SELECT POSIT_O__ _l_O_
TO SELECI" COt.OR
PUSH EXIT _o
.Eom_r_ "I'--
PUSH ENTER
TO SELECT COLOR
PUSH EXIT
2O