Manual

I CONNECTING OTHER EQUIPMENT
Connecting External
Equipment ,continued)
if you connect a VCR with an S-video jack to the "S-VIDEO" jack on the back of the TV, you must also connect the
audio cables to the "VIDEO 1 IN" AUDIO jacks. The S-video cable supplies video signals only.
Antenna/Cable "IV
Antenna_ _ Antenna
input _ output VCR
oAUtd2ot_ S-video
s output
See page 8 for details on
Antenna/Cable TV connections.
S-video oable (Not supplied)
Audio cable (Not supplied)
TV rear
To select the video input source
Turn on the TV and the VCR.
PressW/VIDEO on the Remote Control or on the
"IV to select "VIDEO 1" in this example.
TV
VIDEO 1
VIDEO 2
COLOR STREAM
TO SELECT PUSH TV/VleEO
Notes on the VIDEO 2 IN jacks
The VIDEO 2 IN jacks can also be used for connecting a
second piece of video equipment with S-video out.
To v)ew s)gnals from equ(pment connected to the VtDEO
2 IN jacks, select "VIDEO 2".
Notes:
• When the S-video cable is connected to the S-VIDEO
IN jack, the video cable (phono-type) should not be
connected.
• The S-VIDEO jack accepts SEPARATED Luminance/
Chrominaoce {Y/C) signals conforming tothe NTSC
standard.
Operate your VCR normally.
48