Operation Manual

Settings 139
Security Settings
You can configure security related settings such as setting call barring or changing the
PIN/PIN2 codes and security code for your phone.
1. In standby mode, press . The main menu appears.
2. Settings Security Settings
◆ PIN Code Request: Allows you to set whether to request the entering of your PIN
code to perform verification each time a SIM card is inserted into the phone and
the power is turned on.
◆ Change PIN/Change PIN2: Allows you to change the PIN code and PIN2 code.
Set PIN Code Request to On before you change a PIN code.
◆ Change Password: Allows you to change the security code (page 22) required
to use some functions and modify the settings of your phone. The initial security
code is 0000 or the four-digit number you selected when you concluded your
contract.
◆ Phone Lock: Allows you to prevent another person from using your phone
without entering your security code (page 22). There are three options to choose
from for when to set the phone lock: Phone Closed, Power Saving and Power
On. To cancel the phone lock temporarily, enter your security code and press
(OK). To cancel the lock, cancel the phone lock temporarily and then set it to Off.
◆ Reject Calls: Allows you to set the conditions for rejecting incoming calls.
◆ Reject Addresses: Allows you to add up to 50 email addresses or phone
numbers to the Rejection list to reject the reception of messages from those email
addresses or phone numbers.
◆ Fixed Dialling No.: Allows you to restrict the making of calls and sending of
messages to up to 40 phone numbers in the Fixed Dialling Number list of the SIM
card.
Note
The fixed dialling number function is
unavailable for some SIM cards.
en_TX62.book Page 139 Monday, May 29, 2006 5:12 PM