Operation Manual

File Transfer & Synchronisation 153
Registering a Bluetooth™ Compatible Device
Before establishing a Bluetooth connection, you need to perform a search for the
Bluetooth compatible device to be connected. Bluetooth compatible devices that
can be detected and connected to are referred to as paired devices. You can register up
to 20 paired devices.
1. Select Bluetooth in Step 2 of Activating Bluetooth (page 152), select Paired
Devices and press (Select).
2. Select Search and press (Select).
3. Select a Bluetooth compatible device from the detected devices that appear and
press (Select).
4. Enter your PIN code (4 to 16 digits) and press (OK).
Editing a Registered Bluetooth™ Compatible Device
1. Select Bluetooth in Step 2 of Activating Bluetooth (page 152), select Paired
Devices and press (Select).
2. Select a Bluetooth compatible device and press (Select).
◆ Trust Device: Allows you to set your phone to be ready to establish a connection
without displaying a confirmation screen when a connection request is received.
◆ Connect: Connects to a handsfree compatible device.
◆ Details: Displays information on the Bluetooth compatible device.
◆ Renames: Allows you to change the name of the Bluetooth compatible device.
◆ Delete: Deletes the Bluetooth compatible device.
Tip
If you enter the same PIN code (4 to
16 digits) on both your phone and a
Bluetooth compatible device, the
Bluetooth compatible device is
registered.
Tip
While a handsfree compatible device
is connected, press ( ) to
switch to a handsfree call.
en_TX62.book Page 153 Wednesday, May 31, 2006 11:57 AM