Operation Manual

36 Basic Operations
Call Divert Service
This service allows you to divert calls you are unable to answer to a preset phone
number.
Starting the Call Divert Service
1. In standby mode, press . The main menu appears.
2. Settings Call Settings Call Diverting
3. Select the calls you want to divert and press (Select).
◆ All Services: Allows you to set the Call Divert services for all incoming calls.
◆ Voice Call: Allows you to set the Call Divert service for voice calls.
◆ Video Call: Allows you to set the Call Divert service for video calls.
◆ Fax: Allows you to set the Call Divert service for fax communication.
◆ Data Call: Allows you to set the Call Divert service for data communication.
4. Select the diverting condition you want to set and press (Select).
◆ All Calls/All Faxes: Diverts all calls to the preset phone number without your
phone ringing.
◆ When Busy: Allows you to divert an incoming call to the preset phone number by
pressing (Busy).
◆ No Answer: Diverts a call if you do not answer it within the set time.
◆ Not Reachable: Diverts a call when your phone is out of range or the power is
off.
◆ All Conditional: Diverts a call that meets any of the other conditions except All
Calls.
Tip
 To confirm the status of all call
divert services, select Status after
Step 2 and press (Request).
 To confirm the status of call divert
services individually, select Status
after Step 3 and press
(Request).
en_TX62.book Page 36 Monday, May 29, 2006 5:12 PM