Operation Manual

Video Telephony 75
Making a Video Call
1. In standby mode, confirm that the or indicator for indicating you are in an
area with 3G-network coverage is displayed.
2. Enter a phone number and press (Options).
3. Select Video Call and press (Select).
The sound automatically switches from the earpiece to the speaker, thus enabling
you to begin a handsfree call.
4. Press to end the call.
Note
 You cannot make video calls if the
total cost reaches the specified
maximum call limit when the cost
limit (page 34) is set to On. To
make a new call, set the cost limit
to Off.
 If a video call connection could not
be established, a message appears
and a warning tone plays. To make
a voice call instead, press (Yes).
 When the cost limit (page 34) is set
to On, a video call will be
disconnected if the total cost
reaches the specified maximum
call limit during the call.
en_TX62.book Page 75 Monday, May 29, 2006 5:12 PM