Owner's manual

Introduction

Function charts

5.375 x 8.375 ver 2.4.0

Function charts

The modem supports these communication protocols:

Ring indicator The computer can be powered on automati-

cally when the modem answers a call. This

feature is available only when the computer is

in Resume/Standby mode. Refer to your com-

puter’s documentation for details on ring

indicator power on.

Standby/Hiber-

nate

When the computer is set to Standby or

Hibernate, the modem settings automatically

resume when you turn on the power. Refer to

your computer’s documentation for details on

Standby/Hibernate modes.

Modem On Hold Enables you to talk on the telephone while con-

nected to the Internet, using the same telephone

line. This feature requires ISP support and Call

Waiting/Caller ID Service. The phone line must

support Type 2 Caller ID (CID).

Fast Connect Shortens connection times up to 25 percent, by

storing phone line characteristics.

PCM upstream Transmits up to a maximum rate of 48,000 bits

per second upstream to host V.92 modems that

support this feature.

Functions available in all operating systems

Function Remarks

Data V.92/V.90 From 32 Kbps to 56 Kbps

V.34 From 2400 bps to 33.6 Kbps

V.32bis 4800, 7200, 9600 bps, 12, 14.4 Kbps