SLVL73_WebOM_UK.
English SLVL73_WebOM_UK.book Page 2 Tuesday, May 11, 2010 3:07 PM Contents INSTALLING YOUR TV Quick Menu ............................................ 21 Selecting positions ................................... 21 The Time Display – analogue only ........... 21 Stereo and Bilingual transmissions ............ 21 Safety Precautions ........................................... 4 Installation and important information .............. 5 The remote control ..........................................
SLVL73_WebOM_UK.book Page 3 Tuesday, May 11, 2010 3:07 PM English Setting up the Media Renderer feature ............ 38 Installation .............................................. 38 Media Renderer ....................................... 38 Device Name Setup ................................. 38 Web Password Setup ................................ 39 Media Controller Setup ............................ 39 Maximum Volume Setup .......................... 39 Auto Upgrade .......................................
SLVL73_WebOM_UK.book Page 4 Tuesday, May 11, 2010 3:07 PM English INSTALLING YOUR TV Safety Precautions DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS. This equipment has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety.
SLVL73_WebOM_UK.book Page 5 Tuesday, May 11, 2010 3:07 PM INSTALLING YOUR TV English Installation and important information Where to install Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Fixing strap Stand clip Place the TV on a stable, level surface that can support the weight of the TV.
SLVL73_WebOM_UK.book Page 6 Tuesday, May 11, 2010 3:07 PM English INSTALLING YOUR TV The remote control 11 To return to previous programme position 12 To alter the TV volume Simple at-a-glance reference of your remote control.
SLVL73_WebOM_UK.book Page 7 Tuesday, May 11, 2010 3:07 PM INSTALLING YOUR TV English Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment.
SLVL73_WebOM_UK.book Page 8 Tuesday, May 11, 2010 3:07 PM English CONNECTING YOUR TV Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. LAN port OPTICAL DIGITAL AUDIO OUTPUT ILLUSTRATION SHOWS THE VL MODEL. HDMI® INPUT SOCKETS COMPONENT VIDEO INPUT (EXT 3) SCART 2 (EXT 2) SCART 1 (EXT 1) POWER switch *a decoder could be Digital Satellite or any other compatible decoder.
SLVL73_WebOM_UK.book Page 9 Tuesday, May 11, 2010 3:07 PM CONNECTING YOUR TV To connect a DVI device Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI 3 terminal and audio cables to the PC/ HDMI 3 (AUDIO) socket (see illustration). • The recommended HDMI-to-DVI adaptor cable length is 6.6 ft (2m). • An HDMI-to-DVI adaptor cable transfers video only. Separate analogue audio cables are required. • See “HDMI 3 Audio” on page 63.
SLVL73_WebOM_UK.book Page 10 Tuesday, May 11, 2010 3:07 PM English CONNECTING YOUR TV REGZA-LINK connection You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 65–66. AV amplifier Playback device Playback device For the setup shown above, you will need three HDMI cables (see page 9).
SLVL73_WebOM_UK.book Page 11 Tuesday, May 11, 2010 3:07 PM CONNECTING YOUR TV With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. • When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the SETUP menu. • If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.
SLVL73_WebOM_UK.book Page 12 Tuesday, May 11, 2010 3:07 PM English CONNECTING YOUR TV Connecting a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV. To connect the TV to a home network with an internet connection - Wireless Please refer to "Wireless Setup" section on page 33.
SLVL73_WebOM_UK.book Page 13 Tuesday, May 11, 2010 3:07 PM CONNECTING YOUR TV English Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
SLVL73_WebOM_UK.book Page 14 Tuesday, May 11, 2010 3:07 PM English SETTING UP YOUR TV Startup Application g Before switching on the television, put your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control as detailed on page 6. TV Mounting If you are mounting the TV on a wall please select [Wall]. [Stand] is recommended for other uses. This setting may be modified later under Sound Navi in the SOUND menu.
SLVL73_WebOM_UK.book Page 15 Tuesday, May 11, 2010 3:07 PM SETTING UP YOUR TV Use B or b to move through the list to select a channel, and then press Q to view. In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning. REMEMBER: Press TV at any time to select between ATV and DTV (DTV TV/DTV RADIO/DTV TEXT if available) modes.
SLVL73_WebOM_UK.book Page 16 Tuesday, May 11, 2010 3:07 PM English SETTING UP YOUR TV ATV Manual Tuning Auto Tuning NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them. Tuning Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost.
SLVL73_WebOM_UK.book Page 17 Tuesday, May 11, 2010 3:07 PM SETTING UP YOUR TV Press MENU and use C or c to select the SETUP menu. Press b to highlight ATV Manual Tuning and press Q to select. g h SETUP Menu Language English Country UK Ant/Cable In Each signal will show on the television. If it is not your media recorder, press B or b again to restart the search. When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR.
SLVL73_WebOM_UK.book Page 18 Tuesday, May 11, 2010 3:07 PM English SETTING UP YOUR TV Skip Sorting positions To prevent certain channels from being viewed, positions can be skipped. Channels may be moved and saved to the position of your choice. a b a Select ATV Manual Tuning from the SETUP menu. Use B or b to highlight the position to be skipped and press Q to select. ATV Manual Tuning Pos. Channel 1 C2 2 b Select ATV Manual Tuning from the SETUP menu.
SLVL73_WebOM_UK.book Page 19 Tuesday, May 11, 2010 3:07 PM SETTING UP YOUR TV DTV Settings NOTE: This feature varies depending on the Ant/Cable In setting. Channels The channel order may be changed to suit your personal preference. Manual Tuning a This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. a b Select DTV Manual Tuning from the SETUP menu and press Q.
SLVL73_WebOM_UK.book Page 20 Tuesday, May 11, 2010 3:07 PM English SETTING UP YOUR TV Move — Press the GREEN button to activate the Move feature. Use the B or b buttons to select the channel you wish to move and press Q to check. DVB Character Set If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary.
SLVL73_WebOM_UK.book Page 21 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES Selecting positions To select a position, use the numbered buttons on the remote control. Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer etc. Positions can also be selected using PU and Pu. To display on-screen information such as position, input mode or stereo/mono signal, press . Press again to cancel.
SLVL73_WebOM_UK.book Page 22 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Sound controls Sound Navi You can customize current sound mode settings. Select the appropriate mode in accordance with the installation location of the TV (Stand or Wall) and adjust the equalizer on-screen as desired. Volume controls and mute sound Volume Press y or Y to adjust the volume. a Sound Mute Press once to turn the sound off and again to cancel.
SLVL73_WebOM_UK.book Page 23 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES Dynamic Range Control Surround, Voice Enhancement, and Dynamic Bass Boost help to create an enhanced surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider. This feature allows control of audio compression for some digital TV programmes (MPEG-1 and MPEG-2 audio programmes are not supported).
SLVL73_WebOM_UK.book Page 24 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Headphone Settings Audio Description This setting is used to set the sound output when headphones are connected. Audio Description is an additional narrative sound track for visually impaired individuals to understand and enjoy the story line more fully. The letters AD will be displayed in the channel banner when programmes contain AD content.
SLVL73_WebOM_UK.book Page 25 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES WIDE 4:3 Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast.
SLVL73_WebOM_UK.book Page 26 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal.
SLVL73_WebOM_UK.book Page 27 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES Picture preferences You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode. Most of the picture controls and functions are available in both digital and analogue modes.
SLVL73_WebOM_UK.book Page 28 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Base Colour Adjustment c The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. d a In the Advanced Picture Settings menu, press b to select Base Colour Adjustment, and then press Q. b Press B or b to select an option, and then press c to move to the adjustment window.
SLVL73_WebOM_UK.book Page 29 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES DNR – Digital Noise Reduction When Active Backlight Control is activated, it will automatically optimize the backlighting levels for dark scenes. DNR allows you to ‘soften’ the screen representation of a weak signal to reduce the noise effect. a In the Advanced Picture Settings menu, press b to select Active Backlight Control. a b Press C or c to select On or Off.
SLVL73_WebOM_UK.book Page 30 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Film Stabilization Control Visualization The Film Stabilization feature allows the adjustment of motion smoothness. This feature displays the brightness histogram and control curve of each scene. a In the Advanced Picture Settings menu, press b to select Film Stabilization. a b Press C or c to select Standard, Smooth or Off. In the PICTURE menu, press b to select Control Visualization and press Q.
SLVL73_WebOM_UK.book Page 31 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES Picture still When 4:3 Stretch is activated, the size switching system changes 4:3 programmes into full screen picture. This feature is used to hold a still image on the screen. a In the PREFERENCES menu, press b to select Display Settings, and press Q. b Press b to select 4:3 Stretch, and then press C or c to select On or Off.
SLVL73_WebOM_UK.book Page 32 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Using your home network This TV is a DLNA CERTIFIED™ Player and Renderer. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function. If you want to use this TV as a DLNA CERTIFIED™ Player or Renderer, you will have to configure the network on your TV (see page 12). If you want to use your home network, you will have to configure the network on your TV.
SLVL73_WebOM_UK.book Page 33 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES Easy Setup using PBC (Push Button Configuration) a You can select the Network Type. a In the PREFERENCES menu, highlight Network Setup and press Q. PREFERENCES REGZA-LINK Setup In the PREFERENCES menu, highlight Network Setup and press Q. b Press B or b to highlight Wireless Setup, and press Q. c Press B or b to highlight Easy Setup, and press Q.
SLVL73_WebOM_UK.book Page 34 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES To cancel searching for the AP: c Press RETURN while searching for the AP. A message will appear, then press C or c to select Yes and press Q. Press B or b to highlight Manual Setup, and press Q. Wireless Setup Easy Setup Assisted Setup Assisted Setup a Manual Setup In the PREFERENCES menu, highlight Network Setup and press Q. b Press B or b to highlight Wireless Setup, and press Q.
SLVL73_WebOM_UK.book Page 35 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES The settings configured in Wireless Setup can be confirmed. a Press QUICK to open the Quick Menu. NOTE: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. It is recommended that Encryption be changed to AES (see “Manual Setup” on see page 34). Notes on wireless LAN environment: b Press B or b to select Wireless Information and press Q.
SLVL73_WebOM_UK.book Page 36 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES d Highlight Auto Setup, and then press C or c to select On. NOTE: If you manually set the IP address, you must not use the same IP address for any other device. The IP address you use should be a private address. VL series screen example DNS Setup (VL series only) IP Address Setup Auto Setup On IP Address 133 . 177 . 108 . 157 Subnet Mask 255 . 255 . 255 . 0 Default Gateway . .
SLVL73_WebOM_UK.book Page 37 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES Press B or b to highlight Secondary DNS Address, and edit in the same way as Primary DNS Address. MAC Address You can view the fixed MAC address for the TV and for the Dual Band WLAN Adaptor, if one is installed. a Using the software keyboard You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press Q on a field that accepts character input.
SLVL73_WebOM_UK.book Page 38 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Setting up the Media Renderer feature h NOTE: The Web Password can be up to 15 characters long. Terminology: DMS: DLNA CERTIFIED™ Server i DMR: DLNA CERTIFIED™ Renderer j DMC: DLNA CERTIFIED™ Controller The TV can be configured as a DMR. When operating as a DMR, the TV displays content provided by a DMS. The selection of the media is done by the DMC - the TV does not select the input.
SLVL73_WebOM_UK.book Page 39 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES Maximum Volume Setup This setup determines the password that is necessary for the DMC to access built-in web pages on the DMR. This feature allows you to set the maximum volume of the TV when it receives volume operation commands from a DMC. a b In the Media Renderer Setup menu, highlight Web Password Setup, and press Q. Highlight the Password field and press Q. The Software Keyboard window will appear.
SLVL73_WebOM_UK.book Page 40 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Playing YouTube™ (VL series only) b Item YouTube is a video-sharing service managed by YouTube, LLC. This TV allows you to view YouTube contents. NOTE: • You need to configure a home network before using this feature (see page 12). • If Network Lock is set to On, it will be necessary to enter your four-digit PIN code in order to access network features (see page 56).
SLVL73_WebOM_UK.book Page 41 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES To setup the Advanced Settings: a From the Function menu, press C or c to select Menu, and then press Q. a b Press B, b, C or c to select the setting items, and press Q. A check will appear in the box. To remove the check, press Q again. Press C or c to select Page Tasks. b c Press B, b, C or c to select OK field, and press Q. Highlight Switch Frames, and press Q.
SLVL73_WebOM_UK.book Page 42 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Item Using the Media Player Settings Security When jumping from a protected page to an unprotected page, the message is displayed when the check is applied to Notify of secure/non-secure page changes. Apply the check to select SSL version from SSL Version to use (SSL2.0, SSL3.0, TSL1.0).
SLVL73_WebOM_UK.book Page 43 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES a Using Media Player with a USB or SD Memory Card b When Auto Start is enabled, you will be asked if you want to start the Media Player whenever a USB or SD device is inserted. If Auto Start is disabled (or if you want to connect to a DMS on the network), you must manually start the Media Player from the menu. c Insert USB device into the USB socket or SD Memory Card into the SD card slot on the right side of the TV.
SLVL73_WebOM_UK.book Page 44 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES To select a file in the list of contents: a Press B or b to select a file or folder. b Press Q to move to the next layer, or press RETURN to return to the previous layer. Viewing photo files There are three types of viewing modes. Multi View This view allows you to search for photos in a grid format. The pictures are displayed using thumbnail data in each image file.
SLVL73_WebOM_UK.book Page 45 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES c In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Multi View to Single View, the currently selected photo will be displayed. a Press c to view the next photo. Press C to view the previous photo. b Press B to rotate the image 90° clockwise. Press b to rotate the image 90° counterclockwise.
SLVL73_WebOM_UK.book Page 46 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES During playback: Viewing movie files (on DLNA CERTIFIED™ Server or USB device) • Press W/w to pause. You can move to the desired replay position by pressing C or c during PAUSE. PAUSE or operations during PAUSE may not be available depending on the content, DMC or DMS. • To resume normal playback, press PLAY( c). • To play in fast reverse or fast forward directions, press CC or cc during playback.
SLVL73_WebOM_UK.book Page 47 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES To register your TV to a DivX® account (VL series only) a Press QUICK to open the Quick Menu in list mode. b Press B or b to select Sort. c This TV allows you to play back files purchased or rented from DivX® VOD Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. Press C or c to select Title, New or Old to set the sorting rule.
SLVL73_WebOM_UK.book Page 48 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES To set the repeat mode: Playing music files (on DLNA CERTIFIED™ Server or USB device) You can listen to music from a list of available files. a Press QUICK to open the Quick Menu. b Press C or c to select Off, All or 1.
SLVL73_WebOM_UK.book Page 49 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES a b Press during playback. The information will be displayed on the bottom of the screen. Press again to remove the information. English To display the file status information (DLNA only) Using the Photo Frame feature You can use the TV screen as a digital picture frame. One image (pre-installed or user-installed) can be displayed. Date info can also be superimposed, if desired.
SLVL73_WebOM_UK.book Page 50 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES c c Press c to select Start, and then press Q to open Photo Frame. Press B b C c to select the photo you want to copy from the USB storage device or SD card to the TV's flash memory, and then press Q. Photo Select /Folder 1/54 E05265464.jpg 06:36 Tue, 26 Apr 1920 x 1080 OK Select P Page RETURN Back To open from the Quick Menu Photo Edit a Press QUICK to open the Quick Menu.
SLVL73_WebOM_UK.book Page 51 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES Press B or b to select Clock, Position or Auto Power Off. English b Other features Panel Lock Settings --/-- (---) -- 10:10 Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. a Clock Position Auto Power Off OK Enter Off Left Off In the PREFERENCES menu, select Panel Lock and choose On or Off using C or c.
SLVL73_WebOM_UK.book Page 52 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES The timers On Timer Programme Timers – digital only The feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. When On Timer is set to On, the green On Timer indicator on the front of the television is lit. This feature will set the television to go to a specific channel at a certain time.
SLVL73_WebOM_UK.book Page 53 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES The television can be set to turn itself Off after a certain length of time. a b c In the APPLICATIONS menu, press b to select Sleep Timer. Use the number buttons to set the desired time. For example, to switch the television off in one and a half hours enter 01:30, or press c/C to increase/ decrease in steps of 10 minutes. (Maximum time setting is 12 hours) Press EXIT to finish.
SLVL73_WebOM_UK.book Page 54 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Digital on-screen information and Programme Guide To display More Information When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. b a Press QUICK to open the Quick Menu. Press b to highlight More Information and press Q.
SLVL73_WebOM_UK.book Page 55 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES a Genre selection/searching Select the on-screen guide by pressing GUIDE, and the guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear. TV 6 M6 18:00 18:30 19:00 19:30 09 LES SIM... 33 LES SIM... 06 TOP MODEL 09 LES SIMPSON 10 SUMMERLAND 53 SUMMERLAND 9 W9 11 NT1 a Press the QUICK button from the guide screen.
SLVL73_WebOM_UK.book Page 56 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Digital settings – parental control Parental Setup In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN. Setting the PIN a Press MENU and c to select the SETUP menu. b Use b to select DTV Settings, and then press Q.
SLVL73_WebOM_UK.book Page 57 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES English Digital settings – Channel Options Skip channels This feature allows you to set channels that will be skipped when Pu or PU are used to tune. Selecting favourite channels a Favourite Channels creates a list of the digital channels that are watched most. Four lists can be created, these can be a mixture of television, radio and text channels. b From the Quick Menu, press b to select Channel Options and press Q.
SLVL73_WebOM_UK.book Page 58 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Digital settings – other settings Common Interface The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider.
SLVL73_WebOM_UK.book Page 59 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES English Software Upgrade and Licences System Information and Reset TV Auto Upgrade System Information When Auto Upgrade is set to On, the television will automatically upgrade while in standby if new software is available. This feature can be used to check the version of software currently installed.
SLVL73_WebOM_UK.book Page 60 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES PC Settings Sampling Clock Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen. Horizontal and Vertical Position Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference.
SLVL73_WebOM_UK.book Page 61 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES External input skip This feature is designed to make input selection more convenient. See page 8 for a detailed image showing recommended connections. a Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Alternatively, press the external source selection button o until the picture from connected equipment is shown.
SLVL73_WebOM_UK.book Page 62 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Input signal selection Labeling video input sources This specifies the type of signal going into SCART 2 (EXT 2) on the back of the television. Please refer to the manufacturer’s instructions for the connected equipment. These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV.
SLVL73_WebOM_UK.book Page 63 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES English PC Audio HDMI Settings In order to receive sound from a connected PC, plug the audio cable into the back of the television (as shown in the ‘Connecting a computer’ section), and then use the PC/HDMI 3 Audio setting. Some early HDMI equipment may not work properly with your HDMI TV. Please try setting the Enable Content Type and INSTAPORT™ options to Off.
SLVL73_WebOM_UK.book Page 64 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES Digital Audio Output When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format [S/PDIF]), the following options can be selected. PCM: this mode outputs PCM format to the digital audio output socket. Auto: this mode outputs Dolby Digital (if available) or PCM to the digital audio output socket.
SLVL73_WebOM_UK.book Page 65 Tuesday, May 11, 2010 3:07 PM CONTROLS AND FEATURES Amplifier Control When Amplifier Control is set to On, it allows the “Speaker Preference” feature to become available. This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the television remote control via HDMI connection (page 10). When the Enable REGZA-LINK item in the REGZA-LINK Setup menu is set to On, individual functions also set to On will be activated.
SLVL73_WebOM_UK.book Page 66 Tuesday, May 11, 2010 3:07 PM English CONTROLS AND FEATURES NOTE: • These functions depend on the device connected. • If you select the REGZA-LINK input source from the popup window, some REGZA-LINK devices may automatically turn on. • When the television is switched on it will take a few minutes for the REGZA-LINK icon to appear in the list. When an HDMI cable is removed, it will take a few minutes for the icon to disappear.
SLVL73_WebOM_UK.book Page 67 Tuesday, May 11, 2010 3:07 PM TEXT SERVICES Navigating pages using Auto This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. LIST will save your four favourite pages. If Fastext is available, four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control.
SLVL73_WebOM_UK.book Page 68 Tuesday, May 11, 2010 3:07 PM English TEXT SERVICES Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing.
SLVL73_WebOM_UK.book Page 69 Tuesday, May 11, 2010 3:07 PM PROBLEM SOLVING Q A Below are the answers to some of the most common queries. Q A Q A Why is there no sound or picture? a Check the television is not in standby mode. Check the mains plug and all mains connections. b There is a picture, but why is there little or no colour? Country Colour System b Q A Q A Q A Select the ATV Manual Tuning menu. Highlight the station and press Q. Then press c to select Manual Fine Tuning.
SLVL73_WebOM_UK.book Page 70 Tuesday, May 11, 2010 3:07 PM English PROBLEM SOLVING Q A Q A Q A Q A What is DVB-T? Q A Why are there vertical stripes on the screen when in PC mode? Q A Why are there horizontal stripes and/or blurred images on the screen when in PC mode? Q A Q A Q A Q A Digital Video Broadcast via an aerial/antenna. What is DVB-C? Digital Video Broadcast via a cable connection. How are radio channels selected? Press TV on the remote control and select DTV RADIO.
SLVL73_WebOM_UK.book Page 71 Tuesday, May 11, 2010 3:07 PM PROBLEM SOLVING Why doesn't the Media Player feature operate? Q A What do the LEDs on the front of the television indicate? English Q A Make sure that devices are connected correctly. Incorrect behavior may occur with a USB Hub connection. Check the table below.
SLVL73_WebOM_UK.book Page 72 Tuesday, May 11, 2010 3:07 PM English INFORMATION License Information DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
SLVL73_WebOM_UK.book Page 73 Tuesday, May 11, 2010 3:07 PM INFORMATION English Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
SLVL73_WebOM_UK.book Page 74 Tuesday, May 11, 2010 3:07 PM English INFORMATION Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
SLVL73_WebOM_UK.book Page 75 Tuesday, May 11, 2010 3:07 PM INFORMATION The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder.
SLVL73_WebOM_UK.book Page 76 Tuesday, May 11, 2010 3:07 PM English INFORMATION Specifications and accessories DVB-T Broadcast systems/channels UK UHF 21-68 Broadcast systems/channels PAL-I UHF UK21-UK69 France VHF 05-10 (VHF 01-05) PAL-B/G UHF 21-69 UHF E21-E69 VHF E2-E12, S1-S41 Germany VHF 05-12 UHF 21-69 SECAM-L UHF F21-F69 VHF F1-F10, B-Q Austria VHF 05-12 UHF 21-69 SECAM-D/K UHF R21-R69 VHF R1-R12 Power consumption Model 32SL (approx.
SLVL73_WebOM_UK.book Page 77 Tuesday, May 11, 2010 3:07 PM INFORMATION English © TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland Specification is subject to change without notice.
