VL75* Digital Series
English Contents INSTALLING YOUR TV CONTROLS AND FEATURES Safety Precautions ........................................... 4 Installation and important information .............. 5 The remote control .......................................... 7 Inserting batteries and effective range ........ 7 General controls ............................................ 22 Quick Menu ............................................ 22 Selecting positions ...................................
English Setting up the Media Renderer feature ............ 39 Installation .............................................. 39 Media Renderer ....................................... 39 Device Name Setup ................................. 39 Web Password Setup ................................ 40 Media Controller Setup ............................ 40 Maximum Volume Setup .......................... 40 Using BBC iPlayer .......................................... 41 Using YouTube™ .................................
English INSTALLING YOUR TV Safety Precautions DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND 'LIVE' PARTS. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety.
INSTALLING YOUR TV English Installation and important information Where to install Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Fixing strap Sturdy tie (as short as possible) Stand clip Place the TV on a stable, level surface that can support the weight of the TV.
English INSTALLING YOUR TV Please take note The digital reception function of this television is only effective in the countries listed in the “Country” section of the “SETUP” menu. Depending on country/area, some of this television's functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.
INSTALLING YOUR TV 18 To exit menus 19 To page up, down, left or right 20 When using menus, the arrows move the cursor on the screen up, down, left or right. Press OK to confirm your selection 21 On-screen Menus 22 To return to previous Menu 23 Colour buttons: Text and interactive service control buttons 24 To call up text services 25 To access Media Player Menu 26 Digital Subtitles or Analogue TEXT Subtitle pages if available Simple at-a-glance reference for your remote control.
English CONNECTING YOUR TV Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
CONNECTING YOUR TV English Bundling the cables Install the cable clamps, and put the cables in these.
English CONNECTING YOUR TV Connecting an HDMI® or DVI device to the HDMI input To connect a DVI device The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
CONNECTING YOUR TV English REGZA-LINK connection You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 66–67. the back of your television Playback device AV amplifier Playback device For the setup shown above, you will need three HDMI cables.
English CONNECTING YOUR TV Connecting a computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers. To connect a PC to the RGB/PC terminal When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable and a PC audio cable for the PC/HDMI 2 (AUDIO) socket. Select PC from the PC/HDMI 2 Audio options in the AV Connection menu located in the SETUP menu.
CONNECTING YOUR TV The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV. To connect the TV to a home network with an internet connection - Wireless Please refer to “Wireless Setup” section on page 34. NOTE: • If you connect to a shared network outside your home, it is advisable to use a router.
English CONNECTING YOUR TV Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
SETTING UP YOUR TV g Before switching on the television, put your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control as detailed on page 7. TV Mounting If you are mounting the TV on a wall please select [Wall]. [Stand] is recommended for other uses. This setting may be modified later under Sound Navi in the SOUND menu. Stand Quick Setup a h Press the 1 button. The Menu Language screen will appear.
English SETTING UP YOUR TV m Use B or b to move through the list to select a channel, and then press OK to view. In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning. REMEMBER: Press TV at any time to select between ATV and DTV (DTV TV/DTV RADIO/DTV TEXT if available) modes.
SETTING UP YOUR TV NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them. Tuning Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost. a English ATV Manual Tuning Auto Tuning Press MENU and use C or c to select SETUP menu.
English SETTING UP YOUR TV a Press MENU and use C or c to select the SETUP menu. Press b to highlight ATV Manual Tuning and press OK to select. g h SETUP Menu Language English Country UK Ant/Cable In Each signal will show on the television. If it is not your media recorder, press B or b again to restart the search. When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR.
SETTING UP YOUR TV Sorting positions To prevent certain channels from being viewed, positions can be skipped. Channels may be moved and saved to the position of your choice. a b a Select ATV Manual Tuning from the SETUP menu. Use B or b to highlight the position to be skipped and press OK to select. ATV Manual Tuning Pos. Channel 1 C2 2 b Select ATV Manual Tuning from the SETUP menu. With the list of channels showing, use B or b to highlight the channel you want to move and press c.
English SETTING UP YOUR TV DTV Manual Tuning DTV Settings NOTE: This feature varies depending on the Ant/Cable In setting. Channels The channel order may be changed to suit your personal preference. Manual Tuning a This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. a b Select DTV Manual Tuning from the SETUP menu and press OK. Select DTV Settings from the SETUP menu and press OK. Select Channels and press OK.
SETTING UP YOUR TV DVB Character Set channel you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, use the B or b buttons to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.
English CONTROLS AND FEATURES General controls Selecting positions To select a position, use the numbered buttons on the remote control. Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer etc. Positions can also be selected using PU and Pu. To display on-screen information such as position, input mode or stereo/mono signal, press . Press again to cancel.
CONTROLS AND FEATURES Sound Navi You can customize current sound mode settings. Select the appropriate mode in accordance with the installation location of the TV (Stand or Wall) and adjust the equalizer on-screen as desired. Volume controls and mute sound Volume Press y or Y to adjust the volume. a Sound Mute Press once to turn the sound off and again to cancel. Dual If a programme or film is being broadcast with a soundtrack in more than one language, the DUAL feature allows selection between them.
English CONTROLS AND FEATURES Surround Settings Audio Level Offset Surround, Voice Enhancement, and Dynamic Bass Boost help to create an enhanced surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider. Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences.
CONTROLS AND FEATURES English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE 4:3 Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast.
English CONTROLS AND FEATURES NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Press the “Dot by Dot” is a non-scaling display.
CONTROLS AND FEATURES Picture preferences You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode. Most of the picture controls and functions are available in both digital and analogue modes. PLEASE NOTE: features not available will be greyed out.
English CONTROLS AND FEATURES Base Colour Adjustment Auto Brightness Sensor Settings The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. a In the Advanced Picture Settings menu, press b to select Base Colour Adjustment, and then press OK.
CONTROLS AND FEATURES DNR – Digital Noise Reduction When Active Backlight Control is activated, it will automatically optimize the backlighting levels for dark scenes. DNR allows you to ‘soften’ the screen representation of a weak signal to reduce the noise effect. a In the Advanced Picture Settings menu, press b to select Active Backlight Control. a b Press C or c to select On or Off. b Black/White Level Select DNR from the Noise Reduction menu.
English CONTROLS AND FEATURES d Film Stabilization The Film Stabilization feature allows the adjustment of motion smoothness. e Press b to select Colour or Tint, and then press C or c to adjust. Press EXIT. a In the Advanced Picture Settings menu, press b to select Film Stabilization. NOTE: It is not possible to turn off all three colours simultaneously. b Press C or c to select Standard, Smooth or Off.
CONTROLS AND FEATURES Automatic Format (Widescreen) This feature copies White Balance on the current input to all other inputs that are set to the same picture mode. Individual settings that are not allowed for a specific input will not be copied. When this television receives a true Widescreen picture and Auto format is On, it will automatically be displayed in Widescreen format irrespective of the television’s previous setting.
English CONTROLS AND FEATURES Picture Position The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. a b In the PREFERENCES menu, highlight Display Settings and press OK. In the Display Settings menu, highlight Picture Position. Display Settings Auto Format On 4:3 Stretch Off Picture Position c d Press OK to view the options available for the picture format that has been selected.
CONTROLS AND FEATURES This TV is a DLNA CERTIFIED™ Player and Renderer. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function. If you want to use this TV as a DLNA CERTIFIED™ Player or Renderer, you will have to configure the network on your TV (see page 13). If you want to use your home network, you will have to configure the network on your TV. (see page 13) Change the network settings if necessary (see ‘Setting up the Network’ on page 34).
English CONTROLS AND FEATURES Setting up the Network Easy Setup using PBC (Push Button Configuration) a You can select the Network Type. a In the PREFERENCES menu, highlight Network Setup and press OK. PREFERENCES REGZA-LINK Setup b Press B or b to highlight Wireless Setup, and press OK. c Press B or b to highlight Easy Setup, and press OK.
CONTROLS AND FEATURES e Press RETURN while searching for the AP. A message will appear; then, press C or c to select Yes and press OK. Assisted Setup a b In the PREFERENCES menu, highlight Network Setup and press OK. f Press B or b to highlight Authentication, and then press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. g Press B or b to highlight Encryption, and then press C or c to select None, WEP, TKIP or AES. Press B or b to highlight Wireless Setup, and press OK.
English CONTROLS AND FEATURES Wireless Information The settings configured in Wireless Setup can be confirmed. a Press QUICK to open the Quick Menu. NOTE: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. It is recommended that Encryption be changed to AES (see “Manual Setup” on see page 35). Notes on wireless LAN environment: b Press B or b to select Wireless Information and press OK.
CONTROLS AND FEATURES Highlight Auto Setup, and then press C or c to select On. NOTE: If you manually set the IP address, you must not use the same IP address for any other device. The IP address you use should be a private address. IP Address Setup Auto Setup DNS Setup On IP Address 133 . 177 . 108 . 157 Subnet Mask 255 . 255 . 255 . 0 Default Gateway . . . NOTE: Other items will be grayed out when Auto Setup is set to On.
English CONTROLS AND FEATURES g Press B or b to highlight Secondary DNS Address, and edit in the same way as Primary DNS Address. MAC Address You can view the fixed MAC address for the TV and for the Dual Band WLAN Adaptor, if one is installed. a Using the software keyboard You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that accepts character input.
CONTROLS AND FEATURES h NOTE: The Web Password can be up to 15 characters long. Terminology: DMS: DLNA CERTIFIED™ Server i DMR: DLNA CERTIFIED™ Renderer j DMC: DLNA CERTIFIED™ Controller The TV can be configured as a DMR. When operating as a DMR, the TV displays content provided by a DMS. The selection of the media is done by the DMC - the TV does not select the input. The TV can play photo, movie, or audio files when operating as a DMR.
English CONTROLS AND FEATURES Web Password Setup Maximum Volume Setup This setup determines the password that is necessary for the DMC to access built-in web pages on the DMR. This feature allows you to set the maximum volume of the TV when it receives volume operation commands from a DMC. a b In the Media Renderer Setup menu, highlight Web Password Setup, and press OK. Highlight the Password field and press OK. The Software Keyboard window will appear.
CONTROLS AND FEATURES English Using BBC iPlayer Using YouTube™ You can watch and listen to great BBC programmes from the last 7 days on BBC iPlayer. YouTube is a video-sharing service managed by YouTube, LLC. This TV allows you to view YouTube content. NOTE: • You need to configure a home network before using this feature (see page 13). • If Network Lock is set to On, it will be necessary to enter your four-digit PIN code in order to access network features (see page 57).
English CONTROLS AND FEATURES To use the Drag Mode: Using the Function Menu The Function Menu provides easy access to functions that are commonly used. a Press the BLUE button while displaying YouTube. The Function menu window will appear. Back Forward Reload Home Pointer Menu a Press B or b to select Pointer: ON, and press OK. b Press the BLUE button. c From the Function menu, press C or c to select Pointer, and then press OK. d Press B or b to select Drag Mode, and press OK.
CONTROLS AND FEATURES Item a Press B, b, C or c to select the setting items, and press OK. A check will appear in the box. To remove the check, press OK again. b Press B, b, C or c to select OK field, and press OK. Item Image When jumping from a protected page to an unprotected page, the message is displayed when the check is applied to Notify of secure/non-secure page changes. Apply the check to select SSL version from SSL Version to use (SSL2.0, SSL3.0, TSL1.0).
English CONTROLS AND FEATURES Using the Media Player Basic operation This TV allows you to enjoy movie, music and photo files stored on a USB device connected to the USB 1 port (USB 2 provide access to photos only). Moreover, you can also play photos, movies or music files from your PC by connecting the TV to your home network. Using Media Player with USB Terminology: To change the Auto Start setting: DMP: DLNA CERTIFIED™ Player a Press MENU and C or c to select the APPLICATIONS menu.
CONTROLS AND FEATURES To select a file in the list of contents: a a b c Insert USB device into the USB socket on the right side of the TV. b In the APPLICATIONS menu, select Media Player, and press OK. Press B or b to select a file or folder. Press OK to move to the next layer, or press RETURN to return to the previous layer. To close the Media Player: Press B or b to select Photo, Movie or Music and press OK. a Press EXIT.
English CONTROLS AND FEATURES Single View Viewing photo files In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Multi View to Single View, the currently selected photo will be displayed. There are three types of viewing modes. Multi View This view allows you to search for photos in a grid format. The pictures are displayed using thumbnail data in each image file.
CONTROLS AND FEATURES Viewing movie files (on a DLNA CERTIFIED™ Server or USB device) Press C or c to select Title/File Name, New or Old to set the sorting rule. Item Title (DMS) File Name (USB) You can select movies from a list of available files. Description Movie list example File sorting rules: 1. Unicode priority 2. (0, 1, ..., 9), capital alphabet (A, B, ..., Z), small alphabet (a, b, ..., z) 3.
English CONTROLS AND FEATURES NOTE: If you change the structure or modify any of the folder or file names under the “PRIVATE” folder, the list display as well as movie playback may not function correctly. To sort the folders and files a Press QUICK to open the Quick Menu in list mode. During playback: b Press B or b to select Sort. c Press C or c to select Title/File Name, New or Old to set the sorting rule. • Press W/w to pause.
CONTROLS AND FEATURES Playing music files (on a DLNA CERTIFIED™ Server or USB device) This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. a You can listen to music from a list of available files. Music list example In the APPLICATIONS menu, press b to highlight Media Player, and then press OK.
English CONTROLS AND FEATURES To set the repeat mode: To display the device information a Press QUICK to open the Quick Menu. a Press QUICK to open the Quick Menu in list mode. b Press C or c to select Off, All or 1. b Press B or b to select Device Information. Mode Description USB: Files in the same folder are played back once. DMS: A file is played back once. Off All Files in the same folder are repeatedly played back. 1 The same file is repeatedly played back.
CONTROLS AND FEATURES c Press c to select Start, and then press OK to open Photo Frame. You can use the TV screen as a digital photo frame. One image (pre-installed or user-installed) can be displayed. Date info can also be superimposed, if desired. You can overwrite the photo file with a file from a USB storage device or DLNA CERTIFIED™ Server. To open Photo Frame Open from Menu a Press MENU and C or c to select the PREFERENCES menu. b Press b to select Photo Frame Setup, and then press OK.
English CONTROLS AND FEATURES c Press B b C c to select the photo you want to copy from the USB storage device or DLNA CERTIFIED™ server to the TV's flash memory, and then press OK. Photo Select Settings a Press B or b to select Settings, and then press OK. b Press B or b to select Clock, Position or Auto Power Off. /Folder Settings --/-- (---) -- 10:10 1/54 E05265464.
CONTROLS AND FEATURES English Other features The timers Panel Lock Programme Timers – digital only Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. a In the PREFERENCES menu, select Panel Lock and choose On or Off using C or c.
English CONTROLS AND FEATURES On Timer Sleep Timer The feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. When On Timer is set to On, the green On Timer indicator on the front of the television is lit. The television can be set to turn itself Off after a certain length of time. a In the APPLICATIONS menu, press b to select On Timer and press OK.
CONTROLS AND FEATURES Digital on-screen information and Programme Guide Automatic Power Down The TV will automatically turn itself off (standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel. a When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. In the PREFERENCES menu, highlight Energy Saving Settings and press OK. b Press B or b to select Automatic Power Down.
English CONTROLS AND FEATURES e Press b to select Also. Details of programmes that have started on other channels will be provided. Use C or c to change the display contents. Guide a Select the on-screen guide by pressing GUIDE, and the guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear. To display More Information a b Press QUICK to open the Quick Menu.
CONTROLS AND FEATURES From the guide screen, you can use the genre selection and search features. a b Press the QUICK button from the guide screen. Press B or b to highlight Genre Colour in the Quick Menu, and then press OK. In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN. Setting the PIN Genre Colour Setup Movies Colour Setup c a Press MENU and c to select the SETUP menu.
English CONTROLS AND FEATURES Digital settings – Channel Options Parental Setup The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level. a b In the DTV Settings menu, press b to select Parental Control, and then press OK. Use C or c to choose an option (None or an age setting (4-17 or 4-18 depending on the Country setting)).
CONTROLS AND FEATURES This feature allows you to set channels that will be skipped when Pu or PU are used to tune. a b Digital settings – other settings Subtitles Select the channel you want to skip in your channel list. In digital mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast. From the Quick Menu, press b to select Channel Options and press OK. c Press c repeatedly to highlight the skip (8) box. d Press OK to select.
English CONTROLS AND FEATURES Common Interface The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. a b c Software Upgrade and Licences Auto Upgrade When Auto Upgrade is set to On, the television will automatically upgrade while in standby if new software is available.
CONTROLS AND FEATURES TOSHIBA may offer upgrades for the TV's software in the future. The TV's software is upgraded via the Network. System Information and Reset TV Before downloading software; System Information Configure your TV to connect to the Internet. This feature can be used to check the version of software currently installed. When in DTV mode, it includes additional diagnostic information such as signal strength, signal quality, centre frequency, modulation, etc.
English CONTROLS AND FEATURES PC Settings Sampling Clock Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen. Horizontal and Vertical Position Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference. a In the PREFERENCES menu, press B or b to highlight Display Settings and press OK.
CONTROLS AND FEATURES English Input selection and AV connections External input skip This feature is designed to make input selection more convenient by allowing you to skip unused inputs. See page 8 for a detailed image showing recommended connections. a Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Alternatively, press the external source selection button o until the picture from connected equipment is shown.
English CONTROLS AND FEATURES Labeling video input sources PC Audio These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV. In order to receive sound from a connected PC, plug the audio cable into the back of the television (as shown in the ‘Connecting a computer’ section), and then use the PC/HDMI 2 Audio setting. a In the PREFERENCES menu, press b to highlight AV Connection and press OK.
CONTROLS AND FEATURES Digital Audio Output Some early HDMI equipment may not work properly with your HDMI TV. Please try setting the Enable Content Type and INSTAPORT™ options to Off. Adjusting these settings should allow your early HDMI source to operate properly with your television. When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format [S/PDIF]), the following options can be selected.
English CONTROLS AND FEATURES Using REGZA-LINK Amplifier Control When Amplifier Control is set to On, it allows the “Speaker Preference” feature to become available. This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the television remote control via HDMI connection (page 11). When the Enable REGZA-LINK item in the REGZA-LINK Setup menu is set to On, individual functions also set to On will be activated.
CONTROLS AND FEATURES REGZA-LINK one touch play When connected equipment is switched on, REGZA-LINK will automatically detect the television through the input selection. If the television is in standby, it will be switched on automatically. These functions can be enabled or disabled from the REGZALINK Setup (see page 66). NOTE: • Even if the equipment is showing a menu, the television may automatically show the input source. • This feature depends on the connected equipment and television state.
English TEXT SERVICES Text services Navigating pages using Auto This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. LIST will save your four favourite pages. If Fastext is available, four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control.
TEXT SERVICES English Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.
English PROBLEM SOLVING Questions and Answers Q A Below are the answers to some of the most common queries. Q A Q A Why is there no sound or picture? a Check the television is not in standby mode. Check the mains plug and all mains connections. b There is a picture, but why is there little or no colour? Country Colour System b Q A Q A Select the ATV Manual Tuning menu. Highlight the station and press OK. Then press c to select Manual Fine Tuning.
PROBLEM SOLVING What is DVB-T? Q A Why are there vertical stripes on the screen when in PC mode? Q A Q A Q A Q A Q A Digital Video Broadcast via an aerial/antenna. What is DVB-C? Digital Video Broadcast via a cable connection. How are radio channels selected? Press TV on the remote control and select DTV RADIO. Alternatively select from the GUIDE.
English PROBLEM SOLVING Q A Why doesn't the Media Player feature operate? Q A What do the LEDs on the front of the television indicate? Make sure that devices are connected correctly. Incorrect behavior may occur with a USB hub connection. Check your network setup if using DLNA CERTIFIED™ Server. Check the table below.
INFORMATION English License Information • INSTAPORT™ and INSTAPORT logo are trademarks of Silicon Image, Inc. in the United States and other countries. • YouTube and the YouTube Logo are trademarks of Google Inc. • This product contains NetFront Browser of ACCESS CO., LTD. • DLNA®, DLNA® Certification Logo and DLNA CERTIFIED™ are registered trademarks, service marks, or certification marks of the Digital Living Network Alliance.
English INFORMATION Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
INFORMATION English Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
English INFORMATION Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder.
INFORMATION English USB Media Player Supported Format Photo Extension Format .jpg, .jpeg JPEG Data compatibility: JPEG Exif ver 2.2 Maximum viewable resolution: 4096 x 4096 (HW decode) pixels 16384 x 16384 (SW decode) pixels Maximum file size: 9MB Maximum number of files: 2000/folder Movie Extension System Video Codecs Audio Codecs .mts, .m2ts AVCHD (MPEG-2 TS) MPEG-4 AVC/H.264 Dolby Digital (AC-3) PCM .divx, .div, .
English INFORMATION Specifications and accessories Receiving systems Stereo DVB-T Broadcast systems/channels UK UHF 21-68 Broadcast systems/channels PAL-I UHF UK21-UK69 France VHF 05-10 (VHF 01-05) PAL-B/G UHF 21-69 UHF E21-E69 VHF E2-E12, S1-S41 Germany VHF 05-12 UHF 21-69 SECAM-L UHF F21-F69 VHF F1-F10, B-Q Austria VHF 05-12 UHF 21-69 SECAM-D/K UHF R21-R69 VHF R1-R12 Switzerland VHF 05-12 UHF 21-69 Italy VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Spain UHF 21-69 Nederlands VHF 05-12 UHF 21-
