Operation Manual

14
CONVENIENT FUNCTIONS
The following functions are available
from the remote control handset only.
TV/AV Selection
For receiving the desired signal:
Press 0/AV to select the TV or AV mode.
TV position - to view a
normal TV.
AV position - to receive
through the direct Video
input. AV1 (from 21 pin
SCART socket on the rear)
or AV2 (from Audio/Video
in jacks on the front)
indicator appears on the
screen in AV mode.
This button allows you to go back to the previous channel
by pressing CH RTN. Press this button again to return to the
channel you were watching.
CHANNEL RETURN
CALL
When you press this button once, the channel number will
appear. Press this button again, then the display will
disappear.
MUTE
When MUTE is pressed, the TV sound will be turned off
completely. To disable this function, press the button again
or VOLUME or .
After all channels available in your area have been set in
memory, you can skip unwanted channels as follows.
SKIP FUNCTION
1
Press CH/PAGE or to select the channel which you
want to skip.
NOTE:
To cancel the SKIP function, press DIRECT CHANNEL
SELECTION (numeric buttons) to select the channel which you
want to cancel, then press CANCEL again.
2
Press CANCEL.
When a channel is skipped, the channel number will blink.
3
Skip all unwanted channels the same way following step 1-2.
5J20301A P08-17 23/4/03, 1:04 PM14