Operation Manual

9
Your television has an Automatic Tuning System which makes tuning in your television easy. This Automatic tuning
System scans the entire reception range in your area and automatically stores all available channels of suitable
signal strength in the correct order e.g. BBC1 will tune into channel 1, BBC2 will tune into channel 2, etc.
ONLY WHEN YOU TURN ON THIS UNIT FOR THE FIRST TIME, THE AUTOMATIC TUNING PROCESS WILL BE
AVAILABLE.
1
Press Power ( ) on the unit.
Then press ON/STANDBY on the remote control.
2
Press ENTER.
Your unit will now automatically tune in all available channels.
When the programme on the screen stops changing and the sound comes on, the tuning process is complete.
NOTE: If you use the supplied loop aerial (VTD1432 only), weak channels may not be stored automatically.
You will need to tune these manually.
CONNECT AERIAL TO TV
THEN PRESS ENTER TO
START AUTO TUNING
AUTO TUNING
AUTOMATIC TUNING SYSTEM
5P31101C P08-17 6/6/06, 10:08 AM9