Operation Manual

13
TV OPERATIONS
1
Press Power ( ) on the front panel of the unit. Then press
ON/STANDBY on the remote control (STANDBY indication
will goes off). Press TV/DVD to select TV mode.
2
Direct Channel Selection buttons (0-9)
Press Direct Channel Selection buttons on the remote
control.
1-9 CH: Press your required number only.
10-80 CH: Press the two digits in accordance to the channel
numbers required.
VOLUME 32
CH +/–
Press CH + or – on the remote
control.
3
The VOLUME can be adjusted
by pressing the VOL + or – on the
remote control.
NOTE:
The on screen display will disappear after
4 seconds.
Automatic Power Shut Off
If a station being viewed stops broadcasting
for about 15 minutes, the unit will
automatically shut itself off and go into
standby mode.
Once you have correctly connected
and set up the channels on your set,
you can view the channels as
follows.
5P31101C P08-17 6/6/06, 10:09 AM13