Operation Manual

13
TV OPERATIONS
1
Press Power ( ) on the front panel of the unit. Then press
ON/STANDBY on the remote control (STANDBY indication
will goes off). Press TV/DVD to select TV mode.
After completing the connection and
presetting the channels, follow these
steps for viewing.
2
Direct Channel Selection buttons (0-9)
Press the Direct Channel Selection button on the remote
control.
1-9 CH: Press your required number only.
10-80 CH: Press the two digits in accordance to the channel
numbers required.
CH/PAGE /
Press CH/PAGE or on the
remote control.
3
The VOLUME can be adjusted
by pressing the VOLUME or
on the remote control.
NOTE:
On screen display will disappear after 4
seconds.
Automatic Power Shut Off
If a station being viewed stops broadcasting
for about 15 minutes, the unit will
automatically shut itself off and go into
standby mode.
5M20201A P08-17 26/2/04, 12:06 PM13