Operation Manual

20
CH 2
CH 3
Recording(RED)
Watching(GREEN)
RECORDING A TV PROGRAMME
1
To turn "ON" the TV/VCR, press ON/STANDBY.
Press TV/VCR to select TV/VCR mode.
Load a cassette tape with the
erase prevention tab intact.
2
Press SP/LP to select the desired tape speed SP or LP.
3
Press Direct channel selection
or CH/PAGE or to select
the channel to be recorded
(Example: Channel 2).
4
5
Press two REC simultane-
ously.
"
" and the channel number will
appear on the screen and the
REC indicator will light.
While the unit is recording the
one programme, another pro-
gramme can be seen on this unit.
After the recording, select the TV
channel you want to watch .
NOTES:
• If the power is switched off during re
cording by ON/STANDBY, the TV
section shuts off and the VTR section
continues to record.
• AUTO REWIND FEATURE:
This feature is disabled during OTR
and TIMER REC.
• If the tab has been removed, the tape
will eject whenever two REC is
pressed.
RECORDING ONE PROGRAMME WHILE WATCH-
ING ANOTHER
TO STOP RECORDING TEMPORARILY
Press (PAUSE/STILL) to stop recording of unwanted
material. " " will appear on the screen and the REC
indicator will blink on and off.
Press again to continue the recording.
To prevent damage to the video head and video tape the
pause function will stop the VCR operation after about 5
minutes.
NOTE:
TO STOP RECORDING
Press (STOP) to stop
recording. " " will appear on the
screen.
REC
REC
5N40101B [E] P14-23 5/28/04, 15:2220