Operation Manual

51
TO CHANGE THE PARENTAL LEVEL
NOTES:
• Do not forget the password. If you forget your
password, or would like to change it, you
can reset the code by pressing both the DVD
STOP button on the unit and the number 7
button on the remote control for approx. 3
seconds simultaneously.
Please contact the customer helpline on
page 57 for details.
• If parental level is set in stop mode, the pa-
rental control is not activated when PLAY is
pressed. You need to press OPEN/CLOSE
to activate parental control.
1
2
3
4
5
6
7
Press MENU/SETUP in the
stop mode or No Disc.
Press or to select
“Parental”. Then press or
ENTER.
Press ENTER.
The rating is now unlocked.
Press
or to select “Paren-
tal”, then press
or to
change the parental level.
Press
or to select “Pass-
word”, then press number
buttons (0-9) to enter the
password.
NOTE: You can change the
password at this time if you
want.
Press ENTER.
The parental level is changed
and locked.
Press MENU/SETUP or RETURN to remove the Menu screen.
• If you input a wrong
number, press CANCEL.
Press number buttons (0-9)
to enter the password you
have stored.
8
Press (OPEN/CLOSE) on the unit to activate parental control.
5N40101B [E] P49-52 5/28/04, 15:2451