Operation Manual

12
CH TUNING
GUIDE CH SET
CHANNEL SETUP
EXIT
ENTER
SELECT
: MENU
: ENTER
:
TIMER REC SET
AUTO REPEAT OFF
CHANNEL SETUP
TV SETUP
CLOCK SET
EXIT
ENTER
SELECT
: MENU
: ENTER
:
MANUAL TUNING
MANUAL TUNING
1
Press TV/VCR to select TV/
VCR mode.
Press MENU.
Press
or to select the
CHANNEL SETUP mode,
then press ENTER.
You should only need to manually tune
channels on your
unit if the Auto Setup
missed one station or you wish to tune.
Press or to select the
CH TUNING mode, then
press ENTER.
2
3
TO SKIP A CHANNEL
To skip unwanted channels press CH/
PAGE to select the channel you want to
skip. Then press CANCEL. The channel
number flashes.
To cancel the skip setting, select the
skipped channel using Direct Channel
Selection, then press CANCEL.
5
Press or to select the
required channel number (1-
80). Press ENTER to store
the channel number.
If you can not get a clear
picture, press or until
the picture becomes clear.
When you have a clear crisp
picture store this setting by
pressing ENTER.
VIDEO Plus+/PROG.
4
CH 1
EXIT
SEARCH
: MENU
:/ F.TUNE
6
The unit channels can be preset to different TV broadcast
channels at anytime simply repeat steps 3-5.
7
When all required stations have been set, press MENU
repeatedly to return to normal TV screen.
Press or to search the
broadcast stations. Each time
a station is found the search
will stop. Press or to
continue searching until all
the stations you want are
found, then press ENTER to
store the station you have
selected.
5N50301A [E] P10-13 1/7/05, 4:50 PM12