Operation Manual

30
VIDEO INDEX SEARCH SYSTEM (INDEX)
1
Press TV/VCR to select TV/
VCR mode.
To search for an index mark,
or skip over a number of index
marks:
Press INDEX during stop or
playback.
Select the number of INDEX
marks to be skipped by using
number buttons (1-9).
2
Press (FWD) or
(REV). The unit will skip over
the selected number of INDEX
marks and will start playback
at the selected mark.
3
NOTES:
• When you recorded an INDEX mark at
the very beginning of the tape, the mark
may not be found.
• During INDEX search, the tape may
stop and begin to play at a slightly
different location.
• INDEX may not function properly with
old or worn out video tapes.
SEARCHING FOR AN INDEX MARK
Example:
When the tape has four sepa-
rate recorded Programmes, se-
lect 4 to go to the beginning of
the 4th programme (4th index
mark).
The VIDEO INDEX SEARCH SYSTEM
(INDEX) enables you to locate the
beginning of any recording made on the
unit. The Index Search function auto-
matically records an INDEX mark on the
tape whenever a recording is initiated.
This mark can easily be located by
using
(FWD) and (REV).
VIDEO Plus+/PROG.
5N50301A [E] P25-32 1/7/05, 4:51 PM30