Operation Manual

44
Jump Time
Title
Chapter
/Enter/0 9/Cancel/Jump
ZOOMING/LOCATING DESIRED SCENE
VIDEO Plus+/PROG.
NOTES:
•You can select the Pause, Slow or Search
playback in the zoom mode.
• Some discs may not respond to zoom
feature.
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
In the zoom mode press ZOOM repeatedly to return to a
1:1 view (
Off).
1
Press ZOOM during
playback.
The centre part of the
image will be zoomed in.
Each press of ZOOM will
change the ZOOM
1
(Min.),
2 (Medium) and
3 (Max.).
2
3
Zooming
Use the title, chapter and time recorded on the DVD disc to
locate the desired point to play back. In the case of VCD/
CD discs, time and track are used to locate the desired
point to playback.
Press number buttons (0-9) to input the number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
1
Press JUMP during play-
back.
3
Locating Desired Scene
Press ENTER.
4
• Playback starts.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.
Press
/ or / to view a different part of the frame.
You may move the frame from the centre position to UP,
DOWN, LEFT or RIGHT direction.
2
Press / to select the “Time”, “Title” or “Chapter”.
1
1
5N50301A [E] P40-46 1/7/05, 4:52 PM44