Operation Manual

58
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Labora-
tories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the
rights of copyright owners and be contrary to copyright laws.
NOTE: In the case that the scart input of the unit is connected to AV1 scart of a recordable
equipment such as a VTR, DVD+VTR, DVD-R etc. and when the input of the recordable
equipment is also selected to AV1, there maybe some white flashing lines on the screen and a
high pitch sound may also be heard. This is due to the feedback loop of the connections to
the unit and it is not a defect of the unit.
6
Aim it at the remote control sensor.
It is not aimed at the remote sensor.
6
6
6
6
Operate within 5 metres and reduce the
light of the room.
Clear the path of the beam.
Replace batteries.
Install batteries correctly.
Polarities of the batteries, + or –, are not
inserted correctly.
Batteries are weak.
Obstacle in the path of beam.
Distance too far or there is too much light in
the room.
Remote control does not
work.
38
35
38
Insert a disc.
Insert a playable disc (Check the disc type
and colour system).
Place the disc with the playback side down.
The disc is placed upside down.
An unplayable disc is inserted.
No disc is inserted.
Place the disc correctly inside the guide on
the disc tray.
The disc is not placed within the guide.
The unit does not start
playback.
Clean the disc.
The disc is dirty.
Cancel the parental lock function or change
the parental lock level.
The parental lock function is set.
Playback does not
follow the course of the
disc’s program.
These operations may prevent a proper
progress of the contents.
It is in the mode of repeat playback,
memory playback, etc.
The function is prohibited with the unit or
the disc.
–
appears on the screen.
CAUSE
SYMPTOMS SOLUTION PAGE
DVD
38
51,52
35
–
–
*
*
*
*
REMOTE CONTROL
BEFORE REQUESTING SERVICE (CONTINUED)
5N50301A [E] P54-Back 1/7/05, 4:53 PM58