Manual

PLAYBACK
Usefid Functions in Tape Operation
These functions wd_help your playback
[_,'_IT[Tb_It II"tt'4"lt';_
ENTER
PLAY
FF
REW
STOP
COUNTRESET
PROG
REMAIN;
COUNTER
DISPLAY
You can view the clock, hnear time counter or tape remaining
time in the VCR display or on the TV screen
Each time you press REMAIN/COUNTER, the VCR display
changes m sequence as follows
_' Linear brae courtier _ Tape remaining time (R) _ CLock
The ind_cabon above will also appear on the TV screen by pressing
DISPLAy They are swdchable with REMAIN/COUNTER
To reset the linear time counter to "0:00:00"
The counter Esautomatically reset to 0 00 00' when a cassette =s
ejected [f you want to reset at another po=nt, such as the beginning of a
new recording just press COUNTRESET
Notes
• The hnear hme counter does not work on nonrecorded porIions on the tape
• When the tape ;s elected or the VCR is turned off the dlsp}ay changes to
clock
• it the Iape rewinds back over O000', ' appears in the VCR display
• The d_splayed brae of the hnear bme counter is only an appro×lmabon
To view the tape remaining brae In the VCR display, select the
tape length beforehand
][ Turn on the VCR and load a cassette
2
3
4
Press PROG. to display the MENU screen
Select'SET UP" using FF or REW, and
Select the length of the tape. using
FF or REW
T120. for a T-120 tape or shorter F_
W _2_
T160. for a T-140 or T-160 tape v,522
T180. for a T-180 tape _'"
_ressENTER
I'__11_ wll,_ ul
120 161 196
0. orr
En6 Fail ESP
5 Press PROG. to exit
6 Press REMAIN/COUNTER
The remalnEng bme I R - - -J appears _n the VCR d_splay
Notes
• The d_splayed remaining brae _san approx_mabon
• The remaining brae is calculated according to the tape speed (SP or SLP)
and the cassette type
23