Manual

Timer Program Recording (continued)
5
Move to the next using FF, and set
the recording date using PLAYor
STOP.
The date changes as follows
8/25 _ 9/25 _ _ 7/25 _ WKLYSU
L MO-FR _ WKL_SA
CII DR11E 011 OFF SPD
eEnoI(_1|25 lil__l__ ...... lip
| -- -/ .........
0 -- -/ .........
| /
l 0 --
6
[WKLYSU] I_NKLYSA] You can record TV programs on the same
channel on the day and time every week
[MO~FR] You can record TV programs on the same channel on the
day and time Monday through Friday
Move to the next using FF, and set
the hour and minutes of the
recording start time
o.o.. ,. 0. ,,./8
i
| -- -I .........
| -- -/ ...... _- -
° , _
0 -- -/ .........
° /
EnD._
7 Move to the next, and set the
recording off time
8 Move to the next, and select the
tape speed (SP) using PLAYor
STOP.
For the tape speed AUTO (Auto Speed
Select)", see below
To set another program, press FF and
select the next hne plessmg STOP
Repeat steps 4 to 8
9 Press PROG.
Now programming _scompleted
]0
I _ _L_J _
£H DRI1E on OFF SPD
• 25 8/s| g20_,_O_DII_ILP
0 -- -/ .........
0 -- -/-- _-- _-- -
EnD _
• -- _/__
• -- -/--
• -- -/--
Auto Speed Select
CII DR11E Oft OFF SPD
25 0/50 9"zo PNI000_ ]O[
-- _/ .........
__ _/__
__ _/__
/
__ _/__
EnO'
OREC_ , TIMER
Press both TIMERsimultaneously _ r_ LS
The power turns off and the VCR enters
the timer standby mode O _-7/-/ _"
J'L LI
If you are not sure the tape is long enough for
timer program recording m the SP tape speed
set the recordtng tape speed to AUTO"
Recording starts in the SP tape speed and the
VCR automatically selects the tape speed to
record the program to the end If the tape length
is not long enough, the tape speed automatically
changes from SP to SLP
Notes
• Make sure that the tape lenglh _sselected correctly
according to the tape used on the SET UP screen
(page 231
• When the SLP tape speed ts selected and the tape
length ts not sufftctent to record the program to the
end, the program cannot be recorded to the end
• The pqcture wdl be d_storted when playing the part
where the recording tape speed ts switched from
SP to SLP wtth the Auto Speed Select feature
27