Manual

Channels on the VCR
section is required if you receive only normal TV or unscrambled cable channels.
Incoming Antenna/Cable(CATV) Signals
The VCR scans through all receivable TV and CATV channels and stores only the active
ones in your area into the memory. Once the storing is finished, you can select a desired
channel using CN/TRK.
Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
• Press LSELECTso that the channel number will appear if "L" is displayed in the VCR display.
irm':r-,-,-,-,-,-,-_r_- • • • - • ][_Fllffl_
-NumberguUons
.100
-REW
FF
-I.SELECT
1,6
Press PROG to display the MENU screen.
Select "PRESET" using FFor REW,
and press ENTER.
[:LI_K $1:1 I
cx MEMORY
Select "CH MEMORY" using PLAY
or STOP, and press ENTER.
__ u,]l_
rm,__ _ on
___J F=c.
Set "TV/CATV" to "TV" or "CATV" using FF or REW.
TV: To store channels received via the antenna.
CATM: To store channels received via the incoming cable.
Select "AUTO SCAN" using PLAYor
STOP, and press FFto set to "ON".
The VCR starts scanning and the
channels are stored in the VCR in
ascending order. When the scanning is
finished, the screen automatically
returns.
¢_mmln..1_
AUTO $[on z CH on
El1 D :(_
Press PROG. twice to exit.