Manual

E.I_ITF,Z_ I_rmq]t"._
ENTER
PLA Y
FF
REW
STOP
COUNTRESEt
- REMAI_
COUNTER
You can view the clock, linear time counter or tape remaining
time in the VCR display or on the TV screen.
Each time you press REMAIN/COUNTER, the VCR display
changes in sequence as follows:
_ Linear time counter -* Tape remaining time (RT) _ Clock
The indication above will also appear on the TV screen by pressing
DISPLAY. They are switchable with REMAIN/COUNTER
To reset the linear time counter to "0:00:00"
The counter is automatically reset to "0:00:00" when a cassette is
ejected. If you want to reset at another point, such as the beginning of a
new recording, just press COUNT RESET.
Notes
• The linear time counter does not work on non-recorded portions on the tape.
• When the tape is ejected or the VCR is turned off, the display changes to
clock.
• If the tape rewinds back over "00:00", "-" appears in the VCR dispJay.
• The displayed time of the linear time counter is only an approximation.
To view the tape remaining time in the VCR display, select the
tape length beforehand.
Turn on the VCR and load a cassette.
Press PROG. to display the MENU screen.
Select "SET UP" using FFor REW, and press ENTER.
..... I_ _, • II1;;;i--w--ISelect the length of the tape, using
FFor REW.
T120: for a T-120 tape or shorter
T160: for a T-140 or 1"-160 tape
T180: for a T-180 tape
F--MTr,_e__]EIi_ fn. Esp
Erid :(_
Press PROG to exit.
Press REMAIN/COUNTER.
Theremainingtime ("RT- : - -") appearsin the VCRdisplay.
Notes
• The displayed remaining time is an approximation.
• The remaining time is calculated according to the tape speed (SP or SLP)
and the cassette type.