Manual

ording a TV Program
ection explains the basic recording operation.
Preparation
. Select the video channel (3 or 4) or video input mode on the TV.
-2
-6
5
To record from other
connected equipment
In step 3, press LSELECTto
switch the display as follows:
L: To record via the LINE iN 1
jacks on the rear panel.
Load a cassette withthe safety tab attached.
Press TV/VCR so that the "VCR" F-o_
indicator appears in the VCR display, l ,c,
Select a channel to record with [ C_II.._II
CHANNEL on the VCR, or CHFI'RK o_ I- I._1
or number buttons on the remote vc. /_ / I
control.
If you see "L" in the VCR display, press I.SELECTso that the channel
number appears.
• If you record cable channels via the cable box, make the output
channel number of the cable box or "L" appear, depending on your
connection. (See pages 11 - 12.)
Press SP/SLPto select the
(To
recording tape speed. /- / /-7
SP: Suitable for general recording with vc. _-/L I-
better picture and sound quality.
SLP: Suitable for tripling recording time, but with less picture and
sound quality than using the SP tape speed.
• REC _r TIMER
Press REC on the VCR, or g
simultaneously press both REC on
the remote control, o_ O/_-- I--
Recording starts, vc, I _ /._ /._
Press STOPto stop recording.
Watching a TV program while
recording another
1) While recording, press TV/VCR to turn off
"VCR" indicator.
2) Choose another channel using the channel
selector on the TV.
Skipping unnecessary scenes while
recording
Press PAUSE/STILL to stop recording
momentarily, To resume recording, press
PAUSE/STILL again,
Note
The VCR automatically shifts to the stop mode if the
recording pause mode continues for 10 minutes.
24
Recording off time setting
By setting the recording off time, the recording
stops and the VCR is turned off automatically.
While recording, press simultaneously beth REC
on the remote repeatedly to set the desired off
time.
Each time you press REC, each half-hour up to
about 4 hours appear cyclically.
o_ /9/-7 J/-7 ....
,c. I _LI_I LI .....
Notes
• To cancel the recording in progress, press
POWER on the VCR.