Manual

+ +;++;+;++issection explains the basic playback operation.

Preparation

• Select the video channel (3 or 4) or video input mode on the TV.

• Press VCR to set the remote control operating the VCR.

_c==ill

- 2,3 I

REW .....................

Load a recorded cassette.

Power is turned on.

If the cassette has no safety tab,

playback starts automatically.

Press PLAY/x2 to start playback.

':"flS'

,,c. I L

To stop playback, press STOP.

: 5TLTI

VCR

'10

_'ii Press PLAY/x2 during playback.

i_;_ A tape runs at double speed

.....................playback.

To resume normal playback Press PLAY/x2.

Rewinding / Fast-forwarding

Press REWor FF on the Remote control, turn REV or FWD on

the VCR in the stop mode.

Adjusting the tracking

When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound

(DigitalAuto Tracking).

If the VCR cannot locate the best possible tracking point, hold down one of CH/TRK to adjust the

tracking manually.

Notes

• During the adjusting, the playback picture and sound may be distorted.

• The digital auto tracking is activated only in the playback mode.

• The noise on the screen may not be completely eliminated depending on the tape used, especially when the

tape was recorded on another VCR.

S-VHS Quasi Playback (SQPB)

• This VCR can also play back at tape which is recorded in S-VHS format.

But the playback pictures does not have the same quality and

resolution as the original S-VHS playback picture.

• This VCR cannot record in S-VHS format.

• SQPB is an abbreviation for S-VHS Quasi Playback.