User's Manual

Wireless Remote Controller Kit
Owner’s Manual
–9–
5 HOW TO ADJUST AIR DIRECTION
• While the air conditioner is not working, the louver (air direction adjusting plate) is closed
automatically.
• During the preparation for heating, the louver is directed upward and it starts swinging after
the preparation for heating is canceled though the automatic louver display on the remote
controller shows swinging even during this period.
To set air direction
Push during operation. Air direction
changes each time you push the button.
Heating mode
Keep the louver pointed downward so that
discharged hot air reaches the floor.
To start swinging
Push to set the louver direction to the
lowest, and then push again. Louver
swinging appears on the display and air
direction automatically changes up and
down.
Cooling/dry mode
Keep the louver pointed upward. Otherwise,
dew drop may form around the discharge
port and drop from the unit.
To stop swinging
Push once again while the louver is
swinging. The louver can be stopped at a
desired position. Then air direction can be
set again from the uppermost by pushing .
* The louver does not stop while it is pointed
downward during cooling or drying. Even if you
attempt to stop the louver with the louver
pointed downward during swinging, it stops at
the third position from the uppermost direction.
Fan mode
All operation modes
Display when swinging is stopped
• This remote controller has no function to
set air direction individually or power-
saving operation or to change the swing
mode that are described in the Owner’s
Manual of the indoor unit.
Initial setting
Initial setting
Initial setting
Swing
Continuous
operation
Heating/fan mode Cooling/dry mode
9-EN
EH78981901_01EN_remo_OM.book Page 9 Saturday, November 10, 2007 4:26 PM