User's Manual

Wireless Remote Controller Kit
Owner’s Manual
–3–
2 PART NAMES AND FUNCTIONS
 Remote Controller (WH-H1JE2)
• Up to 8 indoor units in a group can be controlled by one remote controller.
1 Transmitting part
2 Start/Stop button
Starts and stops the air conditioner
alternately.
3 Mode select button
Selects an operation mode.
4 Air volume button
5 Time setup button
Used for timer setting. (See page 8)
6 Filter button
No function
7 RESET button
Used after batteries are replaced or the slide
switch is switched. (See page 10)
8 Slide switch (See page 10)
9 Battery compartment (See page 10)
10 Cover
Slide the cover downward holding its both
sides.
11 Remote controller sensor
Senses the ambient temperature when the
remote controller is selected with the sensor
button.
12 Operation mode display
Displays the air conditioner operation mode.
(This illustration shows all display contents.)
13 AUTO louver display differs according
to the installed unit. (See page 9)
14 Setup temperature button
Every pushing this button, temperature rises
by 1°C.
Every pushing this button, temperature lowers
by 1°C.
15 Swing/air direction button
(See page 9)
16 Address button (See page 12)
17 Ventilation button
The remote controller is not operated even if
this switch is pushed. (no function)
18 Sensor button
Selects the temperature sensor of the remote
controller.
The temperature sensor of the indoor unit is
selected by default. While the indoor unit
temperature sensor is selected, is
displayed on the display.
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
ADR
SENSOR
ADR
ACL
3-EN
EH78981901_01EN_remo_OM.book Page 3 Saturday, November 10, 2007 4:26 PM