User's Manual

Wireless Remote Controller Kit

Owner’s Manual

–6–

 Operation section

Push each button to select a desired operation.

• The details of the operation needs to be set up once, afterward, the air conditioner can be

used by pushing ON/OFF only.

1 Operation select button

Selects the desired operation mode.

2 Fan mode select button

Selects a fan mode.

3 Time setup button

Used for timer setting. (See page 8)

4 Check button

The CHECK button is used for the check

operation. During normal operation, do not

use this button.

5 Temperature set button

Adjusts the room temperature.

Set the desired set temperature by pushing

or .

6 Start/Stop button

When the button is pushed, the operation

starts, and it stops by pushing the button

again.

When the operation has stopped, the

operation lamp and all the displays disappear.

7 Filter button

Resets (Erases) “FILTER ” display.

OPTION :

Remote controller sensor

Usually the temperature sensor of the indoor

unit senses the temperature.

The temperature on the surrounding of the

remote controller can also be sensed.

For details, contact the dealer from which

you have purchased the air conditioner.

SENSOR

ADR

ACL

6-EN

EH78981901_01EN_remo_OM.book Page 6 Saturday, November 10, 2007 4:26 PM