User's Manual

Wireless Remote Controller Kit
Owner’s Manual
–7–
3 HOW TO OPERATE INDOOR UNIT
 Auto, Heat, Dry, Cool, Fan
• The automatic cooling/heating and
heating functions are not provided for
cool-only types.
• The automatic cooling/heating is not
available for heat pump types that are not
provided with the automatic cooling/
heating function.
Power
Turn on the power switch on the remote
controller 12 hours before starting operation.
* The remote controller is disabled for approx.
1 minute after the indoor unit has been
powered on. This is normal. (The signal from
the remote controller is received, but the
receive data is discarded.)
1 Push .
2 Push to select an operation mode.
• Select Auto, Heat, Dry, Cool, or Fan.
3 Push to select a fan speed.
• When the Auto mode is selected, the fan
speed changes automatically. The fan
speed does not change automatically in
the Fan mode.
4 Push either button of to select the
desired temperature.
• Temperature setting is not available for the
Fan mode.
5 Stop
Push .
When the operation is stopped with the
remote controller, the outdoor unit fan keeps
running in some cases even after the
compressor of the outdoor unit has stopped.
• If the room is not well heated with FAN
during heating, change the fan
speed to FAN or FAN .
Although selected fan speed is displayed,
some indoor unit types are not provided
with the air volume change function. (Fan
speed is constant.)
• If the unit operation cannot be stopped
in the usual manner, turn off the power
switch and contact the dealer from
whom you purchased the air
conditioner.
 Automatic Cooling/Heating
When all indoor units in the same refrigerant
system are under the group control, heating
or cooling operation is automatically
performed according to the difference
between the setup temperature and the
room temperature.
 Self cleaning
The self cleaning operation starts
automatically after running the cooling/dry
mode (10 minutes or more) to keep the
inside of the indoor unit clean.
(For details, refer to the Owner’s Manual of
the indoor unit.)
To stop self cleaning forcibly, push twice
quickly.
1
2
3
4
7-EN
EH78981901_01EN_remo_OM.book Page 7 Saturday, November 10, 2007 4:26 PM