User guide

37
Getting Started
Connecting to a power source
Connecting to a power source
Your device requires power to operate. Use the USB Power
cable and USB/AC adaptor to connect the device to a live
electrical outlet, or to charge the device’s battery.
Always confirm that the USB/AC adaptor (and extension
cable plug if used) has been fully inserted into the socket,
to ensure a secure electrical connection. Failure to do so
may result in a fire or electric shock, possibly resulting in
serious injury.
Be careful if you use a multiple connector. An overload on
one socket could cause a fire or electric shock, possibly
resulting in serious injury.
Always use the TOSHIBA USB/AC adaptor that was
provided with your device, or use USB/AC adaptors
specified by TOSHIBA to avoid any risk of fire or other
damage to the device. Use of an incompatible USB/AC
adaptor could cause fire or damage to the device
possibly resulting in serious injury. TOSHIBA assumes no
liability for any damage caused by use of an incompatible
adaptor.
To connect AC power to the device:
1 Connect the USB Power cable to the USB/AC adaptor.
Handling the cord on this product will expose you to
lead, a chemical known to the State of California to
cause birth defects or other reproductive harm.
Wash hands after handling.
2 Plug the USB Power cable into the Micro USB port on
the device.
Do not force the plug into device.
3 Connect the USB/AC adapter to a live electrical outlet.
_
+
NOTE