User's Manual
25
CONTROLS AND FEATURES
English
This television offers the choice of personalising the picture
style. Press to view the different styles available:
Dynamic
,
Standard
,
Mild
,
Movie
,
Game*
and
PC
(
or
PC
Fine)**
are preset options and effect many features/settings
within the television. You can customise current picture mode
settings as desired. For example, while selecting "
Dynamic
," if
you change the following items, such as
Backlight
,
Contrast
,
Brightness
,
Colour
,
Tint
,
Sharpness
,
Black/White Level
,
Cinema mode
and
Colour Temperature
, your new setting is
stored as "
Dynamic-user
."
*
Game
mode is available in the external input mode (other
than aerial input). When you select Game mode, the
suitable widescreen formats will be selected.
**
PC
mode is available in the RGB/PC input mode or HDMI PC
format mode.
PC Fine
mode is only available in TOSHIBA’ s PC (REGZA-
LINK type) input and the
Enable REGZA-LINK
menu
On
(
-
page 37).
a
Select
Picture settings
from the
PICTURE
menu.
b
Use
C
or
c
to adjust the
Contrast
,
Brightness
,
Colour
,
Tint
and
Sharpness
.
Black/White Level
increases the strength of dark areas of the
picture which improves the definition.
a
In the
Picture settings
menu press
b
until
Black/
White Level
is highlighted.
b
Press
C
or
c
to select between
Low
,
Middle
,
High
and
Off
. The effect depends on the broadcast and is
most noticeable on dark colours.
If there are lines or jagged edges in the film or programme
being viewed, selecting
Cinema mode
can help correct this by
smoothing out the picture.
a
In the
Picture
settings
menu press
b
to select
Cinema mode
.
b
Press
C
or
c
to select
On
or
Off
.
NOTE:
When a DVD with subtitles is being played this
mode may not work correctly.
Colour Temperature
increases the ‘warmth’ or ‘coolness’ of a
picture by increasing the red or blue tint.
a
In the
Picture settings
menu press
b
until
Colour
Temperature
is highlighted and press
Q
.
b
Press
C
or
c
to select between
Natural
,
Warm
and
Cool
to suit your preference.
c
Press
b
to select either
Red Level
,
Green Level
, or
Blue Level
then press
C
or
c
to adjust the settings.
To reset the current
Picture mode
setting to the default values.
a
In the
Picture settings
menu press
b
to select
Reset
.
b
Press
Q
.
Picture preferences
Black/White Level
MENU EXIT
1/2
Picture settings
Backlight 100
Picture mode Dynamic
Contrast 100
Brightness 50
Colour 50
Tint 0
Back Watch TV
MENU EXIT
2/2
Picture settings
Sharpness
Black/White Level
Cinema mode
Back Watch TV
0
High
Colour Temperature
Reset
On
OK
OK
Cinema mode
Colour temperature
Reset
MENU EXIT
Colour Temperature
Back Watch TV
Colour Temperature
Red Level
Cool
Green Level
-10
-10
Blue Level
-10
00GB_XV555D_Euro_kai.book Page 25 Tuesday, September 2, 2008 7:01 PM