User's Manual

10
SETTING UP
English
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the televisions remote control
if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and
operations, see pages 37–38.
For the setup shown above, you will need three HDMI cables
(see page 9).
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( )
• The HDMI3 terminal is located at the side of the television.
• This function is available with one PC and one AV amplifier.
It may not operate properly when a PC connected via an AV
amplifier.
Before controlling the device(s):
• After completing the above connections, set the REGZA-LINK
menu as you desire (see page 37).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
VIDEO
AUD IO
LR
R
L
OUT
IN
HDMI OUTHDMI IN
HDMI OUT
VIDEO
AUD IO
LR
R
L
OUT
IN
HDMI OUT
VIDEO
AUD IO
LR
R
L
OUT
IN
AV amplifier
Playback device
Playback device
00GB_XV555D_Euro_kai.book Page 10 Tuesday, September 2, 2008 7:01 PM